Question about Office Equipment & Supplies

2 Answers

Panasonic FP 1780 Copier. The copier has a flashing wrench that will not reset. I need advice on resetting the wrench.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 168 Answers

Hold down 3 buttons in this order:
Paper Tray (Oval button), Recall (Diamond) and #3.
You should see an F2 in the display.
Enter #5 (Display should be showing F5)
Hit the Print Button. (Display should show C00)
Enter 70. (Display should show C70)
Hit the print button. (Display should show probably a 7 or 8)
Hit the print button again. The print button should go Red for a second and then back to green.

Wrench should be gone.

Next to get out of service mode
Hit Clear / stop button until the display shows F5
Then hold down 3 buttons in this order:
Paper Tray, Recall and the Clear Stop button.

You should now be back to working order.

If you have any questions or need parts, feel free to ask.
Have a good day.
Good luck.
Please remember to leave your rating if I have helped you.
Mac

Posted on Apr 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My panasonic fp 1780 copier,is bringing the pages all black do you know wy?help me please,thank you.reina.

Posted on Aug 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Factory reset mf5950dw


To reset , menu - 2 - 8 - menu gets you to the service menu, then do copier - function - clear - all to fully reset the machine.

A kind of soft reset that fix some issues:
Turn off machine, wait 10 seconds then press and hold Clear button while turn on again.

Oct 13, 2013 | Canon ImageCLASS MF5950dw Monochrome Laser...

1 Answer

How can I reset Replace Drum on the Panasonic KX-FL511 Fax?


Hi,

First of you will have to purcahse a Panasonic Drum Unit for you fax.

Inside the drum unit yu will have detailed instructions, you will open up the fax in the front take aout the old and install the new.
Here is a link to a helpful guild
http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Fax-Printers/Laser-Fax/Copier/How-To-Guides/model.KX-FL511.H#ts

Good luck

Nov 05, 2009 | Panasonic KX-FL541 Plain Paper Laser Fax

2 Answers

Error message Oxd0620230, hp 5610 all-in-one, i have tried all the power resets. the cartridge stalls when the code comes up but it don't always stall in the same position. lights flash... also have the...


error message Oxd0620230, hp 5610 all-in-one, i have tried all the power resets. the cartridge stalls when the code comes up but it don't always stall in the same position. lights flash...

May 02, 2009 | Office Equipment & Supplies

1 Answer

I need plain paper fax panasonic kx-fp 200 immediately


The refills that fix the kx-fp135 will also fit your model kx fp 200. Office Depot has this and it can be ordered onlin. : http://www.officedepot.com/a/products/288514/Panasonic-KX-FA136-Black-Imaging-Film/

Apr 16, 2009 | Panasonic KX-FB421 Plain Paper Film Fax

1 Answer

E02-06 error on a panasonic fp-d605 copier


The error E2-06 indicates a problem with paper tray lift in the Large Capacity Cassette (LCC) It could be a faulty lift motor or bad sensor. In this particular case someone crammed way too much paper into the lift tray. I took out half of the paper, restarted the machine and the error cleared.

May 28, 2008 | Panasonic Office Equipment & Supplies

1 Answer

Need to reset prevented maintenance code on Panasonic 7735 copier


okay, you need to press these three keys simultaniously
"user preset, ledger, and the number 3" you will enter the service F mode, then press 7 then the print button, then enter 22 then print then press 000 print, 000 print again and a wrench will lite up which means you just reset the maintenance counter. you then must press user preset and clear/stop key simultaniously to exit.


Thank You,

Mikey

Apr 04, 2008 | Office Equipment & Supplies

1 Answer

Do you know how to explain error code for Panasonic Plain Paper Copier FP-7722 E 7? Our copier locked up...


I believe you have a temperator warm up issue, when does the error ocuur after initially turning on, if it's within 120 seconds or less it's probably a fuse if after it's probably a lamp.

\Thank You,

Mikey

Apr 03, 2008 | Office Equipment & Supplies

2 Answers

Panasonic Copier Error Code


Hello I have a panasonic kx-FT983CX, it can't copy but when copied is not clear.... Please tell me.

Thank you very much!

Mar 04, 2008 | Panasonic Panafax UF-585 Plain Paper Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

667 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98796 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...