MY PHOTOS ARE NO LONGER TRANSFERRING TO MY COMPUTER. IT'S NOT THE CABLE, I BOUGHT A NEW ONE. I BELIEVE IT'S IN THE CONNECTION ON BOTH THE CAMERA AND ON MY COMPUTER. SPECIFICALLY ABOUT THE CAMERA, WHAT DO I DO?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
With the supplied USB cable, when connected to the computer's USB port the computer should see the camera as an external storage device. OR ALTERNATE WAY TO TRANSFER PHOTOS AND VIDEOS TO A COMPUTER If your photos and videos are stored on the memory card, then remove the memory card from the camera and insert it into an USB memory card reader. Connect this USB memory card reader and memory card into the USB port of your working computer. Your computer will see this as an USB Mass Storage Device or an external storage device; you can then open the folder on the memory card and copy the photos and to your computer. Memory card reader is a handy device and is inexpensive. You can copy photos from other cameras and you can also download photos off your memory card to someone else's computer without the need of installing any programs.
There are two ways to import your photos. One, your camera should have an sd card which you can eject and put into your computer. The sd card should have all your photos and videos in it. Typically the card is located near the battery and you can press down on it and it should pop out. You may also need a sd card reader or micro sd card reader if it doesn't fit in your computer. Second, your camera should also have a usb port, whether micro or mini or whatever. It should have a port to connect to your computer through a usb cable. In this case, just connect your camera to your computer and it should show up on your computer like an extra drive where you can go in and see all your photos. Also, the folder that holds everything is usually labed DCIM i believe. Hope this helps.
ALTERNATE WAY TO TRANSFER PHOTOS TO COMPUTER If your photos are stored on the memory card, then remove the memory card from the camera and insert it into an USB memory card reader. Connect this USB memory card reader and memory card into the USB port of your working computer. Your computer will see this as an USB Mass Storage Device or an external storage device; you can then open the folder on the memory card and copy the photos to your computer. Memory card reader is a handy device and is inexpensive. You can copy photos from other cameras and you can also download photos off your memory card to someone else's computer without the need of installing any programs.
Install the EasyShare software. Locate the CD-ROM that came with your digital camera. Insert the disc into the CD drive on your computer and follow the prompts on the screen to install the software. If you no longer have the EasyShare CD-ROM, you can visit Kodak.com to download the software and then install it as normal.
Connect the USB cable to your camera. With your digital camera turned to the off position, locate the USB cable that was included with your camera and insert it into the appropriate slot located on either the side or the bottom of your camera, depending on the model number.
Connect the USB cable to your computer. With your camera still in the off position, insert the free end of the USB cable that you connected to your camera to a free port on your computer.
Turn the camera on. Once your camera is turned on, your EasyShare software will appear and it will locate your camera and sync it with the software. If the software does not begin, turn your camera off, wait 30 seconds and then turn it on again.
Select a location for your photos. Once your camera is recognized by the software, a pop-up will appear asking where you would like your photos to be stored. The default selection is the EasyShare folder but it can be changed to whatever location you would like.
Select your settings. Before being able to transfer your photos to your computer, you must select some important settings. These are important settings such as whether you want your digital camera to delete the pictures as they are being loaded onto the computer. You can also select whether or not you want your camera to automatically start transferring your photos as soon as the camera is plugged in. The options will vary depending on what type of camera you have.
Transfer your photos. Once all of your settings are selected, simply press the button that says transfer. Your photos will then begin to transfer from your camera into the folder you selected earlier.
If you have a USB cable, connect to your camera and then connect it to the computer's USB port. the computer should see the camera as a storage device. You can then open the folders on the camera and copy the photos to a folder in your computer. Some cameras need a program installed on the computer so you can download the photos. The other way of downloading photos - remove the memory card from the camera and plug it into an USB memory card reader and then connect this to the USB port on the computer. The computer will see this as an external storage device, then open the folders on the memory card and copy the photos to a folder in the computer.
Try to install the Easyshare Software included in the package when you bought the camera, after that connect your camera the the USB port at the back of the computer using the USB 2.0 cable included also in the package.from there you can access the easyshare software and click on the transfer button on the software.
I suspect the problem lies with the HP software on your computer. You can download the HP Photosmart software from www.hp.com. Look for Software & Driver Downloads for R707 camera. You can still transfer your photos by setting USB Configuration in your camera, to Disk Drive in the Setup Menu.
This can occur due to 2 reasons.. 1) Bad USB port: Try connecting to a different USB port and see if it works. If it does then its probably a problem with the USB cable. 2)Bad USB cable: You can resolve this by Changing the cable or by getting a USB card reader. Specify the details of your Memory card and i will help you find a card readr that suits your card..