Built in speakers don't work.i have sound only when i plugg the headphones

Go to control panel - sound - make sure your speakers are selected as the default device - known issue with vista upgrade to W7

sounds like it can be the hardware. try to uninstall and reinstall the latest audio driver then configure your speaker settings and volume settings. if this does not work, you may need to get the audio card or motherboard replaced.

Right click on your speaker icon in the lower right corner, select audio properties, you can lower the volume of the speakers when you use headphones or you can select a profile from the same screen and select the type of speakers you want to use; headphones, desktop speakers, etc.

Good Luck
C2Solutions

Sound cable is lose inside computer.

Sound is not working. Headphones would work just fine but the built-in speakers stopped working. try to update and reinstall the drivers. The speakers would sometimes work for a second when removed the headphone jack. sometimes it was a short in the jack connection or just a bad connector in the jack. Sooo, just plugg in the headphone jack a bunch of times and after about 20 seconds the speakers will work just fine.

Have you checked the speaker settings? Make sure that all settings are NOT muted. One selection that is muted maybe where the sound is generated from. Such as MIDI playback. Otherwise it has to be either a missing update/driver or damaged speakers.

first of all check whether the port is working correctly or not. For that use any other headphones. If they are working then ur present headphone set is gone. Or else if it is also not working then goto control panel -- sound and audio devices and then go to volume --advanced and increase the volume of all the devices present there..and correctly configure Sound Effects Manager which is present in the control panel ..in that u can configure the type of speakers u use or headphones ..there u adjust it to headphone..then the job is done..

sounds (pun intended) like you have your headphones plugged into the microphone input. See if you can change the spot they are plugged in...

good luck

Dear user,,

Pl go to control panel and select sound/audio device and click and see you see install sound device.

pl double click on speaker symbol at taskbar.

see volume controler and selecting hedphone device and see it is mute or not


Regards,

Ravindra Shah

i have this too. my speakers are altec lansing.
but using headphones and plugging them in and thats the only way i can here. it would probably work for you. I think if you buy speakers the sound will work out o them.