Question about Maytag MAH6700AWW Neptune Front-Load Washer

1 Answer

Maytag Neptune Error Code LO

What does it mean?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Latch open it means your latch on your door is not connecting It happened to me when I switch the door to open the other way your washer wont start or will stop mid cycle if the connection isn't made it is simple to fish hopefully you haven't already paid for someone to come to fix it :)

Posted on May 30, 2008

5 Suggested Answers

  • 32 Answers

SOURCE: how to fix the LO error code on Maytag Neptune front load washer

Not really bad news. The unit requires a door lock assembly.

Posted on Feb 23, 2009

  • 1 Answer

SOURCE: MAYTAG NEPTUNE ERROR CODE OE

I have a Samsung Washer and the water would just keep pouring in and not stop. Eventually the OE error code would show and I would have to stop and turn off the water.

Thanks so much. You can fix this problem yourself. There are only two screws holding this part on. It is easy. I bought my part here.

http://www.appliancepartspros.com/part_details.aspx?image=0&part_id=4044218

Nobody stocked the part for the samsung but I found out that the Whirlpool part was exactly the same.

Posted on Sep 25, 2009

  • 96 Answers

SOURCE: maytag neptune tl

Code OP means lid is open. If it really isn't, then the problem is with the switch that sense whether the lid is shut or not. Could be bad switch or bad connection.

Posted on Jun 08, 2008

  • 6 Answers

SOURCE: I have a maytag neptune

your machine has a fill problem either your screen is pluged on the water hose either hot or cold or your water is turned off.

Posted on Sep 22, 2010

Illeagle
  • 525 Answers

SOURCE: My maytag neptune Model #: MAH5500BWW is flashing

The error code you describe is not listed in Maytag's book of codes. The link below will take you to Maytag's website error code page where you might be able to match it up.
http://maytag.custhelp.com/app/answers/detail/a_id/2885/session/L3NpZC8yY3lEMjNEag==/sno/0

Posted on Jul 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Maytag Neptune washer has "np" flashing. The door is locked and the cycle is not complete


Are you sure this is not an nd and not an np flash code? If so then the code stands for no drain, likely something is clogging the washer pump inlet.

Aug 20, 2016 | Maytag Neptune Washing Machines

1 Answer

What does the code od mean?


The "od" code appears when you must open the washer door. The Maytag Neptune washer requires that you open the door between cycles.

Read more: Maytag Neptune Washer Error Codes ' eHow.com http://www.ehow.com/list_7170826_maytag-neptune-washer-error-codes.html#ixzz2GZKry68n

Dec 30, 2012 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Im getting a "LO" error


Hello,

The LO error code means the LID OPEN

Here is what the techicians service manual say to check

LO Door failed to unlock Door lock monitor switch does not indicate to the machine control board that the solenoid in the door lock mechanism retracted and unlock the door. 1.Check for debris inside inside the door lock mechanism, which may be jamming the lock solenoid. 2.check wire connections in harness leading from machine control board to door lock mechanism.
3.Check the door lock monitor switch for welded contacts.
4.Replace responsible component.

Jul 30, 2011 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

I have a Maytag Neptune TL washing machine, it runs almost all the way through they cycle but on the last spin cycle it stops and the digital display shows LO. Can you help me?


LO error code:

Locked: Lid has failed to unlock -

the machine has repeatedly tried to

unlock the lid. Push lid closed to

make sure nothing from the inside is

pressing against the lid, preventing

unlocking.

Is that the issue? Have the Lid locks failed to release and you can't open the Lid?

Or have the Lid Locks released so you can open the washer lid but the error code LO remains?

If you want to DIY I will help you.

Google this Neptune TL Washer FAV6800AWW

This is a DIY Appliance repair forum no cost and you can get the Service Manual from this site.

In the Sticky: Neptune TL Washer FAV6800AWW 5 post down you will find a link to the Service Manual. You absolutely need the Service Manual to DIY issues with the machine. It's not the best SM but will get you started. I also have repair post in that sticky to help with the most common issues with the machine.

In that Sticky are other what I find to be common Service Repair notes for issues with the machine.

If you need help post in the Maytag/Magic Chef/Admiral/Jenn-Air forum with your issue and we will try to help. No cost to you for the support..........D*ick

Mar 03, 2011 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

If you get the FL how do you get the door to open??


  1. Your Maytag Neptune washing machine displays error codes, also called "help codes," to identify specific problems with your washer. Once you close your Maytag Neptune's door, the machine locks the door, goes through the selected wash cycles and unlocks the door when the laundry is finished. Error codes appear when there are problems with the door, the inflow and drainage of water and the motor.
  2. Do
  3. Your Maytag Neptune washer displays the "do" help code when the washing machine is trying to start a cycle, but the door is open or not locked properly. If this message is displayed, close the door securely and restart the washing cycle.
  4. FL
  5. The "FL" code indicates that the washing machine was unable to lock the door after you closed it. Open and close the door tightly, then restart the washing cycle.
  6. Sd
  7. The "Sd" code indicates that you have added too much detergent to the washing machine and your laundry has too many suds. The machine will stop displaying this code if it has successfully run the suds recovery cycle, which removes the excess suds from the wash load. If the code remains, reduce the amount of detergent in the load. Use less detergent for similar loads of laundry in the future.
  8. PF
  9. The "PF" code indicates that a power failure has occurred. Restart the wash cycle. If the code still appears, check that the washing machine is still plugged in to the electrical outlet.
  10. Nd
  11. The "nd" code indicates that your Maytag Neptune is not draining as it should. Check that the drain hose isn't kinked and that the stand pipe isn't clogged. If you find either of these problems, fix them before restarting the washing cycle.
  12. LO
  13. The "LO" code appears when the washing machine has finished the selected wash cycle, but cannot unlock the door. Verify that the door is closed properly, push the "Off" button, and wait two minutes. The door should unlock and the error code will disappear. If the error code remains, unplug the washing machine, wait two minutes and plug it back into the electrical outlet.
  14. Lr
  15. The "Lr" code indicates that the washing machine's motor is not running as it should. Have your Maytag Neptune washing machine serviced by a certified Maytag repair professional.

Dec 06, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Cycle stops 3E code appears


Hi,
Well the error code 3E means that the overcurrent is detected at the moter.
Please check it if you have some overcurrent problem!
Thanks!
mannu_rakesh

Sep 01, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

My maytag neptune Model #: MAH5500BWW is flashing


The error code you describe is not listed in Maytag's book of codes. The link below will take you to Maytag's website error code page where you might be able to match it up.
http://maytag.custhelp.com/app/answers/detail/a_id/2885/session/L3NpZC8yY3lEMjNEag==/sno/0

Jul 15, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag neptune front load


sounds like possible blocked internal filter or partial pump blockage

Dec 07, 2007 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Maytag MAH6700AWW Neptune Front-Load Washer Logo

813 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...