Question about HP LaserJet 3050 All-In-One Printer

1 Answer

Win32NT-5.1.2600.0 After loading the system WIN XP i have a pop-up message Win32NT-5.1.2600.0what is that and how to avoid it?

Posted by on

  • vadla Feb 18, 2009

    I have the same problem but on Windows Vista. I get a pop up " Win32NT-6.0.6001.65536"

    Rama

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 202 Answers

Hi Gargamel,

That's your windows operating system version popping up. If you click on START then RUN and type in (w/out the brackets) [winver], that is likely what you'll see.

Are you running Microsoft TweakUI for WindowsXP? There's an option in TweakUI to Enable (or disable) "Show Windows Version on the Desktop".

I don't know how it got enabled on your new XP build. It normally isn't enabled by default. But you can most likely disable it by installing TweakUI and, 1st, selecting the option, and 2nd, deselecting the option to "Show Windows Version on the Desktop".

See HERE.

You can download TweakUI from HERE. Look in the right hand column. Scroll down 'till you see TweakUI.

There's a registry edit for this, too. I'm cautious, though. I don't normally recommend registry editing unless the person is experienced in it. If you are, please, let me know and I'll pass that on to you as well.

Thank you
BJ @:)

Posted on Apr 14, 2008

  • B Joan Rapier
    B Joan Rapier Apr 14, 2008

    ***IMPORTANT NOTE***
    Once you assign ratings to the experts' contributions, the problem will be automatically closed and we'll no longer be able to assist you. So, please, wait until your problem has been resolved before assigning ratings and choosing the "Best Solution". As long as the problem remains open, we will continue to work w/ you until it is resolved.



    When you no longer need our assistance, kindly take a moment to rate the experts' contributions ("solutions") and to choose a "Best Solution". It is customary to assign "FixYa" ratings to the expert(s) whose contributions solved your problem(s) or answered your question(s).



    Thank you again,
    BJ @:)

  • B Joan Rapier
    B Joan Rapier Apr 17, 2008

    Hello Gargamel

    How did it go? Did the information and links I provided you w/ enable
    you to disable the "Show Windows Version On Desktop" feature?



    I DO hope that is the case. :) If it isn't, just post back here and we'll continue to work w/ you.





    If
    it is the case, would you kindly take just a moment to reward my efforts at
    helping you w/ a FIXYA rating for my "solution"? I would be very grateful for your kindness and the show of appreciation.





    Thank you once again for using FixYa! Have a beautiful day.


    BJ @:)

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alps md driver error


Hi,

For the ALPS printers, make sure you are using Windows XP SP2 or older. There are no Win 7 drivers and there can be problems with a Win XP SP3. Join the Yahoo ALPS group. In the files section they have a full description of the problem along with a work around. It usually is a conflict with the bi-directional communication and the LPT port. The LPT port needs to be motherboard based - not an add-on card.

I hope this works.

Nov 14, 2012 | Alps MD 5000 Thermal Printer

1 Answer

Whenever I try to print something I keep getting


It's a possible hardware issue in the feeding mechanism. Try to remove the cartridges from the printer then close the cover. Remove the sheets of paper. Unplug the printer from the power source. Wait at least 30 seconds before plugging back the printer to the power source. When the printer's ready, reload the cartridges. Load some paper but don't overload as this may send wrong information to the printer. Have the paper guides lightly touch the sides of the paper, thus avoiding shifting of paper when it feeds. Let it print an alignment page and do some test prints from computer. If problem persists, I strongly suggest you contact Lexmark Technical Support to further investigate the problem. Thanks.

Jul 25, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Driver required for hp printer 3108


Hi Masifrizvi,

This is hopefully a simple issue to resolve.

Go online:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=447811#N654

Select your operating system and download the driver, often times the cds packaged with the printers only come packaged with a few Operating Systems.
Once downloaded you should be able to install the driver.

Al
Eliteprintersolutions@gmail.com

Jul 15, 2010 | HP Printers & Copiers

1 Answer

Printer does nt work on laptop


Hi,

  • Win 98 software version will never support Win XP system. Please download the software for your XP machine via the below link.
DOWNLOAD FULL FEATURE SOFTWARE

  • Save the download the file to your desktop.
  • Uninstall the older version, restart the computer and install the new version from downloaded file.
Thanks & Regards
Rizwan

Jan 31, 2010 | HP DeskJet 840c InkJet Printer

2 Answers

Computer boots


Hi,

There can be some Win Xp files which has gone corrupt OR It can be a malware/virus.

Try formatting the Windows drive (only) using the Win XP disc.

Thanks

Fame !

May 04, 2009 | HP LaserJet 1320 Printer

1 Answer

Operating system cannot support lex Z2300 series printer...install cannot continue. Win. 98 system.


It simply means that your printer is not compatible with your os in its present form. I'm guessing XP or Vista? Anyway, there should be patches available at your manufacturers website. Look for the drivers/downloads. Also check the xp and vista compatbility lists.

anaanymous

Oct 11, 2008 | Lexmark Z2300 InkJet Printer

1 Answer

Software wont load on computer running Win XP Svc Pack 2


sir,
there is a minimum requirements on all printers depending on how old or new your printer is.,The fact is.. ,matching is required. for example. an older printer use in a latest PC has a very much effects on the performance of the printer it may hang or sometimes doesnt print at all . it is due to the speed of the PC that affect the low memory of the printer

yours,
alecz

Apr 15, 2008 | HP PSC 950 All-In-One InkJet Printer

3 Answers

Win32NT-5.1.2600.0


when i boot my computer i get this pop up message win 32nt-5.1.2600.0.Then when print one page i get another error ......'insert market research disk and click OK'.Am using HP Laserjet P2015.Please help
thanx in advance.

Mar 29, 2008 | HP LaserJet 3050 All-In-One Printer

Not finding what you are looking for?
HP LaserJet 3050 All-In-One Printer Logo

Related Topics:

1,146 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...