Question about Maytag PAV2300 Top Load Washer

1 Answer

Washer won't spin

Maytag washer approx. 8 yrs old. works fine till it gets to spin cycle. the agitator is froze. sometimes during spin i have raise lid because of unbalanced load and brake has squealed ( more than one time) and does motor suppose to have some movement on its base?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 116 Answers

Could be a worn belt,
Empty the machine and tilt backwards, you may need some help to do this.
Remove the belt and check, some times these appear OK but may have stretched.
Chech the agitator pully, try to rotate, will only move in one direction, see agitator moving as you do, get the person helping you to see this.
Check the motor moves freely on the tensioner, motor will appear to move 2".
Fit a new belt and try.

Posted on Apr 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag performa stops during agitate or spin


All washers have a safety switch on the on lid. There is usually a slot that a plastic pin goes into to activate the switch. These switches are high failure parts. The switch is located on the underside of the top deck. It should check 0 ohms when closed. You can also jump it but then it would NOT stop when the lid is open ie; during agitation or spin cycle ( a safety hazard).

Sep 01, 2012 | Maytag Washing Machines

1 Answer

Maytag washer model mav5920eww won't spin


It is either your gearcase or timer. They both are recommended to be replacd by a repairman.

Apr 30, 2012 | Washing Machines

1 Answer

My washer''s agitator spins but not the drum during spin cycle.


If you see the agitator moving, but not the tub..I guess, you have a defective transmission..this is tough without knowing a little more info.

May 20, 2010 | Maytag Legacy Series Top Load Washer

1 Answer

Maytag top loader washing machine


i believe i can help you,,but washers dont agitate in the spin cycle,,i believe you ment it wont wring or spin in the spin cycle..your lid switch is defective,,replace,,if need be i can talk you though,,onthejob

Dec 28, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag washer not agitating and not spinning fully


Pr obably a coupling between the motor and gear box, Take motor off and coupling will come out, re place it and it should be fine

Dec 03, 2008 | Maytag MAV4755 Top Load Washer

1 Answer

Maytag Performa - Loud Noises during Spin Cycle


This washer is JUNK!!!!!! We have the same washer (2 1/2 years old) and same problem. Tried to replace the bearing myself, no luck. So I called a repair man to come out and look at it. As soon as i told him the model number, they would'nt even come out. Very common problem for this washer. We are on our way to Sears to purchase a Kenmore.....GOOD LUCK

Sep 07, 2008 | Maytag Performa PAV2200

1 Answer

Burning Smell when spinning


8 yrs old....The LATs were the best models for Maytag...Maybe it's time to replace the belt..Slipping belts smell bad.

Jun 09, 2008 | Maytag Dependable Care LAT9416

1 Answer

Machine will spin; but not agitate


Really wont matter, your unit is way out dated and the parts are no longer available to the consumer..Sorry

Apr 04, 2008 | Washing Machines

Not finding what you are looking for?
Maytag PAV2300 Top Load Washer Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...