Question about Audio Players & Recorders

1 Answer

I have a tascam CC 222 cassette compact disk player. sometimes I get a disk error message and cannot even play a compact disk. I there a reset or some other way to avoid this problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Hi James

It is probably an optics problem causing you symptom. Does the machine consistanly not play the any discs, or just particular discs. Either the lens is dirty, or you have an failure occurring in the optic block. CD lens cleaner discs are generally a waste of time, so I would suggest that you remove the lid, and clean the laser lens. with a cotton bud moistened with windex, then gently polish off with a dry one to be sure no smears are left behind. See how this goes. The other common problem with not playing discs is a lazy spindle motor, identified by the disc atempting to spin, but not getting up to speed. Try cleaning the lens first, and let me know if you still have problems.


regards
Graeme

Posted on Apr 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Re bad disc message. the disc is stuck inside the unit. Initializes, cannot eject disc, then gives a 'bad disc' message.


Hi. I would contact Arcam directly for this - there may be a reset action you could perform or they could diagnose the fault further.
HTH
http://www.arcam.co.uk/advice/contact.htm

Jul 13, 2016 | Arcam Solo Mini Compact stereo receiver...

1 Answer

HOW TO PLAY COMPACT DISC WHEN COMPACT DISC PLAYER IS ON?


You press the play button......
If you have multiple disks, press the appropriate disk and it will play

How to Use Six CD Changer

6 Disc CD Changer Instructions eHow

Feb 10, 2016 | Panasonic Technics 5 Disc Compact Disc...

1 Answer

I have a Technics Double Cassette Deck RS-TR212. On the rear it has Output and Input connections. Output goes off to the Amplifier. Can the Input be used to record or play from a record Turntable? I have...


your receiver has (or should have) input and output connections,, your turntable needs to be hooked to the receiver,, then with the output cables that feed your cassette player you need to go, in to out and out to in ( receiver output to the input of the tape player, and out of the tape player to the in on the receiver, while playing a record if you hit record on the tape player it will record the record, depending on the receiver it will show you the meter readings for either the in or out,, they vary

Apr 11, 2011 | Audio Players & Recorders

1 Answer

RCA am-fm steroe radio / dual cassette recorder & compact disc player model rp-9518A. when I try to play a disk it stops and then restarts again at all 5 stations need to know what may be the cause...


I assume that the problem occurs on the cd player. If this problem occurs only at this cd it's a disk problem. If it occurs on various disks try using a cd cleaner set, a wet one is better. Follow the instructions on the set. The main idea is to put one drip of the included liquid at the set (usually isopropyl alcohol) at a specific place (like small brush) on the disk surface and play this disk. This way the "brush" will clean up the laser lens and after that the cd player will be able to read the disks. BE CAREFULL not to put too much liquid on the "brush". In case you can, use a Q-tip with isopropyl alcohol to clean up the cd lens manually. In case this doesn’t solve your problem, the cd player needs laser lens replacement by a technician.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Sep 07, 2010 | Audio Players & Recorders

1 Answer

Problems with Sharp Blu Ray Player "copy protected signal"


Possible solution: You set up your remote to run your amp from the TV control, using the AQUOS Link. Even though your amp is out of the loop, it's still recognized by the TV. You might have to reset the TV back to default and run the AQUOS Link again.

Apr 19, 2009 | Pioneer VSX-D514 Receiver

1 Answer

CD player won't work


Firstly is it burnt or factory cd? Most factory cd players won't play a burnt disk.
If you have a store-made cd and it is not reading that, then the lens inside the player is dirty and needs to be blown out with a can of "airduster"

Feb 01, 2009 | Audio Players & Recorders

1 Answer

Compact disc player, put disc in, pressed play the display is showing 00 0000 but not playing


Ensure first that there is no disk stuck inside.

If there is a disk stuck inside, try pressing repeatedly the eject button while you power up the unit. Do this a couple of time.

If there is no disk inside, or you get this same problem with all disks, then the lens are dirty, try using a lens cleaning product like the ones here.


Oct 15, 2008 | Denon Audio Players & Recorders

1 Answer

Tascam da-30mk2 keep getting error 01 message. I have tried turning unit on and off still wont load tape. I have not turned this unit on for about 6 months prior.


On the top of the cassette mechanism there are two micro switches on one small plate with 3 wires. These switches "tells" the electronics where the door is open or close & activate the rest of loading mechanism (second motor). If only one of the switches is not working, you will get this error (that's was my problem). The switch who is responsible for closing was broken. I replace the switch and everything is working fine and smoothly now.
Good luck!

Jun 08, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98608 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69570 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...