Question about Sharp AR-5316 Advanced Digital Imager Copier

2 Answers

Remove error in AR-5316

Copier Ar-5316 hsa blinking error 4H. How can i remove this error. Please send me help and error code on my email kuljitburj@gmail.com.

Thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to service mode ( c intrupt # intruppt .your display will dis appar then press 16 and 14 turn off then turn on hope it work for you.
good luck

Posted on Nov 05, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.

  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.

Posted on Apr 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Sharp AR 5316 Maching Toner LED Light 3 Min. Blinking, and them start. Please Toner Curm reseting code.


Have you tried to replace the toner???? Are you sure the light that is blinking for the toner?????

Jan 13, 2013 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

Missing my AR 5316 Driver CD. Pleass Send this Driver software my email address.


Drivers for Sharp AR-5316 are available at Sharp Official Support site. Make selection as under: -

Select
AR5316 > Windows (XP, Vista, Windows 7 etc) Depending upon the OS you have.

Good Luck!
Appreciate generously, if the solution could have been of any help!
CreativeTECH

Jan 10, 2011 | Sharp AR-5316 Advanced Digital Imager...

6 Answers

Sharp ar 5516 printers error h5. h4


hi,I have error code L h on my coppier sharp 5516. your help please.

Aug 05, 2010 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

My sharp copier AR-5316 has the problem. Error code 4H appear and cannot copy.


Hello sir; You need to do a reset procedure as follow; Press "#", "interupt", "C", " interupt". then enter 14 press start, machine go back to normal.

Oct 09, 2009 | Sharp AR-5316 Advanced Digital Imager...

7 Answers

SHARP AR-5316 MAINTENACE RESET


To reset maintenance codes requires going into service mode. This should only be done by an authorized trained technician as changing or adjusting something in this mode could create all sorts of problems you dont want to deal with.

Mar 17, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

My Sharp - COPIERS- AR-5316 keeps blinking 4 immediately i power it.


if Your copier is 4H blinking it is over heat
C# interrupt # and then 14 start key 000

Mar 05, 2009 | Sharp AR-5316 Advanced Digital Imager...

4 Answers

Code H4 comes up when the sharp copier ar-5316 is switched on. it cannot be use. what shall I do to solve this problem of error code H4.


Hello sir; H4 code require reset procedure as follow;
1, press"#" "interupt" "c" "interupt" these 4 keys.
2, enter 14 , then press start
3, turn power off and back on .

Jan 28, 2009 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

ERROR CODE 4H ON AR-5316


There is a problem with the fuser unit ( exit where it gets hot), unfortunately you need to replace
either 1- thermofuse, 2- thermistor, 3- heater lamp

Sep 10, 2008 | Sharp AR-5316 Advanced Digital Imager...

13 Answers

Error code 4H on sharp ar 5316


WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.

Feb 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Printers & Copiers Experts

George Mclaughlin

Level 2 Expert

330 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Vito Suglio

Level 1 Expert

23 Answers

Are you a Sharp Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...