- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
While using the camera, you can see the battery logo on the screen.
When the logo is white, the battery is full, after a while 1/3 will be dark. little longer, 2/3 and when the battery is (almost) flat it is complete dark. Then you must stop shooting and recharge the battery.
On the end of the charging cable, the plug that goes into your camera, has an indication light.
As long as the battery iOS charged, the light will be red. When the battery is fully charged, the light will be green. But if it starts flashing, something is wrong with the battery. Or at least the charging went wrong.
When you are using the AC adopter, an orange led can come on on the cable, meaning the battery is discharged.
All to be found in the manual, page 15 and 16
Nice HandmeDown - I checked Amazon for review guide and they had 1854 positive reviews.
The Button next to the black screen is the master button that switches from mode to mode .. like from the screen to the viewfinder (that's above the black screen) with 2 lights.
If this is your first digi camera then it's a big jump.The camera will need a Memory card (unless your nephew from Sydney left that as well) - the batteries will need a charger .
Try this link below (cut & paste) into your search engine and get a manual to read --
Enjoy - it's a good camera -- Ray
hi try to reset ur camera...To do such reset, turn on the camera and hold the menu button down for longer than 5 seconds. A message should hopefully come up on your LCD asking if you want to reset the camera. Select Yes....
IF YOU HAVE INSTALLED THIS SOFTWARE ON A COMPUTER RUNNING XP AND IT WORKED WELL AND YOU FEEL CONFIDENT WITH THE SOFTWARE, I WOULD NOT WORRY ABOUT THIS SCARE TACTIC YOU ARE GETTING ON THIS NEW COMPUTER. IS THIS NEW COMPUTER RUNNING XP,SP2 AND THE OTHER ONE RUNNING JUST XP OR XP,SP1? THIS MIGHT BE WHY YOU ARE GETTING THIS SCARE SCREEN. IF THIS SOFTWARE HAS BEEN WORKING ON A MACHINE WITH XP, IT WILL CONTINUE TO WORK ON XP.THE LOGO TESTING AND VALIDATION PROGRAM WERE MADE TO STOP PIRATE SOFTWARE. IT DOESN'T SOUND LIKE THIS IS THE CASE HERE. SOME OF THIS LOGO TESTING HAD A LOT TO DO WITH GETTING UPDATED SOFTWARE TO WORK WITH NEWER VERSIONS OF XP AND VISTA. LIKE I SAID IF YOU ARE COMFORTABLE WITH YOUR PROGRAM I WOULD NOT FEAR THE WARNING AND INSTALL YOUR PROGRAM AND WHEN YOU DO, JUST CHECK FOR ANY UPDATES TO YOUR SOFTWARE.
You won't believe how easy it is to fix!! I had the similar problem with my camera and found the solution on FixYa.
Hold the camera in your left hand. Turn it on. Using your fingers, tap the SONY LOGO below the screen. At first, the camera might turn off. Turn it back on and tap the logo again, nice and hard with your fingers! The screen will turn on!