Question about Car Speakers & Subwoofers

1 Answer

I have a rockford fosgate amp p3001 with 2 10" inch sub audiobahn what is the best way to set up the amp

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Put 2 12s pioneers on it 1200 watt each you will see your hole car shaking and the car next to you. i got it in mine and it grabbs a hole bunch of attention and itts cheap. trust me do it.

Posted on Nov 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a boss cx-3500 amplif & and a rockford p2 15 inch sub & not much punch what can i do to have more punch


mess around with the frequency on the amp till you get a good heavy loud sound and turn up the bass more and make sure the speaker cables are in the correct ports if one is in the other the wrong way around it wont give out as good quality or bass

Aug 20, 2012 | Rockford Fosgate Car Speakers & Subwoofers

1 Answer

Can i use a 300 watt amp for 2, 800 watt woofers


yes, but you would not get the same performance as you would if you gave them the suggested power. I have found that it is always better to use a more powerful amp than your subs are rated for (as long as it is clean, high quality, low distortion power). I have had the best luck with name brand amps (kicker,rockford fosgate,phoenix gold,etc...). I hope this will be helpful to you.

Jul 30, 2012 | Phoenix Gold Xenon X10D4 - 10" D4...

1 Answer

I have a 12 inch rockford fosgate subwoofer. It just completely stopped working. cosmetically, there is nothing wrong with it to the ***** eye. My amp works just fine, but the sub doesn't do...


First, switch channels to make sure it's the sub. Check to make sure the tensil leads that go from the + and - posts to the voice coil have not come loose. If that's not the case, the voice coil may have failed.

Aug 31, 2011 | Rockford Fosgate Car Speakers & Subwoofers

1 Answer

I just needed some help with wiring my p8002 rockford amp to 2 fosgate 10 inch subs i just bought. there 4 ohms a piece and dual voice coil. i dont know much about car stereos but people keep telling me...


Well i tried looking up that amp, but Fosgate sight is down. So assuming that the best power out of your amp is 2ohms off the bridged hookup, and the subs are 4 ohms per coil, the best way is to only use one side of each speaker and hook it straight the the bridge. Only using one hook up wont hurt anything, its just for giving you wiring options. And when adding up ohms of speakers, it goes like this. If you had two 4 ohm subs, that'll give you a 2 ohm load. If you hooked up all your hookups, it would be like having four 4 ohm subs, and would give you a 1 ohm load.

judd0081.jpg

Jan 19, 2011 | Car Speakers & Subwoofers

1 Answer

How to wire 2 t1 subs in abox to a 1000 watt 1 channel amp


http://www.rockfordfosgate.com/products/product_details.asp?item_id=91839&locale=en_US

Apr 06, 2010 | Rockford Fosgate Car Speakers & Subwoofers

1 Answer

Rockford Punch HE2 wiring question.


if your sub will handle it, bridging it will give you more power. The best thing to do is to find out how much power the amp puts out ( RMS ) and if it is in your power handling range bridge it. It sounds better and gives you a harder punch because of more power.

Feb 05, 2009 | Rockford Fosgate HE2 RFP4212 Car Subwoofer

1 Answer

RockfordFosgate p2 series


i would get a good pair of RCA's that might help. if not they also make a noise filter that you can add to your RCA's, bad ground could be the problem to.

Aug 13, 2008 | Rockford Fosgate RFP3410 Car Subwoofer

2 Answers

Wiring


You may be surprised to learn that even though there is a negative and positive on the sub it usually dont matter all that much because that amp allows you to switch the polarity of its outputs to allow your mids to sound better... anyways on to your question To wire a sub it depends on how many you have, if they are dual or single voice coils, what impediance your amp is stable at. Tell me what type of amp you are hooking this subwoofer up to and how many are being connected. And ill try and give you the best way to connect the sub(s) to your amp.

Mar 25, 2007 | Rockford Fosgate RFP 2418 Car Subwoofer

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Speakers & Subwoofers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...