Question about Speed Queen AWS52NW Top Load Washer

2 Answers

Kelvinator or (Speed Queen Top Load washing machine)

We have replaced the belt on this machine because the technician said it needed replacing, but now the machine stops ans starts taking forever to complete the spin cycle. It is as if there is a cutout switch, when it starts again you hear a quite loud click, then the machine will spin for just a few seconds and then stop.

Posted by on

  • bill09 Mar 01, 2009

    will go through cycle but stops and will not drain

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Speed Queen AWM373W top loader with the same problem. We recently had the kit and belt replaced because it was leaking water. That is fixed now but it takes forever. The other night I tutned the drum by hand and it worked fine. Did not had the same problem since but I am watching it.

Posted on Jul 07, 2008

You probably have the wrong belt, and its to small? Go to repairclinic.com or google Kelvinator parts. Order the correct belt.

Posted on May 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How old is this model # AWS45NW ,Serial #040917265 Speed Queen Top Load Washing Machine . What type of wear and tear repairs can be expected down the road for normal use ?


That unit came out in 2006 it is still being sold. Motor and transmission are most common failures. The cost is 250 to 300 the most replaced item is the drive belt for 30 dollars

Jan 17, 2016 | Speed Queen AWS45NW Top Load Washer

2 Answers

Will not spin fast, when it spins you can rase lidmby pass door switch and stop itfrom spinning


  • The motor coupler may be broken. Many Whirlpool®-manufactured washers use a small, relatively inexpensive motor coupling. It's plastic and rubber and is mounted to the shaft of the motor on one side, and to the transmission on the other. Over time, the coupler wears out and fails. You may need to replace it.


  • A belt may be broken. Many washing machines have one or two belts. If a belt is broken or badly worn, you need to replace it with a genuine belt from the manufacturer. (Some washing machine belts are designed with special characteristics not found in automotive belts.)


  • The clutch may be worn. If your washer is a GE, it may use a clutch to come up to the proper spin speed. As the clutch wears out, it may prevent the unit from spinning well or at all. If the clutch is worn, you need to replace it. For this job, you probably want to hire a qualified appliance repair technician.


  • The drive motor may be defective. Many washer brands use a reversing motor. For agitation the motor runs in one direction, for spinning and draining, the other. It's possible for a motor to burn out in one direction and continue to operate in the other. If this happens, you need to replace the entire motor.


  • The transmission may not be shifting properly. Older washers produced by Whirlpool® have a transmission with an electro-mechanical shifter. If the shifter becomes even partially defective, the unit may drain the water but not spin. This is a complex system, if your washer has a shifter problem, you may want to hire a qualified appliance repair technician to repair it.


  • The spin bearing or basket drive may be worn or seized. These components allow the inner tub to spin freely inside the outer tub. When this is the problem, you usually hear a loud sound during the spin cycle. Call a qualified appliance repair technician.
  • Oct 22, 2008 | Roper RAS6233KQ Top Load Washer

    1 Answer

    Whats tricky about the remover and replacement?


    How to Replace a Washing Machine Belt: 12 Steps (with ...

    www.wikihow.com > ... > Washing Machines and Dryers

    wikiHowLearning how to replace a washing machine belt can be tricky, but will save you from.... specifics of the location and method for removing and replacing the drive belt. ...your washing machine, then your model has what is called a direct drive.

    How to Clean a Washing Machine Inlet Screen ' The Family ...

    www.familyhandyman.com/...repair/washer...repair/...washing-machine...
    A washing machine that takes forever to fill may have an inlet screen clogged with mineral deposits and tiny ... How to Repair a Leaking Washing Machine ... The onlytricky part is removing the screens without wrecking them (Photo 1).

    Speed Queen & Amana Washing Machine Repair Manual ...

    www.appliancerepair.net/washing-machine-repair-8.html
    Online washing machine repair manual CHAPTER 8 - written ESPECIALLY for do-it-yourself ... Belt driven pumps are replaced by simply removing the pump mounts. Tension ... Pump or belt changing on a direct drive machine is a little trickier.

    How to Remove Mold and Mildew from Front-Load Washing ...

    www.todayshomeowner.com/how-to-remove-mold-and-mildew-from-fr...

    Jan 10, 2016 | Washing Machines

    1 Answer

    My Frigidaire Affinity front load will start any cycle but continuously stops and takes forever to resume the cycle. How can I correct this or get it to do a full cycle without the frequent pauses? It's...


    Good Afternoon Shae, thanks for your post!

    From what the information you have provided your Frigidaire washer will start, then stop and take a long time to resume the cycle. It sounds like you could have an issue with your control panel, door latch, or sensor. Since it could be anyone of these underlying issues I would suggest contacting a professional technician for a proper diagnosis and repair. This will help you avoid any unnecessary part purchases. Hopefully this information is helpful. -Matt

    Feb 25, 2015 | Frigidaire Washing Machines

    1 Answer

    Fix agitator on a speed queen awm290


    Is the drive belt in good condition?
    Does the machine spin dry?
    Is there water leaking from the bottom?
    I suggest the gearbox needs to be replaced. Another sign is if the machine is noisy when it is washing (agitating)

    Jul 04, 2014 | Speed Queen AWS45NW Top Load Washer

    1 Answer

    Why did Craftsman LT2000 stopped moving? Engine starts and blade engages fine.


    The transmission drive belt is a separate one from the blade belt. The clutch pedal when released puts tension on the transmission drive belt so it tightens up and drives the gearbox pulley by way of a large spring. Make sure the spring is ok. The belts don't last forever and probably needs replacing looking at the age of the machine. That is a fun job as it is right up under the machine and runs from the engine pulley right back to the top of the transmission. You have to drop the deck right off and I usually find a tree with a large branch and haul the front up with a rope or winch so the mower is vertical. Makes it easier to work on. Drain petrol first though. Hope this helps otherwise get a mower shop to do it for you if you feel it's to much of a task. Good luck.

    May 19, 2014 | Craftsman Garden

    1 Answer

    Motor get hot and stop this is maytag name but as speed queen iner part


    First check the drive belts for wear and replace them if necessary. It is important that the belts have neither too little nor too much grip. If they are fine,then check the bearings of the motor and the drum. Lastly check the motor, it may need to be replaced.

    Jul 06, 2011 | Speed Queen AWS52NW Top Load Washer

    1 Answer

    Kenmore 70 belt drive starts to spin then stops then will try again an stops but is slow


    if toothed belt,teeth worn away ,need new belt or motor failing.Check belt,,if in good condition inquire about replacement motor and costs of replacing it against cost of new machine,??,,hope this helps..

    Jul 05, 2011 | Kenmore 22422 Top Load Washer

    1 Answer

    I have a top loading Speed Queen. The drive belt broke and I need to replace it. How do I remove the outer metal cover to get to the working parts


    there are 2 5/16 screws located at the bottom of the front panel. Remove the screws and pull the front panel away from the machine on the bottom.

    Dec 19, 2010 | Speed Queen AWS44NW Top Load Washer

    1 Answer

    How do you replace the belt on an indesit moon washing machine? I have managed to take off the belt fromt he motor and the drum, but trying to get the replacement band back on it very hard - if it just...


    Hello,
    Most belts for washing machines are of the stretch type and they will take a lot of force to get on.Try to put on motor pulley first the try on drum pulley one side or other whichever feels easiest as you start it on pulley start turning drum pulley whilst holding the belt to stop it slipping,keep turning until it goes on then line up to centre of drum pulley.

    Hope thet helps.

    May 09, 2010 | Washing Machines

    Not finding what you are looking for?
    Speed Queen AWS52NW Top Load Washer Logo

    646 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Speed Queen Washing Machines Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8205 Answers

    Chris Hall
    Chris Hall

    Level 3 Expert

    842 Answers

    Paul Bade

    Level 3 Expert

    1413 Answers

    Are you a Speed Queen Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...