Question about Maytag Dishwashers

1 Answer

Maytag Dishwasher will not start. all lights will flash except for the start / cancel button.

Posted by on

  • Anonymous Mar 16, 2014

    The controls have been malfunctions. Start and cancel will flash at the same time. Delayed will light up and then stop being lit. Washer won't start

×

1 Answer

I had the same problem. The plastic wiring strip that connects the touchpad had corrosion from water. The panel would need to be replaced, because they don't sell the touchpad separately. (around $50 - $70 USD)

Posted on Jun 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Dishwasher starts on its own (no house is not haunted). Start resume button flashes


have a service technician in as it appears to be a problem in the program board
could be moisture across the circuit board

Feb 06, 2016 | Maytag MDB7749AWQ Builtin Dishwasher

1 Answer

Green start button won't stop blinking


START/RESET status indicator light flashing


You have pressed the indicator light flashing START/RESET pad while the START/RESET dishwasher is running. This will cancel the cycle. The light will stop flashing after the dishwasher drains (about 90 seconds).


Press the pad once to start the dishwasher. Press the pad a second time when the dishwasher is running only if you wish to cancel the cycle.


Power to the dishwasher was turned off while a cycle was running and power has just been restored to the dishwasher. The blinking lights indicate that the dishwasher is draining the potential water inside.


The light will stop flashing after the dishwasher drains. A new cycle will start automatically.


Good luck

Nov 29, 2010 | General Electric GLD6966RSS Stainless...

2 Answers

My maytag 200 quiet series dishwasher has a button with the number 3 next to the start/cancel button and will not start. The 3 flashes but won't start? Any idea what that means?


The control panel has bee locked. Press and hold the heated dry button for 3 seconds until the light next to the lock "3" button goes off. This feature is to prevent small children from starting it. Locking the controls works the same way, hold the heated dry button for 3 seconds will turn it back on.

Dec 13, 2009 | Maytag 24 in. MDB5651A Built-in Dishwasher

1 Answer

Kitchen Aid dishwasher will not start


Can not start KitchenAid dishwasher..."child lock" light keeps coming on. Help!

Aug 24, 2009 | KitchenAid Dishwashers

2 Answers

Indesit DI 620 dishwasher lights 2 and 4 flashing


Lights 2 and 4 flashing - can't start machine. This fault not covered in manual.

Apr 21, 2009 | Maytag MDB5100A Dishwasher

2 Answers

Maytag Quiet Series 300 Legacy Series Dishwasher


Mine was doing the same thing and I just pressed and held down the heated dry button until the light went off. Then I was able to start my machine as usual. Hope this works for you.

Mar 12, 2009 | Dishwashers

2 Answers

Maytag dishwasher, no power, then flashing lights, now no power.


Had the same problem, removed the kick panel to find a set of instructions under the insulation, had to push a sequence of the panel buttons, its been running great for a couple of weeks now!
Jeff

Dec 23, 2008 | Maytag MDB7100AWB Dishwasher

5 Answers

Kenmore dishwasher Lock On light flashing


holding the button for four seconds will not do it, you have to hold it until the light stops blinking and
will go back to normal, normall takes more than four seconds to unlock the unit, this is something
the sears repair techs know becouse the are trained on all this things but, they will not share this things, becouse thats how they make money

Dec 29, 2007 | Dishwashers

4 Answers

Maytag Dishwasher


we have a model mdvtt53aww1 and you can push three buttons and will light up the hi temp wash, heated dry and sanitize is there a code make it start

Oct 01, 2007 | Dishwashers

3 Answers

All the lights are flashing on Maytag Quiet Series 300


Try pressing heated wash, heated dry, then heated wash, heated dry. It should reset it. Also try pressing and holding the cancel button for 5 seconds to see if that works if the other doesnt.

Sep 23, 2007 | Maytag 24 in. MDB5651A Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...