Question about Printers & Copiers

1 Answer

I have just purchased an HP photosmart All in one printer and canot connect it to my belkin54g router for wireless printing

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 202 Answers

Hello patken

Have you enabled the wireless radio at the control panel of the AIO (all-in-one)? It isn't enabled by default. It must be turned on at the control device's control panel.

If you haven't done so already, please, do this and let us know the results.

If you have already followed the manufacturer's instructions for enabling your AIO's wireless radio, please, tell us in detail what other steps you've taken so far in attempts to fix this problem.

If you'd like we can locate the instructions for setting up wireless connectivity w/ your AIO. We will need the model number of the device in that case. Just post back w/ that information and we'll be happy to get that for you.

Thank you,
BJ @:)

Posted on Apr 14, 2008

  • 1 more comment 
  • B Joan Rapier
    B Joan Rapier Apr 14, 2008

    correction for paragraph one typo: "...it must be turned on at the AIO's control panel..."

  • B Joan Rapier
    B Joan Rapier Apr 14, 2008

    Please, wait until your problem has been resolved before assigning ratings to the experts' contributions to solving your problem. Once you assign ratings, the problem will be automatically closed and we'll no longer be able to assist you. As long as the problem remains open, we will continue to work w/ you until it is resolved.

    Once you're all set and no longer need our assistance, please, kindly take a moment to rate the experts' contributions. It's customary to assign "FixYa" to the experts' contributions ("solutions") which solved your problem(s) or answered your question(s).

    Thank you again,
    BJ @:)

  • B Joan Rapier
    B Joan Rapier Apr 17, 2008

    Hello patken

    How did it go? Did the information I provided you with lead you to a solution for you AIO's (all-in-one) networking issue?


    I DO hope that is the case. :) If it isn't, please, post back here and we'll continue to work w/ you.

    If it is the case, would you kindly take just a moment to reward my efforts at helping you w/ a FIXYA rating for my "solution"? I would be very grateful for your kindness and the show of appreciation.

    Thank you once again for using FixYa! Have a beautiful day.
    BJ @:)

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connecting Hp wireless printer to my Acer 210 tablet


A wireless printer must connect to the wireless router so you must know the SSID & password of your wireless router.

Initial setup must be done fist by connecting and loading the drivers to the PC. Once done you can print wirelessly because you are printing to a networked TCPIP port.

Apr 12, 2013 | HP Photosmart 5514 Wireless e-All-in-One...

3 Answers

How do I connect my HP 8250 Wirelessly? I have a router and a Linksys wireless-B adapter.


Make sure your router is set to accept Wireless-B connections...most aren't. Log into your router and setup wireless, using an SSID and security. Then connect with your laptop and you're good to go.

Mar 12, 2011 | HP - HP Photosmart 8250 printer

1 Answer

How do I connect my wireless laptop to the hp photosmart 3210?


If the printer doesn't already have network capability, you'll need to use a USB print server. Here's an example. You connect the server to one of the router's wired ports, and then any network computer (wired or wireless) will be able to print to the printer.

Jan 20, 2011 | HP Photosmart 3210 Printer

1 Answer

Iam trying to set up a photosmart D7360 to work in my home for all PCs so I'd like to set it up wireless. I'm currently using a router. How do I start? I have a brand ne HP lap top and the photosmart is in...


HP Photosmart D7360 is Not completely Wireless Capable, However if you want to make it Wireless, You will have to use HP bt450 Bluetooth Wireless.

However since this printer has Ethernet Port, you can still make this printer wireless.

You will have to connect this printer thru Ethernet cable ( network cable ) to Router ( this is called wired networking )

Once you have connected the printer to Router, insert the disk in CD Drive and start the installation process, It will prompt you to choose the type of Connection, Choose Wired/Wireless Network and continue with further installation to complete.

How this works,
With any PC that is connected Wireless to Router, You will be able to print wireless from the PC to Printer.

Jul 03, 2010 | HP Photosmart D7360 All-In-One InkJet...

2 Answers

How to connect wireless HP Photosmart C4780


here is a general steps to connect a printer to a wireless network

http://www.castleink.com/_a-wireless-printer-setup.html


Hope this helps
Thank you

Oct 02, 2009 | HP Printers & Copiers

1 Answer

Need my laptop to communicate wireless to printer


If the printer does not have a built-in network card/print server then there is a couple of ways to do this.
If you have a desktop computer connected to the wireless router with a LAN cable, then connect the printer to the desktop computer and make this printer a shared printer on your network. This means that the desktop computer and printer needs to be on when you want to print from the laptop.
The other way is to purchase a print server, connect the printer to the print server and connect the print server with a LAN cable to the Wireless router.
If you don't have sufficient network ports on the wireless router then you need to purchase a hub. Then connect the hub and wireless router with a LAN cable and then the print server to the hub and other computers to the hub.
Setting up the wireless printing will depend upon which method you want to adopt and I can advise you when further when you are ready.

Aug 02, 2009 | HP Photosmart 3310 Printer

1 Answer

How can I connect my wireless laptop to print wirelessly?


run the wireless setup wizard on the printer from the front panel menus of the printer...this would assign an IP address to the printer from the router...then use the s/w cd that came along with the printer and get the drivers and s/w installed on your computer....if you want a wireless connection it would give you approprite options

Jun 21, 2009 | HP Photosmart C7280 Printer

1 Answer

Wireless printer will not perform without usb cable


It sounds like your printer is not in sync with your wireless router.
Try restarting your computer, then make sure you have Internet access. (Click on Explorer or Firefox, and if you get access, then you know your router is working)
If your router isn't working, unplug the router for 10 or 15 seconds, then plug it back in. Then restart your computer again. That should work.
Once you are sure your router is working, you'll need to make sure your printer is in sync with your router. Best bet is to follow the instructions that came with your printer. You might have to put in the CD that came with the printer and reload the Photosmart programs. At one point during that process, it will ask you what type of router you have, and it will make a connection to the router, allowing you to print stuff without using a USB cable.
(I had to go through this process three times, for three different laptops in my house, and - knock on wood - we've been having great success with wireless printing with our Photosmart printer.)

Jan 18, 2009 | HP Photosmart C3180 All-In-One InkJet...

1 Answer

Hp Photosmart C6180


In order to have a network connection you need to connect your printer to a wireless router that you have. make sure that your computer is already connected to that network.
1. Connect the printer to the router wirelessly. Press the "setup" and then press the arrow key and look for "network". Press ok when you see "network". Press the arrow key and look for wireless setup wizard. After you have successfully connect your printer to the router press ok
2. Check the ip address of the printer by printing wireless configuration page.
3.install the software for the printer
.

Aug 21, 2008 | HP Photosmart C6180 All-In-One InkJet...

2 Answers

How to hook up this printer wireless to my main computer


We cannot connect the pro l7680 printer wirelessly. Connect the printer to the router via ethernet cable and connect the desktop to the router wirelessly.

May 24, 2008 | HP Officejet Pro L7680 All-In-One Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...