Question about HP LaserJet 4350 Printer

1 Answer

Hp 4250 error code 50.3

Can you help me fix this problem my printer showing 50.3 error i was changed new fuser but still same error thanks master

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

FALSE FUSER OVERTEMP INDICATION, POWER SUPPLY THAT DRIVES THE FUSING UNIT. MODEL 8150 DOES THE SAME THING. TRY TO GET A REFUND ON THE FUSER?

Posted on Jun 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Veritcal streak on left side of paper. Streak is light gray


Hello,

Vertical streaks are usually caused by a bad fuser. The fuser roller has a teflon caoting and when this coating gets scratched or worn it causes image defect to appear on the paper. The fuser for the 4250 is part number RM1-1082 and you can get them from Amazon.com or other online sites. Here is a link to an article that shows how the fusers can cause the vertical image defects like you have.

http://www.ccl-la.com/blog/index.php/how-to-fix-hp-laserjet-2100-vertical-lines-on-print/

Feb 12, 2013 | HP 4250 Monochrome LaserJet Printer

1 Answer

Error 50.1 hp 4250 printer


This is a fuser error, it could be a faulty thermal sensor on the fuser but can also be caused by a faulty power supply.
This model commonly has dry joints in the power supply which can be fixed depending on your level of skill.

Mar 02, 2012 | Printers & Copiers

1 Answer

Hp 4m shows service error 50


Hello,

The service 50 error indicates a bad fuser assembly. You can get one on Ebay for less than $50. To replace the fuser just open the door on the back of the printer, inside you will see the fuser, unscrew the 2 screws and pull the old one out. Insert the new fuser and screw it down, power on the printer and you should be good to go.

I hope this helps, If so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com
tech@ccl-la.com

Nov 13, 2009 | HP : HP4 Laserjet Printer

1 Answer

HP Laserjet 5m, appear error code 50...please help.


Error 50 will be a faulty fuser unit or DC controller board. Try replacing the fuser unit.

May 20, 2009 | HP LaserJet 4m plus Printer

1 Answer

Error 50 code, have replaced fuser and checked connections


I am not sure this will stay fixed but after i cleaned the pcb's and checked the connections and let the unit sit overnight the printer works just fine. If this does not stay fixed I will contact you again.
Thank you,

Apr 14, 2009 | Printers & Copiers

1 Answer

Fuser 50.1 error on HP 3500 printer


From HP Website:
50.X FUSER ERROR Description A fuser error has occurred. Action
  1. Turn the printer off.
  2. Verify the fuser is properly installed and fully seated.
  3. Turn on the printer.
  4. If the message persists, contact HP Support.

Mar 23, 2009 | HP Color LaserJet 3500 Printer

4 Answers

Hp 4350 error code 50.3


I have just changed the fuser unit and the printer is still giving the
same error [fuser error and low heating] Kindly help.

Maxwell Mpundu@technet.co.zm

Apr 21, 2008 | HP LaserJet 4350 Printer

2 Answers

Hp 4250 paper jam erro


Is it a new or refurbished fuser? Where exactly does it jam. By trays, registration or before fuser? Problem can be with various sections. Need to know more.

Feb 12, 2008 | HP LaserJet 4250dtn Printer

2 Answers

HP LASERJET 4250n PRINTER-PROBLEM WITH PAPER JAMS AND "FUSER ERROR"


Put a maintence kit in your machine, easy install, everything just clicks in, Every 200 000 prints it should be done, it includes the fuser, all feed rollers, sep pad and transfer roller.

These are great printing machine, they only ever need the MK and on this model a fuser drive gear wears and get noisy, but once that has been done once, it is ok from then on.
KIts seem expensive but they are meant to last 200 000 prints and usally do. These are one of the best most reliable printers in the market.

fee693c.jpg LINK to part info

Jan 09, 2008 | HP 4250 Monochrome LaserJet Printer

1 Answer

Hp 4250 GHOSTING


Are you telling the machine that paper type is letter head or envelopes, It must be done, it changes temp of fuser to suit the paper type, no it is not a power supply problem change paper type to card stock/thick/letterhead etc to suit then machine will adjust temp to suit.. ie file, print properties paper type.

50.2 fuser error replace fuser.

Dec 06, 2007 | HP LaserJet 4250n Printer

Not finding what you are looking for?
HP LaserJet 4350 Printer Logo

1,190 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...