Question about Fuji FinePix F20 Digital Camera

1 Answer

Focus Error Did you find a solution as my camera has just locked up the same way with the saem focus error message

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Check out this link: http:// www.digitalcamera-hq.com/digital-cameras/fuji-finepix-z1_question.html?qid=4289

After the basics (cleaning the lens, replacing the batteries, etc.), try dropping the camera on a carpeted area from about 2-3 feet. It worked for my Fuji A500 and 90% of the responders on the link. Everything on the web said it would cost ~$100 to fix. I was in the process of researching new cameras to buy and had nothing to lose by dropping it on the floor.
The error may be caused by debris in the zoom mechanism preventing it from working. Dropping the camera loosens the debris and voila!

Posted on Jul 07, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error maeesge and no auto focus


What message? if an FEE, perhaps you forgot to put the Diafragm marking to the greatest figure (22 or so) and forgot to put the lock on.
Next time, I think it could be very helpful you tell what error you see. Nobody needs to guess what you see.

Feb 04, 2014 | Nikon D80 Digital Camera with 28-80mm Lens

2 Answers

E:61:00 on the display


E:61:00 means "Difficult to adjust focus Inspect the lens block focus reset sensor"
The simple solution to fix that error message was to the let the lens fully extend and give the lens a good whack. Possibly this error message for this means, that the auto focus motor was past the maximum set point.
goodluck
and do rate the solution if helped

Dec 06, 2010 | Sony Cyber-Shot DSC-P71 Digital Camera

1 Answer

Focus Error


It's a message given when the internal lenses get jammed, possibly due to debris within the gears that move the focus. The "Focus Error" message can involve many FujiFilm models.

Nov 19, 2009 | Fuji FinePix Z100fd Digital Camera

1 Answer

Camera will not focus


yes i have the saem issue did you see the post about compressed air?

Nov 09, 2009 | Olympus FE-280 Digital Camera

1 Answer

Camera having error WARNING FOCUS LOCK


Hello there! Focus ring lock means that some how the focus ring is not turning freely. If it turns easilly then inside the optocoupler unit which reads out the movement of ring must be dust or damage.in the flexicable. Therefore somehow the camera should be disassembled got cleaned by pressurized air in case of dust and reassembled and hopefully it should work without problem.

Aug 12, 2009 | Panasonic AG-DVX100 Mini DV Digital...

1 Answer

Focus error message camera wontwork


I found this site to solve this problem. I got as far as tapping the lens, while turning it off. That worked but I still could not take pictures, so, I got the idea to put slight pressure on the lens when turning the camera on and was delighted to see that the error message was gone. Then, reluctantly, I snapped a picture...It worked. Hope this helps u 2..

Mar 29, 2009 | Fuji FinePix A500 Digital Camera

3 Answers

Focus error


The zoom and focus operate on screw thread drives. 1 of these has detatched resulting in "ZOOM ERROR" and locked the camera up. Dis-assemble lens and re-attach drive.

May 25, 2008 | Fuji FinePix S5200 / S5600 Digital Camera

1 Answer

Err message


If the error message is on the left hand side of your LCD monitor then your shutter is not coming on line and it might be the 'reset' switch in the back cover locking mechanism that needs replacing. If the error message is on the right hand side of the monitor then this is because the F - stop on your lens is not set to highest setting ( 16 or 22 ) . Set your lens to highest setting and check again to see if error ( FEE ? ) disapears.

Sep 21, 2007 | Nikon F65 35mm SLR Camera

Not finding what you are looking for?
Fuji FinePix F20 Digital Camera Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Parshiv Luthra

Level 3 Expert

383 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...