(800) 836-9287
Celebrating 14 Years Of Outstanding Printer Repair...
Answer
the mitsumi stepping motor M42 SP-4N in my Snapscan e50 has broke down; is it possible to get a new...
(More)
Problem for Agfa SnapScan E50 Flatbed Scanner
Agfa Snapscan e50 problem
By pandamama - usenet poster
I have just installed an Agfa Snapscan e50 on my system:
Intel Pentium III 450 Mhz
128 MB RAM
Windows ME
I have problems with the Scanwise software supplied.
Problem is that when the scan preview runs, the image at first comes in
correctly with colours as in the original.
As soon as the selection box kicks in, all colours within the box get
scrambled - blues become greens, browns change to bright reds etc. The
altered colours carry over into the final scanned image.
If I scan with the latest version of Vuescan I get near perfect scans, so
presumably the problem is somewhere in Scanwise. I can't see any
installation tweak that can be causing this behaviour.
Can anyone cast any light on this problem, please?
Rodger Sparks
Intel Pentium III 450 Mhz
128 MB RAM
Windows ME
I have problems with the Scanwise software supplied.
Problem is that when the scan preview runs, the image at first comes in
correctly with colours as in the original.
As soon as the selection box kicks in, all colours within the box get
scrambled - blues become greens, browns change to bright reds etc. The
altered colours carry over into the final scanned image.
If I scan with the latest version of Vuescan I get near perfect scans, so
presumably the problem is somewhere in Scanwise. I can't see any
installation tweak that can be causing this behaviour.
Can anyone cast any light on this problem, please?
Rodger Sparks
Solution #1
posted on Aug 10, 2005
Beresford - usenet poster
Rank: Apprentice
Rating: 0%, 0 votes
Rating: 0%, 0 votes
Any chance you selected slide instead of negative, or vise versa?
Larry
In article <wIc36.109$H21.9 @ozemail.com.au>,
"Rodger Sparks" <rspa @voyager.co.nz> wrote:
--
-------------------------------------------------------------------
SABO Monitor Repairs Phone:(613) 592-8485 s @igs.net
Ottawa, Canada Cellular:(613) 265-0012 www.igs.net/~sabo
Sent via Deja.com
http://www.deja.com/
Larry
In article <wIc36.109$H21.9 @ozemail.com.au>,
"Rodger Sparks" <rspa @voyager.co.nz> wrote:
--
-------------------------------------------------------------------
SABO Monitor Repairs Phone:(613) 592-8485 s @igs.net
Ottawa, Canada Cellular:(613) 265-0012 www.igs.net/~sabo
Sent via Deja.com
http://www.deja.com/
Yes
No
Solution #2
posted on Aug 10, 2005
M0nica L - usenet poster
Rank: Apprentice
Rating: 0%, 0 votes
Rating: 0%, 0 votes
Thanks for the reply
No, I have tried that.
Well, since you provided Vuescan you would say that, wouldn't you? :-)
Seriously, you did a darn sight better job than the cretin who wrote
Scanwise for the Agfa scanners.
Rodger Sparks
No, I have tried that.
Well, since you provided Vuescan you would say that, wouldn't you? :-)
Seriously, you did a darn sight better job than the cretin who wrote
Scanwise for the Agfa scanners.
Rodger Sparks
Yes
No
Popular Solutions for Agfa SnapScan E50 Flatbed
Questions and Unsolved Problems for Agfa SnapScan E50 Flatbed
Do you recommend Agfa SnapScan E50 Flatbed Scanner?
Answer
Answer
how do i unlock me snapscan e50 scanner?
Answer
The OCR component is not working
Answer
Describe your agfa avantra 25 Vertical lines on developed film The spinner motor has been acting up...
(More)
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For Agfa SnapScan E50 Flatbed...:
Top Scanner Experts
Experience:
30 Years of professional repair and design.
Ask Me
Top Printer Repair
Best Scanners
Recommended by Owners
Recommended by Owners
