Question about Maxent MX-27X1 27 in. HD-Ready LCD Television

1 Answer

Maxent p4202yd05 The screen stays black, and the off-button is not working, same with the remote. There is no picture, we tried unplugging it for a while, but still nothing. Everything seems to be connected just fine. No blue screen or lines, just a black screen. Any ideas?

Posted by on

  • dfcdfc Jul 09, 2008

    I have the same problem. 

    I've got this TV a month ago. It's very annoying. 
    It was great for a month. 
    From last weekend, 
    Screen scratches and then 
    ,it turns out to be a black screen all of sudden every 3o min of play. 
    I have to turn the main power off and turn it on again.
    TV set is not even warm. Everything seems connected right. 
    I don't know what is wrong with it.   

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Have you tryed to find the "lamp" on it ... it sounds like your lamp has gone out you can get them from walmart or best buy or another type of electronics stores... they are normaly cheap compared to the price of a new tv and all it is is a light bulb for your tv... good luck to both of you

Posted on Oct 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maxent 42" flat screen M # p4202yd04


reseat the the LVDS cable inside the set. this is the cable that connects the main board to the panel. if that does not work replace the LVDS cable and the main board.

Mar 05, 2008 | Maxent MX-42HPM20 42 in. Plasma HDTV

1 Answer

Maxnet mx-26x3 tv toconnect toan HDMI input


Maxent ,mx 26 x3 turns on for 5sc.( all white) then picture flickers and screen goes black.. green light on throughout..none of button on the remote or the tv will work expect the power .i wonder is their a way to reset the tv?

Jun 10, 2011 | Maxent MX-26X3 Television

1 Answer

Has Maxent TV, model # P420142x3; The picture is smaller than the full screen. Wants to know how to get it to go to full screen.


Hi:
Check your remote of a button labeled (Format, Aspect Ratio, Screen size etc, you may have the tv in 4:3 viewing mode. If you are on a cable box and using its remote check for same named buttons.

Mar 10, 2011 | Flat Panel Televisions

2 Answers

Have a philips universal remote need to program a maxent tv


the code is 0206
Press and hold setup till light stays on
press TV button
enter 0206
press channel up
you are done

Apr 24, 2009 | Maxent MX-50X3 50 in. HD-Ready Plasma...

1 Answer

Green Screen


what you can do is take off the back pannel and there is a cord on the top of the board that looks like a computer board, there are many boards in the TV but the one I am talking about is twords the bottom where the video jacks plug in to the TV. Ok once you have located the pannel there is a cord on the top kinda tword the right side, it is many wires inside a black covering. What you need to do is just simply unplug it and plug it back in, do this as many times to try to get it to work. If that doesn;t work you can replace the cord and if that doesn't work then the screen is out and would cost WAY too much to fix, you could buy you a new name brand TV.

Dec 12, 2008 | Maxent MX-42HPM20 42 in. Plasma HDTV

1 Answer

Another question about maxent plasma monitor


Yes problem is repairable sounds like the mainboard (video) needs replacement because the rgb is part of this board along with the rest of your inputs this should fix your problem. There are some models where rgb is seperate but not many I will need the model number of your Maxent to be of further help.

Sep 09, 2008 | Flat Panel Televisions

1 Answer

Screen goes black, hit the input button and it changes....then black again


Thanks 42PULGADAS to party and its cost of shipment to Bogota Colombia could please provide to me to the cost in dollars of the screen of TV MAXEMT MODEL P4202YDOS thanks Attention(or attn). CARLOS EMILIO MONTOYA
EMAIL
ecografo@gmail.com

Mar 30, 2008 | Maxent MX-27X1 27 in. HD-Ready LCD...

2 Answers

The TV does not respond to the remote control nor the buttons in the front panel


Sounds like power supply switch needs to be changed to normal setting. If you are comfortable with electronics i will talk you through it if not you will need a tech or back to cosco it goes if you have a warranty.

Oct 10, 2007 | Maxent MX-50X1 50 in. Plasma Television

Not finding what you are looking for?
Maxent MX-27X1 27 in. HD-Ready LCD Television Logo

543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maxent Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68386 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you a Maxent Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...