Prints test page when turned on - HP PSC 1315 All-In-One InkJet Printer

All right so you are getting print test copy every time you turn on or switch on your printer. You can follow the following steps to fix this issue:-

1.. Turn off the printer and wait 10 seconds. Turn it on again

2. Let the printer print the test page.

3. After the test page is printed, disconnect the USB cable connecting the printer to your computer. DO NOT turn off the printer while disconnecting the USB cable.

4. Place the test page on the scanner glass and press the SCAN button on the printer. The ON light will flash as the page is being scanned.

5. Remove the test page when the ON light is steady.

6. Finally, turn off the printer and wait another 10 seconds. Then turn it on again. No more printing test pages! Yay!

(You may now reconnect the printer to your computer via the USB cable.)

let me know if it fix this issue and helpful to you.

Hi,
there is a similar problem described on this site.
Try here:
http://www.fixya.com/support/t317689-hp_photosmart_c3100_series

I also found this on the internet which apparently works:

Please follow exactly and IN ORDER.

1. Turn off the printer and wait 10 seconds. Turn it on again

2. Let the printer print the test page.

3. After the test page is printed, disconnect the USB cable connecting the printer to your computer. DO NOT turn off the printer while disconnecting the USB cable.

4. Place the test page on the scanner glass and press the SCAN button on the printer. The ON light will flash as the page is being scanned.

5. Remove the test page when the ON light is steady.

6. Finally, turn off the printer and wait another 10 seconds. Then turn it on again. No more printing test pages! Yay!

(You may now reconnect the printer to your computer via the USB cable.)

Regards,
Steve
PS Feel free to vote for my answer or give a testimonial if I have helped.

Please follow exactly and IN ORDER.

1. Turn off the printer and wait 10 seconds. Turn it on again

2. Let the printer print the test page.

3. After the test page is printed, disconnect the USB cable connecting the printer to your computer. DO NOT turn off the printer while disconnecting the USB cable.

4. Place the test page on the scanner glass and press the SCAN button on the printer. The ON light will flash as the page is being scanned.

5. Remove the test page when the ON light is steady.

6. Finally, turn off the printer and wait another 10 seconds. Then turn it on again. No more printing test pages! Yay!

it depends on the error message why the test page won't print. If it just won't print at all, try to reseat the paper into the printer and turn off/on the printer then try to print the test page.

If it doesnt, then turn off the printer, remove cables. And then press and hold the power button on the printer for 5 seconds . Reinsert cables and turn on the printer and print the test page anew....

may be you chaged the catridge.
It is not the test page it is alignment test page just put the printed alignment test page paper on scanner glass and press the scan button to complete the process. It is alignment process which is printer is doing for self testing after installing new cartridge. Just finish the process.
Hope this helps. Please rate my response.
Thanks.
Have a good day.

I had the same problem and it was driving me crazy until I did this. Please follow exactly and IN ORDER.

1. Turn off the printer and wait 10 seconds. Turn it on again

2. Let the printer print the test page.

3. After the test page is printed, disconnect the USB cable connecting the printer to your computer. DO NOT turn off the printer while disconnecting the USB cable.

4. Place the test page on the scanner glass and press the SCAN button on the printer. The ON light will flash as the page is being scanned.

5. Remove the test page when the ON light is steady.

6. Finally, turn off the printer and wait another 10 seconds. Then turn it on again. No more printing test pages!

(You may now reconnect the printer to your computer via the USB cable.)

COURTESY:LILBLUEMIFI- A FELLOW EXPERT


Try this:

• Open HP Director
• On the main window select Settings>Print Settings>Printer Toolbox
• Open the Configuration Tab
• At bottom right click "Factory Settings" button then "Apply"
  

A configuration warning popped up explaining that would be changing settings used by the driver. Click ok.

Test pages are often printed by holding down one of the buttons on the printer. Make sure that none of the buttons are stuck. Look up in your printer manual which button is for test print and make sure it isn't stuck.

Hi,

I believe that after changing the ink cartridge you havent completed the alignment process.This Alignment test page will print everytime you turn the printer ON.To Complete the alignment follow my steps.

1.After turning the printer ON, wait untill the printer prints the Alignment test page.

2.Then place the alignment test paper on the scanner, facing down in a correct position.

3.Then press the Scan button(color) and wait untill the printer ON light stops flashing.

4.After the light stops flashing, take the paper out and the alignment process is completed.

Turn OFF and turn On the printer, it will not print the Test page again.try it and please let me know.Would really appreciate your rating for my solution.

Thanks
Riz.

i assume the cleaning method that you perform is offline (taking the cartridge our and clean them). I suggest you clean the head during the printer on.. try to perform below steps per the manual Cleaning the printer Printing the test pages Cleaning the print head I assume you do not have the manual anymore (no DVD) i list down the step below Its a bit long manual I suggest you download them from the canon website.. if you still have problem I can send to you the BJC 4300 manual Cleanning printer Make sure the printer is turned off before cleaning it. It is a good idea to unplug the AC adapter also. Do not clean the exterior of the printer with volatile liquids such as thinners, benzine, or any spray-type or chemical cleaners; doing so will damage the surface of the printer. When cleaning the printer, avoid the area near the print head on the BJ cartridge. Do not touch the print head. Ink may leak out and cause stains. Clean the printer regularly to avoid printing problems. Remove any ink mist or paper debris from the interior of the printer using a soft cloth moistened with water. Clean especially well around the platen area. If the rollers become dirty, you can clean them using a small soft brush. Clean the exterior of the printer with a soft cloth moistened with water. Clean away smudges and dust. Do not use paper products (such as paper towels or tissues) to clean the inside of the printer. Printing the Test Pages You can print these test pages to check the operation of your printer and your print quality. Test A This test prints a repeating pattern of characters. Demonstration This test prints a sample page describing the printer's features. Printing the Test Page From Windows You use the Test option on the Control tab in your BJC-4300 Printer Driver for Windows to print a self test, demonstration page, or a nozzle test pattern. Before selecting a Test option, make sure paper is properly loaded in the sheet feeder (see Automatically Feeding Paper starting on page 3-7). Click on the Test option and then click on the Print button. Printing the Test Pages Using the Operators Panel To print a test page, make sure the printer is turned off and paper is loaded. Press and hold the POWER button until you hear the number of beeps that correspond to the test page you want to print. Test Page Number of Beeps Pages Printed Demonstration 1 Continuous Printing Status Information 2 1 Page Test A 3 Continuous Printing Nozzle Test 4 1 Page When you release the POWER button, the test page starts to print. *All self-test prints require Letter or A4 size paper. Using a smallersize paper for a self-test print will result in parts of the printoutbeing printed directly on the platen. All self-test prints are printed in accordance with the current printing settings (font, printing mode, etc.) *Red- Information for technician not included in the user manual Cleaning the Print Head Your printer is equipped with a print head cleaning function to ensure constant high quality printing. Cleaning the Print Head From Windows If you are using Windows, you can execute print head cleaning from the Control sheet in the printer driver. Simply click on Clean Ink Head. 4300 Chapter 4 Page 6 Cleaning the Print Head Using the Operators Panel If you want to clean the print head from the operator panel, follow these steps: 1 Make sure the printer is turned on. Make sure the green POWER light is on. 2 Press and hold the RESUME button for at least two seconds until the printer beeps twice. The POWER light will blink for several seconds while the print head is being cleaned. Perform the print head cleaning only when you encounter a print quality problem. Unnecessary and repetitious cleaning will waste ink. If you execute the print head cleaning while paper is manually loaded, the printer will eject the paper and then perform the cleaning. 4300 Chapter 4 Page 7

There may be something initialised to print a test page everytime it starts, just remove printer, uninstall driver and re start. Re install drivers and connect printer when prompted or when installation has finished. This should revert to default settings.