Question about Singer 2662
singer operation basics
Posted on Apr 15, 2008
SOURCE: singer 2932 automatic threader
A new part is faster and easier but sometimes the problem is a bent hook( the tiny part which goes through the eye of the needle). Remove the needle to see the part better and pull the threader down. Look in the very center of the threader for the hook. It is probably pushed to the right.Using a small screwdriver or other thin piece of metal, force the hook back to the center. Try it and continue until it enters the eye again. By the way, a Singer dealer can get this part for you for under $10.
Posted on Aug 11, 2008
You are threading the top of the machine incorrectly.
Make sure the needle is in correctly with the flat side to the rear of the machine, make sure to thread the upper and lower portions of the machine correctly. If this does not solve your problem, please respond.
Posted on Feb 12, 2009
The small hook that passes through the eye of the needle is bent or broken. If it is only bent it can be straightened with a small screw driver. If it is broken it will need to be replaced. Most dealers can get this part for you for about $5.00
Posted on Apr 11, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 20, 2016 | Singer Inspiration 4206
Feb 03, 2016 | Singer 8763 Curvy
Jan 11, 2014 | Singer Sewing Machines
Oct 26, 2011 | Singer 3116 Simple
May 25, 2017 | Singer 7442 Mechanical Sewing Machine
Apr 11, 2009 | Singer Sewing Machines
Feb 07, 2009 | Singer 132QRFB Mechanical Sewing Machine
Aug 09, 2008 | Singer Sewing Machines
333 people viewed this question
Usually answered in minutes!