Question about Printers & Copiers

1 Answer

Ink absorber full on my canon i550 printer - Printers & Copiers

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Try this website

http://www.polyphoto.com/tutorials/PrintHeadCleaning/CanonCleaningAndReset.html

Let me know if that works

Mitch
P.S. Don't forget to leave feedback

Posted on Apr 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I reset the EEPROM of a canon print head?


Reset Procedures for Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
  1. Turn off Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the printer should turn off, if not, press the Power button once more.
  8. Your Canon i550, i560, i850, i860, i865, i9100, i9950 Printers should respond as normal.

you done.

Aug 14, 2012 | Canon BubbleJet i9950 InkJet Photo Printer

Tip

How To Reset Ink Absorber Canon i550


When your Canon i550 printer get an Ink Absorber Full error, then you need to reset this Canon i550 inkjet printer.
The following step is procedure used to reset waste ink counter of Canon i550. Nevertheless, this procedure is also applicable for the printer models listed below.

PROCEDURE:
I. Enter Service Mode:
  • Plug in power cable
  • Hold down RESUME/CANCEL button
  • Hold down POWER button
  • Release RESUME/CANCEL button
  • Press RESUME/CANCEL twice in a row
Continue reading complete step below:
How To Reset Canon i550

on May 11, 2014 | Printers & Copiers

Tip

Reset Waste Ink Absorber Canon i550


The following procedure is used to reset waste ink counter Canon i550.
PROCEDURE:
I. Enter Service Mode:
  • Plug in power cable
  • Hold down RESUME/CANCEL button
  • Hold down POWER button
  • Release RESUME/CANCEL button
  • Press RESUME/CANCEL twice in a row
II. Execute Waste Ink Counter Reset operation:
  • Press RESUME/CANCEL button 4 times in a row
  • Turn off the printer by pressing POWER button

on Jan 03, 2010 | Printers & Copiers

1 Answer

In printer canon ip 1800 is showing ink absorber is full cant use the printer


Hope you find this information helpful.
The printer has a built-in ink absorber to hold the ink used during Print Head Cleaning, for example. Eight flashes indicates that the ink absorber is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the ink absorber becomes completely full, contact a Canon service representative. (You will need to replace a particular part of the printer. Canon recommends that you call for service as soon as this error occurs. Once the ink absorber becomes completely full, printing cannot be performed until the ink absorber is replaced

Mar 31, 2011 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

How can I do a counter reset in service mode on the canon I550?


Okay, lets try it this way.

There are multiple register types: page count register. Ink Absorber full Register. Ink level register. Data count (byte count register)

What are you trying to change and why?

Don

Jan 13, 2010 | Canon BubbleJet i550 InkJet Printer

1 Answer

When I switch on my i550, The green light comes on , immediately changes to orange which flashes 8 times, reurns to green, flashes orange again. This process repeats ad nauseambut the thing will not print


8 times says the ink absorber is almost full and should print if you press the resume button. If it's too full it won't print until the absorber is changed and the counter reset thru the service mode.

Oct 01, 2009 | Canon BubbleJet i550 InkJet Printer

1 Answer

My i550 printer light comes green then flashes yellow 7 times and repeats this. Why? I receive an operator error message.


7 times means the ink absorber is full. You need a new ink absorber #QA4-1012-000, about $10.00. But you need a shop to reset the error code after changing.

Aug 03, 2009 | Printers & Copiers

2 Answers

Canon i550-turn on-orange/green 8x then long green


From the Canon website:

Issue: Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error)
Solution: Ink Absorber Replacement Options i550

Ink Absorber Replacement Options

This printer has an ink absorber that takes in ink during the printing and print head cleaning processes. The cleaning process is necessary in order to keep the print head nozzles from becoming clogged. Over the life of the printer, the amount of ink that the ink absorber has absorbed is calculated by the printer. Eventually, after substantial use, the printer will enter an error condition when the ink absorber is nearly full. At this point, printing is still possible by pressing the <Resume> button on the printer. To protect the printer from damage, you will not be able to print at all once the ink absorber is full.

Canon recommends having the printer serviced before the absorber becomes full. We are aware that there are many "do-it-yourself" Web sites that offer instructions for making this repair. Replacing the ink absorber is a complicated and potentially messy procedure. Even if the ink absorber is successfully changed, the ink absorber counter must be reset. Be aware that if you attempt this procedure, it is at your own risk.




For the Waste Tank Reset Code, and how to repair or replace the Waste Tank, see this website:
http://www.bioscomputers.ca/CanonWasteTankCodes.htm

Jul 16, 2009 | Canon BubbleJet i550 InkJet Printer

3 Answers

Canon ip1800 ink absorber is full, cannot remove Cartridge


Hi ...

This printer has an ink absorber that takes in ink during the printing and print head cleaning processes. The cleaning process is necessary in order to keep the print head nozzles from becoming clogged. Over the life of the printer, the amount of ink that the ink absorber has absorbed is calculated by the printer. Eventually, after substantial use, the printer will enter an error condition when the ink absorber is nearly full. At this point, printing is still possible by pressing the <Resume> button on the printer. To protect the printer from damage, you will not be able to print at all once the ink absorber is full.
Canon recommends having the printer serviced before the absorber becomes full. We are aware that there are many "do-it-yourself" Web sites that offer instructions for making this repair. Replacing the ink absorber is a complicated and potentially messy procedure. Even if the ink absorber is successfully changed, the ink absorber counter must be reset. Be aware that if you attempt this procedure, it is at your own risk.

Please vote if this helps ... Cheers :)

Jun 03, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

What does ink absorber full mean on Canon Pixma 1700?


my Canon pixma keeps coming up ink absorber full cannot print

Oct 30, 2008 | Canon PIXMA iP1600 Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...