Question about Hotpoint 23 in. BFI62 Built-in Dishwasher

3 Answers

Hotpoint BF1620 Hi, I appreciate if you can help me with my dishwasher, most of the time after finishing the wash I find washing tablet at the bottem half dissolved and plates and glasses still dirty, I tried diffirent tablets different load but still same? second what is eco wash? Thanks in million

Posted by on

  • Anonymous Jun 07, 2008

    Yes I have a problem on a BFI680 where the detergent flap opens but the tablet is still in it at the end of the cycle.

    Ian

  • Anonymous Dec 14, 2008

    My tablet is often found on the floor half disolved and the dishes dirty after wash. Do I have to put the tablet on the top shelf too or is there another solution to this? Regards Andy

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What you will find is that the plastic nut fixed on the back panel that the top drawer pushes into has lost the rubber inner layer. Replace and your problem is solved

Kamal

Posted on Mar 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Expert
  • 677 Answers

There is a new product out called the dishwasher filtration system. it actually filters the water going into your dishes. the dishes look dirty because your water has a lot of calcium and magnesium in it making them appear cloudy or dirty. the dishwasher filter reduces those minerals and my dishes look perfect now. no more dirty and grimy looking dishes. i also dont waste time washing them by hand before and after the dishwasher. hahaha you can get it at www.dishwasherfilter.com. use code DFMTEN and you will get 10% off. it fits right under your sink and is very affordable. you will be glad you bought this product. thanks

Posted on Apr 27, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i had the same problem and what i did was started putting the tablet on the top shelf, making sure it didnt fall through and never found an undissolved tablet since, but we shouldnt have to do this!

terry

Posted on Apr 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a hotpoint dishwasher BF1620,its leaving a film on everything at the end.


From what you're describing, there might be an issue with the detergent reacting with something in the water. Also, check the water temperature. Any detergent needs to have HOT water--at least 120 degrees or above to activate and clean properly! I also recommend ALWAYS using the high temp wash, boost, or whatever it's called to keep the water very hot throughout the cycle if your washer has that feature.

Sep 11, 2015 | Hotpoint Dishwashers

1 Answer

Hi, The last two washes i've just done on my Hotpoint WD72, the washing has gone full cycle but has come out smelling damp. Any ideas? I've had it since 2005 when it was new.


This will potentially sound odd, but run the 90 degree cycle with 3 dishwasher tablets in the drum. The smell is bacterial and probably the result of a build up of residue from biological soap powder (Which is simply bacteria that eat your stains). Dishwasher tablets are anti-bacterial and will kill the bugs making the smell

Jul 26, 2011 | Hotpoint Ultima WD72 Front Load...

2 Answers

Hotpoint Dishwasher BF1620 blew the main fuse circuit in fuse box during mid cycle wash? Re-set main power fuse circuit but now as soon as Dishwasher switched on immediately blows main kitchen power fuse...


This is happening because you have a very bad fault, a Phase to Earth short, problem. Leave machine UNPLUGGED, Breaker/Fuses OUT. do NOT use it, nor Touch it, It is possible to get severe electric shock. PLEASE get a registered serviceman to inspect this unit.

Feb 07, 2010 | Hotpoint 23 in. BFI62 Built-in Dishwasher

1 Answer

Tablet doesn't desolve properly


Same problem here. Try greasing the tablet 'drawer' flap with olive oil.

If no good just put the tablet on the cutlery rack.

Nov 10, 2009 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

My Hotpoint Aquarius diswasher won't dissolve the washing tablets


I don't have a solution, but the exact same problem is happening with my dishwasher. Nothing is getting cleaned properly.

Did you manage to get the problem fixed?

Jun 01, 2009 | Dishwashers

1 Answer

Door on Hotpoint Diswasher BF1620 won't shut


To better assist you I need the Hotpoint Model n serial # look like this;

HDA3540NSA Hotpoint® Built-In Dishwasher HDA3500NWW Hotpoint® Built-In Dishwasher HDA3500NCC Hotpoint® Built-In Dishwasher HDA3500NBB Hotpoint® Built-In Dishwasher HLD4040NSA Hotpoint® Built-In Dishwasher HLD4000NWW Hotpoint® Built-In Dishwasher HLD4000NBB Hotpoint® Built-In Dishwasher HDA1100NWH Hotpoint® Built-In Dishwasher

Let me know wish one is yours.

Thank you

May 13, 2009 | Hotpoint 23 in. BFI62 Built-in Dishwasher

2 Answers

FDW60


I have exactly the same problem, please let me know if you find a solution and I will do the same.

Sep 21, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Hotpoint bf1620 dishwasher flashing light fault


Hi ,When this happens I keep the button with the letter "P" Pressed until the fault lifgt resets,my row of buttons is inside the top edge of the unit.

Sep 01, 2008 | Hotpoint 23 in. BF50 Built-in Dishwasher

1 Answer

Hotpoint Dishwasher BF1620


ive not worked on hotpoint dishwashers,does the dishwasher drain? at the point it plays up is it supposed to be filling or washing.check the filters inlet valve etc.do you still have the manual for the dishwasher.the flashing lights are most likley a fault code but we dont get hotpoint dishwashers in australia.sorry i cant be of more help.Ian

Mar 21, 2008 | Dishwashers

2 Answers

Hotpoint Aquarius DWF31


to isolate fault,remove bottom front panel,turn off main water,put a tray under machine, remove inlet pipe frompump at front of machine. for a second to see if you have flow that far. If so trouble is in machine. Dig the filter out of th pump entry .It could be blocked

Nov 04, 2007 | Hotpoint 24 in. DWF32P Free-standing...

Not finding what you are looking for?
Hotpoint 23 in. BFI62 Built-in Dishwasher Logo

958 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

AcmeUK

Level 1 Expert

25 Answers

yadayada
yadayada

Level 3 Expert

74418 Answers

Brad Brown

Level 3 Expert

15334 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...