I had this happen a while back on my htc 8120 and how i fixed it was take a usb cable to a computer and cut the mini usb off in there u will find a green black and red wire well cut the green wire and strip the black and red wire u will notice on your battery there are four post 2 hots and 2 negs take the red wire and split so it makes 2 and take the negative and split so it makes 2 now plug the usb into ur pc and touch the red wires to the 2 positive and take the 2 blacks and touch them to the 2 negatives it will only take a minute or so all u are trying to do here is jump the battery so your black berry has just enough juice to start so u can charge it.
You have to go on the Blackberry website and download updates then plug ur usb in the computer and load updates and it will take a charge. (Takes about 30mins and you don't lose any info on your phone)This has happened to my 2 Blackberry's and a friends. Best a Luck.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The device is performing on low battery power and requiries full recharge possibly a couple hours. How to perform a device recharge
1. power off completely
2. connect to power source with cables provided, expecting to the last the duration of the full charge
3. a full recharge once the process is complete would display a message on the phone.
4. until then, do not unplug
my phone wont stay on and when it does come back on it shuts right back off. the LED light on the front keeps flashing red. ive taken the battery out and everything and nothing seems to work. help please!
the USB cable plugged in to a powered PC? Could be cable or battery
issue. Red light means that the battery is very low on juice. Return it
to where you got it from if you can't solve it on your own. you want a repair service
I have an answer for the 3-2 red light blink w/black screen. Remove the battery, hold the end call button and put the battery back in. The red light should stay on for a while now. Push and hold the call button and alternate with the end call button untill the hourglass shows. Allow some time to boot up. I stumbled upon this, so if this doesnt work, try simmilar procedrues. I did get mine to work. Good Luck, dont give up, it flashes that 3-2 code for a reason.