I just got a new hp notebook. I have an ehterfas linksys router.

DEFAULT GATE WAY 192.168.1.1

That's because a stable connection is not being determined by the router. Call up you're ISP and inform them about the issue. There is probably a lot of distortion on you're phone line ! Ask them for a fiber optic upgrade !
Hope that answers your question !

Hi,

First of all check the DSL cable must be in WAN port of the linksys router. if it is done then do the following.

Actually DSL modem and Linksys router are conflicting with their IP class. Means DSL and Linksys routers are using the same IP class of 192.168.1.1 or 192.168.0.1.

You must change one's IP class because both are routers and if they having same class they cant communicate. Unplug the WAN cable of the linksys. open browser and put ip 192.168.1.1 or 192.168.0.1 any one which works for u in the address bar. Username and password hopefully be admin admin or just admin and password blank field.
when you access the linksys router configuration page then come to LAN configuration. If there IP is 192.168.1.1 then change it to 192.168.0.1 and if it is 192.168.0.1 then change it to 192.168.1.1 Save configuration and reboot your laptop and plug dsl cable to linksys WAN port.
Hope now this will work.


Regards;
Hasan

What is the brand of your modem? Some of the modems that AT&T gives out need to be configured to a Bridge mode before connecting it to a router.

access web interface configuration page http://192.168.1.1 user: admin password admin (this is by default). Go to basic settings. look for MAC clone. click this. power cycle modem and router.

you should be able to download from Linksys website

Press the reset button on the back of the router.  Also, delete the network connection on your computer.

after router you put one wireless access point then you can access your laptop

Usually DSL connections require ppoe while cable uses dchp You need to log into your router and change the settings

Microsoft uses IP Protocol 47 [GRE] for this secure tunnel. Provided that the PPTP Pass Through is set to Enable on the Router's Filters page and port 1723 is forwarded to the VPN Server, the Router will allow authentication and remote access into your network. The router will also allow you access remote PPtP networks from behind the router providing the PPtP Passthrough is enabled on the router.