Question about Computer Servers

1 Answer

Mandrake Two of my hard drives crashed on my Mandrake, I think it was the RAID 0 problem what must I do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Hi Awene,

Due to yours is RAID 0. I don`t think you still can recover any of your data if you have backup before then you are very lucky. I recommend that you should use RAID 3 or higher. Please refer to this link for more details http://www.acnc.com/04_01_00.html
cheers

TY

Posted on Apr 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Following arrays have missing required members and cnnot be configured: Array#1-RAID-0


RAID 0 will fail with a single drive loss. So if you lost a drive, you lost the array, and most likely your datas. It should never be used in a production environment, because it can not be rebuilt.

http://www.acnc.com/raidedu/0

Feb 25, 2013 | IBM x3400 Server

2 Answers

Ugrade of DL380 G4 Server HDD Raid Array 36GB --->146GB Required


Do a ghost on the first hard drive install ghost on new hard drive and replace, I can provide more details on procedure just ask

Jul 25, 2008 | HP Compaq ProLiant DL380 G4 Server

1 Answer

I want to install a new scsi but when my os windows small business server 2003 it gives me "setup either detected multiple disk in your machine that are indistinguishable or detected raw disk(s). Setup has...


using the ACU (array configuration utility) create a raid 0 with this drive after the hard drive is being formatted and is configured as raid 0 (no redundant) restart the server and the hard drive should be detected as a new logical volume with a assigned letter "D" "E"
ACU

Jul 30, 2010 | HP ProLiant ML370 G3 Server

1 Answer

Confuguring raid5


Hi

You would need 4 Hard disk drives in total. you would need to create 2 RAID 0 (striping) and then Mirror them (RAID 1). to elaborate, HDD A&B will be at RAID 0 as well as HDD C&D. after, you would have to Mirror your two RAID 0. (raid 0+1 is also known as raid 5)

Hope this helps.

Jul 09, 2010 | IBM x3400 Server

1 Answer

I just managed to mess up my 1600 SC with Linux Mandrake. I want to change it from raid 5 to Win 7 and turn it into a JBOD. I can't get it to recognize the dvd player so the win disc won't fire up...ideas?...


Is there a RAID card Eg PERC installed? If so, did you use the hardware raid setup? Also, Why do you want to put Windows 7 on a Server? Have you thought about Windows Server 2003 or 2008?

Open her up and check all the connections and also the BIOS settings. Does the DVD drive appear in the BIOS detection screen? I would suggest tackling the DVD issue first! Maybe that you need to change the order that it boots so that the DVD drive is first.

Dec 16, 2009 | Dell PowerEdge 1600SC Server

1 Answer

After setting raid windows 2000 pro boots to blue screen with UN- ACCESIBLE BOOT DEVICE


There's a good chance one of your hard drives have become corrupt from it. In the past I've had a few problems that've caused this.

a) I had a hard drive that crashed and I replaced it with an older one.
b) Your RAID configuration memory is shot.

and a list of other but this is the main things.

Odd's are you will have to whipe off the drives and try to re-configure them again. I've dealt a number of times with this and the easiest solution always seems to be to just reload it.

Another thing you could do is try picking up BartPE or ERDCommander. They will act as a boot device so that you see if your computer is even reading the hard drives. If it can't even see the drives odd are something is installed incorrectly and just needs to be started from stractch.

Hope this helps a little
-JD

Aug 12, 2009 | IBM eServer xSeries 346

2 Answers

I have hp proliant with raid 1+0 .I have 2 hard and usr in option


Sometimes shortened to RAID 10, RAID 1+0 is a particular combination of two different RAID levels: mirroring (RAID 1) and striping (RAID 0). The appeal of RAID 1+0 is simple: mirroring gives you the highest level of availability RAID offers, with the fastest rebuild times when a disk fails; while striping - using the proper chunk size - is the basis for high-performance I/O.

Jun 09, 2009 | HP ProLiant DL380 G4 Server

1 Answer

Scsi raid with battery backed memory for pweredge 2550 server


if my memory serves me correct i think this server uses a onboard (3di) card it is set in the bios to use the raid configuration, under integrated devices .make sure this is so ,as it boots press f2 key to enter.If this is so exit.next step is to shut the machine off pull the drives away from the backplain not completly out. Power up if it starts laoding the raid configuration,once the scan is complete it will give you a container not found error,now here is what you can do go in i think its control m or r,anyway look at the configuration and what raid you set it up for.write down the drive number 0-etc.ok the next move is the raid key a little device that sits on the motherboard beside the raid dimm reseat this,now you may want to replace the raid dimm or if you have a exact match for troubleshooting purposes you may try this.
Good Luck

Feb 05, 2009 | Dell PowerEdge 2550 Server

3 Answers

Drive array problem


Hi Nick ,

As of now you can Select "F2" to accept data loss and re-enable logical drive. This Load OS Normally .
It seems that one of the HDD in the RAID 5 has failed , Did you notice any LED indications like red or amber on the HDDs ?? if so get that hdd replaced . Make sure the Failed HDD is replaced .
You can run the Array Diagnostic Utility from HP System tools to check the Failed Drives and also frimware version of the controller . If the frimware is not latest Update it from HP website. DL380 G4 should have Smart Array 6i controller .

Hope This was Helpful
cheers :)

May 17, 2008 | HP Compaq ProLiant DL380 G4 Server

2 Answers

Raid w/ hard drive defunct


Well lets make some assumptions
1. You have a Raid 5 System
2. You only have 3 drives in the Raid ARRAY
3. Only 1 drive has failed

To fix the problem you should only need to Replace the Failed Drive
Then start the raid management software or bios
Rebuild the array

If you have more than 1 drive failed in a RAID 5, and still must recover the data it is possible. But very expensive. Still fixable however.

Sep 23, 2007 | IBM xSeries 226 Server

Not finding what you are looking for?
Computer Servers Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Servers Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Computer Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...