Question about Printers & Copiers
When trying to print the display says "pls open cover". when I do, i see that all 4 ink cartridges are all the way left. but opening the cover up doesn't do anything. when i close it, it still says pls open cover.
scanner works though...
Posted on Oct 01, 2008
Posted on May 15, 2008
This is not troubleshooting, try going onto their website
Posted on Apr 15, 2008
Tips for a great answer:
Dec 16, 2009 | Kyocera Mita FS 1010 Laser Printer
Sep 10, 2009 | Kyocera Mita FS 1010 Laser Printer
Mar 19, 2009 | Kyocera Mita FS 1010 Laser Printer
A solution has been found. Thank you to Steveauh (Townsville)
Kyocera in their wisdom have used a foam insulator on the 3 solenoids that disintegrates over time regardless of use.
- Open the right side of the printer
- Disconnect all connections to engine board
- Remove engine board
- Remove plastic guard (white)
- remove all 3 solenoids
- Replace all pads on the solenoids that come up against stops
Registration Solenoid has 2 pads (1 against the solenoid frame and the other on a stop arm, the others just the frame pad)
- Keep thickness to around .4 - .5mm Too thick on register arm will cause early printing.
And that is it. The arms were being magnetically delayed due the metallic contact. It seems to be a regular problem in this chassis FS1000 to FS1030.
Jun 23, 2008 | Kyocera Mita FS 1010 Laser Printer
Mar 30, 2008 | Printers & Copiers
Mar 23, 2008 | Printers & Copiers
Dec 05, 2007 | Kyocera Mita FS 1010 Laser Printer
Nov 27, 2007 | Kyocera Mita FS-1030D Laser Printer
455 people viewed this question
Usually answered in minutes!