Eziset washing machine will not start , the temp light bip and flash , any ideas

check the lid switch,it is activated by a magnet set into the lid,magnet may be gone or switch is faulty

yes go to the manufactures website and download the user manual and look in the trouble shooting guide for a possible answer eric

it appears the diagnostic computer has found a problem with the water inlet servos and may need replacing contact LG for replacement parts

Please list the model number of that machine. IT could be made by several manufacturers for Sears.

So the machine is not going through it's cycle?

I had the same problem before, but removing the kink in drain hose does the trick. Maybe yours is more complicated but try it.

When I had a problem with my simpson washer, with all 3 water temp lights blinking, it was a blockage in the pump, I emptied the washer and disconnected the host to the pump underneath, then cleared out the pump and put the hose back on, problem solved.

When mine had all 3 water temp lights blinking, it was a blocked pump, I emptied the washer, tilted it back, disconnected the hose from the pump (you will need towels) and clear out the pump, then put the hose back on.

5 beeps with the 3 temp lights flashing means lids not closed. or lid switch not working

i just fixed this problem. the magnet in the lid had come loose. I undid the two screws on the side of the lid put the magnet back where it should sit then i poured candle wax over it to hold it in place and working fine now.