Question about GE Security Simon 3 Wireless Home Security System

3 Answers

90 sec count down

Is there a way that when I am home and setting the alarm for the night that I can set the alarm without the 90 sec beeping countdown?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

To arm the GE Simon 3 without the entry delay, press "Doors/Windows" button twice. The panel should say "Doors and windows on. No entry delay."
To turn off the beeps for the exit delay, enter your master code while the system is disarmed, open panel cover by pushing down on the button on the very top of the panel. Then use the buttons with red numbers under them to enter your master code. Then press "Delete" "Option" "Done" "Done" then close the keypad cover. The panel will no longer make the beeping sounds.

Posted on Aug 26, 2012

You could also press either motion or doors and then price chime.

Posted on May 13, 2008

You Can Turn off the panel beep under the cover that is what i did.

Posted on Apr 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

To turn the beep sound off when system is set to armed


Troubleshooting FAQs - Solve Problems Quickly by ...

www.adt.com/help/faq/troubleshooting

The ADT CorporationHow do I silence low battery beeping? ... Why is my ADT Pulse security systemreceiving an unavailable message? ... How do I fix a disconnected camera? ... by a motion detector while the system is armed, the burglary alarm will sound. ... Some common events that may cause a motion detector to set off a false alarm ...

Five Steps: How to Stop a Beeping Security System

https://www.vectorsecurity.com/.../Five-Steps-How-to-Sto...

Vector SecurityFeb 9, 2015 - The shrilling sound of a continuously beeping security system is enough to drive anyone crazy. A power outage, faulty wiring or bad batteries ...

The Top 15 Questions about ADT Home Security Systems ...

zionssecurity.com/...security/the-top-15-questions-about-adt-home-securi...
Oct 10, 2012 - How do I turn off the voice descriptions but keep the chime sound on?... If your time on the Lynx system is not set all you need to do is push your user code + # + 63. ..... When our security alarm is not armed it beeps every few seconds ....Reasons to Install Security Cameras in your Home · Small Business ...

Jan 03, 2016 | Surveillance Cameras

1 Answer

My alarm beeps at night for a short period


if it is about a smoke alarm with a battery in it, when the alarm beeps for no apparent reason, it is a bult in indicator that the battery is flat or approaching a low voltage and needs replacing
If it still beeps after replacing the battery have it checked out as a fire alarm is critical for your safety

Jun 12, 2015 | Kidde 1276-9995 Hardwire Smoke Alarm with...

1 Answer

Can the Simon xt be programed so that when you enter the stay mode there is not exit delay beeps?


There is always the exit delay, however, you can arm it silently and with no entry delay. To arm silently, press Door and windows, press silent.
To arm without entry delay, press doors and windows twice. Press silent if also wanting no beeps.

Nov 04, 2012 | GE Security Simon 3 Wireless Home Security...

1 Answer

I have model kn-cob-lcb-ca...it does not have a digital display, it was made in 2009..a few nights ago it started beeping...4 beeps, 5 second pause then 4 beeps continuously..the manual says this is a...


send the detector back and have it replaced,
The CO sensor will not alarm to levels of CO below 30 ppm and will alarm in the following time range when exposed to the corresponding levels of CO: 70 ppm CO Concentration 60 - 240 minutes 150 ppm CO Concentration 10 - 50 minutes 400 ppm CO Concentration 4 - 15 minutes The alarm shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. When the unit detects carbon monoxide, the alarm pattern will be four (4) short beeps - followed by five (5) seconds of silence - followed by four (4) short beeps. The unit shall incorporate 2 LED's. A green LED will be illuminated to indicate the alarm is operating properly when plugged into an outlet, and will flash every 10 seconds when on backup battery power. A red LED will flash to indicate that carbon monoxide has been detected until the device is reset or CO is eliminated or will flash to indicate low battery or alarm malfunction. The unit shall at a minimum meet the requirements of CAN/CSA 6.19-01. It shall also include a 10-year manufacturer's limited warranty or

Test/Reset Button - Tests the unit for proper operation. Resets the carbon monoxide alarm.
• Tamper Resist Feature - If activated, unit goes into constant alarm mode if it has been unplugged or has come loose from the outlet.

Sep 20, 2011 | Kidde Nighthawk Combo Gas/co Detector

1 Answer

I have the Caddx NX-6 alarm system. Problem: Alarm system will not arm when entering the 4 digit code. Symptom: I have all doors/windows/zones closed. LED displays READY. I press the code and get 3...


If the power was out for 5 hours and the control panel still shows 'low battery', it's probably time to replace the battery for the control panel. However, this shouldn't keep the alarm panel from arming up. I would first try to re-start the control panel by removing the power and battery connection for a few seconds and plugging it back in. After that, it would be a good idea to re-enroll all of your attached sensors, etc. by entering into programming mode and exiting. Press * 8 + {go code} then just press exit. The default 'go' code is 9713. After about 15 seconds, the panel will have auto-enrolled each attached device. Try arming and disarming the panel. Be careful of setting off the alarm, as your monitoring station may dispatch police, etc. in the event of alarm. This is why having a certified alarm installer do this work is a good idea, as they can put your account with the monitoring station on 'test' so alarm signals are recorded for testing purposes but are not acted upon.

Feb 11, 2011 | GE / Caddx NX 6 Fastpack with NX 1308E LED...

1 Answer

Kidde nighthawk carbon monoxide detector started beeping every 30 sec.pressed reset button on front beeping continued louder, put unit ouside in fresh air for few secs beeping stopped. I opened the...


Golding93, you could very well have elevated levels of CO in your home. You should leave your house immediately and call the fire department. However, if your CO alarm is 7 years old, it could also be the alarm's end-of-life warning. Regardless, you should definitely call the fire department to have everything checked out. If you need additional assistance with your CO alarm, please call our customer service line at 1-800-880-6788. Thanks for being a Kidde customer. We appreciate your business!

Crystal Robinson
PR Coordinator
Kidde

Dec 20, 2010 | Kidde Nighthawk Combo Gas/co Detector

2 Answers

Alarm beeps every 5 mins. I have changed battery and problem still persists.


Tell me what brand your alarm is and I can help you with the beeping. Usually if you hit # it will silence the beeping for 24 hours. Something you can try is finding your main control box. Its usually located in the garage or in a closet. It is tan and 6 x6. First disconnect the battery inside the control box by jiggling off the black/red leeds. Then unplug the power supply. Wait five minutes. Reconnect the battery and plug in the control box. This is completely powering your system down and then repowering it up-essentially "re booting." If this does not correct the issue, give me the brand and I can further help you.

Nov 22, 2010 | Industrial Home Security Burglar Alarm...

1 Answer

Need to make entry time longer . I am able to delete option 10 but can't add option 10. Entry is only 5 sec.


Here is instructions from Installation Manual. I am also attaching links to full Installation as well as User Manuals for your reference at the bottom of page. Make certain to input as 3 digit time - example 45 seconds as 045. Good luck!

Option 10: Entry Delay (Default = 030 sec.)
Determines how much time the user has to disarm the system
after entering the armed premises through a designated delay
door, before an alarm occurs. Beeps sound during the entire
delay time to remind the user to disarm the system.
When turned on, the Entry Delay can be set from 005-254
seconds (030-254 if SIA Limits Option 69 is on). All entries
must be 3 digits. When turned off, the Entry Delay is set to
005 seconds.
Note
For UL listed systems, the entry delay must not exceed 45 seconds.
 To set Entry Delay, press:
1. Add
2. Option #
3. 10
4. Use the numbered keys to enter the 3-digit delay
time.
5. DONE
 To turn off Entry Delay, press:
1. Delete
2. Option #
3. 10
4. DONE

Installation - http://www.homesecuritystore.com/downloadmanual.aspx?mnl_id=334&prod_id=171

Users: http://www.safemart.com/manuals/simon3.pdf

Oct 02, 2010 | GE Security Simon 3 Wireless Home Security...

2 Answers

Hi,


Is the "chime" feature enable for that device?

Jun 16, 2009 | GE Security Simon 3 Wireless Home Security...

2 Answers

Alarm on simon


Mike,
Unfortunately, without a code, there is not much you can do besides disconnecting the system. Do you own or rent? If you rent, call the landlord, he has to fix it immediately, as going off in the middle of the night and disturbing your rest is not acceptable. If you own it, find the main control box, which is most likely in a closet somewhere, and disconnect the 110AC and back-up battery. If you want the system to function, you will most likely need to call a local alarm company. Stay away from the large nationals, service tends to be poor. Find a local company, they depend on the individual customer to stay in business and you will get much better service.
Hope this helps.
Steve

Nov 14, 2008 | GE Security Simon 3 Wireless Home Security...

Not finding what you are looking for?
GE Security Simon 3 Wireless Home Security System Logo

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Surveillance Cameras Experts

Coss

Level 3 Expert

1043 Answers

Brad Brown

Level 3 Expert

13530 Answers

ka4iup
ka4iup

Level 3 Expert

3944 Answers

Are you a GE Surveillance Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...