Konica 7020 error code f-26-2

Yes I stated what I recommended to do in your last post!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Did you blow it up, probably not.

Click this link for the everything.

http://www.kmbs.konicaminolta.us/content/support/supporthome.html

1. Choose the Category "Office Systems"
2. Choose the model "7020"
3. Click the error next to the Model dropdown box.
4. Choose the 1876KB user manual called "User Manual for 7020, 7025, 7030 and 7035"

Or click on this link for the specific manual.

The error codes you seek are not in the manual, you'll have to call Konica to tell you what they are ... call Konica at (860) 683-2222.

Hope this helps. Rate a fixya!

DO THIS once because you are re-setting the FUSER it can catch on fire that will ruin a perfectly good day!!!!! Get a tech out to look at it.

Turn on the main and sub power switches.
Keep pressing the * button until the message
"Please enter service password." appears.
Input 9272 as the password and press the
[Start] key. (The password is fixed and cannot
be changed.)
[Mode Select Menu Screen]
Press 2 and 5 to select 25 mode. Then select soft switch. Set 3, then set 1 then change 1 to 0. to clear the code.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Power off the machine. Now hold down the 2 and the 5 and power on. Mode 25 screen appears. Touch the Soft switch tab in the first box on your left you will put a 3 in the middle box you will put a "1" the third box you will change the "1" to a "0". Close out to original screen and power off the machine. Wait 10 second power on should get your ready to copy, if the code does come back DO NOT RESET the machine again! It is indicating a problem the code you are resetting is the fuser and it can catch on fire! That will ruin a perfectly good day!!!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Hook up control see what code is desplayed , refer to on line error code chart for resolution.

The printer stops working & showed me an error code F-26-1

www.fixya.com/.../t16683015-printer_stops_working_amp_showed_me

Feb 20, 2013 - the printer stops working & showed me an error code F-26-1 , How can I repair it ? I think it s relating to a - Konica Minolta 26NA53040 7130 ...

Konica Minolta 26NA53040... Repair Questions - Fixya

www.fixya.com/.../p4700437-konica_minolta_26na53040_7130_7025_...

Konica Minolta 26NA53040 7130 7025 7020 Oem Lower Fixing Roller Assy New ... Theprinter stops working & showed me an error code F-26-1 , How can I ...

Have you checked the fuses in the plug and on the fuseboard in your house?

i have a konica 7022 it say call service code F-35-3, what's wrong with it, help me.

f-26-3 is a toner density sensor problem. clean the sensor. It probably got dirty when you took the drum out. It senses how much toner to dispense. Lawrence Its on the d.v. assembly by the drum

Hope is last to dye. Be calm and contact the technician with best references or Authorized Sony Service. If you need more info please advice