Question about Ricoh Printers & Copiers

1 Answer

Network error 10-61 - Ricoh Printers & Copiers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It is an error regarding your email server settings. Verify that the email server settings are correct (IP address, domain, etc)

Posted on Oct 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats 49.4c02 error?


Per HP:
49.xxxx errors are "communication errors" and can be caused by many things:Corrupted driver, corrupted firmware, corrupted print job, bad nic card (your printer has a built in network port), bad memory DIMM, bad formatter board etc etc.
Unplug the network cable, power off and then back on..........print a configuration page...........check that the printer sees the network port (if you see the IP address on the EIO page it sees it)...........if it doesn't see it you may have a bad formatter board (the network port is built in it).
If the printer works just fine while unplugged from the network, start replacing the network cable, otherwise you need to look into your network.

Oct 17, 2014 | HP LaserJet P4015N Printer

1 Answer

900 service rip software


The 900 error usually indicates a software or communications problem. If the 900 error occurs only when the printer is receiving information from a network or computer, you should contact your software/network support. If the error occurs when the printer is idle or not connected to the network or PC, there may be a printer hardware or connection problem. Sometimes a bad connection with an Internal Network Adapter/Network Card can cause the problem. The first thing to check is the base printer.


To check the base printer


Turn off the printer and disconnect every cable, except for the power cord.

Turn on the printer and see if the error returns.

If the error does not return, try to print a test page from the Test Menu.

If the test page prints correctly, the printer

May 05, 2011 | Lexmark Optra T610 Laser Printer

1 Answer

Error 900.44 .... RIP Software


The error relates to the system board / formatter.

R.I.P = Rest in Peace

Turn off machine for 10 minutes.

If error persists follow theses steps:

1. ) If the machine is networked disconnect the cable and power cycle. If the error doesn't come back up swap the network cable, with a good one.

2.) Firmware upgrade

3.) Replace the system board

Based on my experience it's either the network cable or the system board.

Oct 15, 2010 | Lexmark T642 Laser Printer

1 Answer

I have an HP 5500dtn Color Printer and I am receiving an 81.018 EIO Error, what is this?


From the HP Service Manual
DEFECTIVE NETWORK Card, OR Formatter Board
bullet_red.gifUnplug network Cable or Parallel Cable from the printer and then turn it off and then on, if error goes away then it was a bad communication from the network or the computer
This usually solves this error.
bullet_red.gifIf error persists while printer is disconnected from the network or computer, replace the EIO/Network Card and or the Formatter Board

Nov 24, 2009 | HP LaserJet 5500dtn Color Printer

1 Answer

Network error CE-02


You didn't tell me enough about the problem. Are you trying to scan from a PC or to a PC? The problem is that the network address changed when you moved the printer. You can fix this by correcting the network address

Nov 23, 2009 | Sharp AR-M162 All-In-One Laser Printer

1 Answer

Fax sending problem - error code 81


Greetings John,
This error is for 81 Z no user profile for pre-process.81 error indicates that a temporary error has occured while testing. If cycling the power does not solve the problem you should replace the formatter board.
Also It could be a problem with the power supply or DC controller. There may fluctuating power issues with the formatter. Also did you replace the network card after replacing the formatter or did you use the same network card that was replaced before the formatter was replaced. It may be the new network card may have been damaged by the old formatter and gives the same problem now, and using the damaged network card may have messed up the formatter again. To test this replace both formatter and network card together.

Regards,
TechSup1

May 01, 2009 | HP COLOR LASERJET CM3530FS UP TO 31/30PPM...

2 Answers

Samsung printer error ssg_thnk-32 diag error


There might be a firmware update on the printer, try that. Also did you try another network cable? Sometimes they go bad.

Apr 18, 2009 | Samsung SCX-4300 Monochrome Laser...

1 Answer

Xante Ilumina 512 error code


this error can be caused by a new or existing PC on your network. EXAMPLE: the network settings on new DELL pc's are default set to control the network and repair any conflicts..it seems dells dont like Ilumina's, and they get this error code.
Disable the network control function in the DELL settings.
And this error will not re appear until another dell is installed.

Jun 04, 2008 | Xante Ilumina Digital Color Press Printer

2 Answers

SYSTEM ERROR 09A008 007A07A3- WHAT DOES THIS MEAN?!?!?!?


Either network card or hard drive.
remove the network card and turn the machine on.
if the error persists then replace the hard drive.
If the error does not come back then replace the network card.
Good Luck!

May 13, 2008 | HP DesignJet 1050c InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Printers & Copiers Experts

quennie732

Level 2 Expert

393 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

181 Answers

Are you a Ricoh Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...