Question about Linksys Wireless-G WRT54G Router

2 Answers

Help with my router

I am trying to access my router by typing www.192.168.1.1 and i can not get in please help

Posted by on

  • alisonclaire May 21, 2008

    i am trying to connect to my router but it is saying the software on my laptop are not compatible with the router but it will pick up someone elses router

  • Anonymous Aug 24, 2008

    wirelses

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 202 Answers

Hi dadou

You almost have it. The correct syntax is...

http://192.168.1.1

Every location on a network, including the Internet and your home computers, has an IP address.

When we type into our browser's address field [http://www.yahoo.com], that "URL" is translated to an actual IP address of [http://209.131.36.158].
You can get to Yahoo! by typing in its "URL" or its IP address. A combination of the two, however, doesn't work.

We use URLs because it is far easier for we humans to remember names rather than numbers. So, there are special computers "out there" (on the "World Wide Web" (www)) that translate the web site URLs we enter into an IP address for us.

When we are accessing devices or other computers on our home networks (LANs), we use IP addresses. In the case of your Linksys router, you would enter [http://192.168.1.1] (w/out the brackets) into your browser's address field in order to reach the router's login window.

If this does not get you to the router login window, then it's LAN-side IP address has been changed. If that is the case, just let us know and we'll help you to determine what it is.

Thank you
BJ @:)

Posted on Apr 14, 2008

  • B Joan Rapier
    B Joan Rapier Apr 14, 2008

    Please, wait until your problem has been resolved before assigning ratings to the experts' contributions to solving your problem. Once you assign ratings, the problem will be automatically closed and we'll no longer be able to assist you. As long as the problem remains open, we will continue to work w/ you until it is resolved.

    Once you you're all set and no longer need our assistance, please, take a moment to rate the experts' contributions. It's customary to assign "FixYa" to those experts whose contributions solved your problem or answered your questions.

    Thank you again,
    BJ @:)

  • B Joan Rapier
    B Joan Rapier Apr 17, 2008

    Hello dadou

    How did it go? Did the information and links I (or the other expert who contributed) provided you with enable you to login to your router's user interface OK?

    I DO hope that is the case. :) If it isn't, please, post back here and we'll continue to work w/ you.

    If it is the case, would you kindly take just a moment to reward our efforts at helping you w/ a FIXYA rating for each correct "solution" or solution that lead you to correcting the issue? We would be very grateful for your kindness and the show of appreciation.

    Thank you once again for using FixYa! Have a beautiful day.
    BJ @:)

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 85 Answers

You need to type
http://192.168.1.1 not www have fun

Posted on Apr 14, 2008

5 Suggested Answers

  • 556 Answers

SOURCE: i cant access my router(EDIMAX BROADBAND ROUTER)

Warning the following instructions are likely to RESET THE ENTIRE CONFIGURATION OF THE ROUTER and you will need to reenter it completely. Do not follow these instructions unless you are prepared to reconfigure your router completely from the factory defaults. I am not sure but be careful or consult with EDIMAX support before proceeding.


note the following is from the http://www.edimax.us/ website follow technical support and click

BR-6104 / 6104W / 6104P

Then

If I forget my password, what can I do?

I hope this helps.

Posted on Dec 06, 2007

SOURCE: Help please

change private lan in modem or router and then try again. 168 is being automatically assigned by one of those devices

Posted on Dec 09, 2007

  • 258 Answers

SOURCE: I can't access my router through the URL.

try typing the full url
http://192.168.0.1

Posted on Feb 15, 2009

Tom Marvolo
  • 708 Answers

SOURCE: cant get into the settings of my belkin router http 192 168 2 1

Step 1 : Check the IP Address of the Computer

Step 2 : If it is in the Range of the Router ( 192.168.2.x)

Step 3 : Try typing 192.168.2.1 on the address bar of internet explorer

Step 4 : If not working Hard reset the router by inserting a paper clip into the reset hole on the back of the router

Step 5 : If the IP Address is any public address or 169.254.x.x then also do step 4

Posted on Jan 10, 2010

eastpole
  • 22 Answers

SOURCE: set up router/modem as instructed

Problem can't be solved as described, a fixer would need more details.

What kind of modem/router is it?
What instructions are you working from so far (you say, "as instructed" so I take it you're looking at a Quick Start Guide of some sort?)
How are you connected to it?
What http address are you going to (E.g. some routers use 192.168.1.1, others 192.168.1.254 or various alternatives)
What happens when you enter that address on a browser?
Have you set your computer's address to a nearby address so it can talk to the route?

If I had one guess with not enough information, I'd say you need to set your PC to an address one different from the target you're going to.

( http://compnetworking.about.com/od/workingwithipaddresses/g/192-168-1-254-d.htm )

Posted on Jan 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When we connect to the router it says we get connected but their is no internet access. When you connect a computer to the modem their is internet but not when it includes the router. So its obviously the...


click start,and type cmd, open the black box, type ipconfig, check for wireless adapter details, type ping (default gateway nos ) check results and then if you get S4/R4/L0 then type ping (leave a space) WWW.(any website) and check results if you have S4/R4/L0 then it is a problem with browser try a different browser please reply back if you need more help Cheers Techofnet

Aug 05, 2011 | Linksys Wireless-N WRT150N Router

2 Answers

How do I access my router? I type in http://10.0.0.1 and all I get is search results not the router itself. I have been able to do this in the past. Thanks


I understand that you are unable to access the configuration page of the router WGR614. Please perform the below task on your computer connected to the router:

A. Click on Start then go to Programs and go to Accessories and open Command Prompt.
B. In Command Prompt window, type in 'ipconfig' and press 'Enter'. Note down the IP Address, Subnet mask & Default Gateway here.

Please try to access the configuration page of the router using the address that you got in the 'Default Gateway'.

Hope this allows you to resolve the issue. Please revert back for any further clarification.

Regards

Anand

May 14, 2011 | NetGear WGR614 Wireless Router

2 Answers

I dont know how to lock public access from my wireless router. can someone please help


Hi,

Following is some simple steps,which can help you to lock from public access

1. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
2. Access the router, usually by typing 'http://192.168.1.1' or 'http://www.routerlogin.com' in the address bar.
3. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
4. Click on Wireless Settings'(under Setup) from the left menu.
5. SSID:(change into new one)
6.Under security select WPA then type security like your phone number in the passphress box

Hope it can resolved your issue

Thanks for using Fixya

May 07, 2010 | NetGear WNR2000 Wireless Router

1 Answer

I dont know how to access setup wizard for cwr-854 cnet router


To access Router type that --> http://192.168.1.254 into your browsers address bar, a password & logon box should appear, The USERNAME is root The PASSWORD is 1234
Now you should be able to access wizard.
Here is a better manual.http://www.cnetusa.com/eng/Manuals/Wireless/CWR-854/CWR-854%20ver%20F%20Quick%20Install%20Guide.pdf

Feb 09, 2010 | Routers

1 Answer

I cant put a password lock on my netgear wireless router


Hi, follow the below steps to enable security on the wireless router:

1. Open the browser (Internet Explorer, Mozilla Firefox or Safari) on a computer connected to the router.
2. Access the router usually by typing 'http://192.168.1.1' or 'http://www.routerlogin.com' in the address bar.
3. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
4. Click on Wireless Settings'(under Setup) from the left menu.
5. Select security options as 'WEP (Wired Equivalent Privacy)'. Set the 'Authentication Type' as automatic. Set the 'Encryption Strength' as 64-bit.
6. In Key 1 type a 10 digit number. Apply the settings.
I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

Oct 27, 2009 | NetGear WGR614 Wireless Router

3 Answers

How to set up security password in the Netgear router?


Follow the steps to enable security on the wireless router:

1. Open the browser (Internet Explorer, Mozilla Firefox or Safari) on a computer connected to the router.
2. Access the router usually by typing 'http://192.168.1.1' or 'http://www.routerlogin.com' in the address bar.
3. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
4. Click on Wireless Settings'(under Setup) from the left menu.
5. Select security options as 'WEP (Wired Equivalent Privacy)'. Set the 'Authentication Type' as automatic. Set the 'Encryption Strength' as 64-bit.
6. In Key 1 type a 10 digit number. Apply the settings.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

Oct 01, 2009 | NetGear WGR614 Wireless Router

2 Answers

HOW DO I SECURE MY ROUTER


Login to your routers web access by typing 192.168.0.1 in the browser. After that you will find router settings screen. Click on Security tab and change the settings as per your requirment, Choose wep with 128 bit encryption if possibe. Put a strong password. If possinble swith off SSID broadcast as it avoids un necessary attention to your router by hackers.

Aug 24, 2009 | NetGear WGT624 Wireless Router

1 Answer

Trying to connect wpn824 router though dsl with Windows 2000


Hi,

First make sure that you can access internet through the router when connected to it wired. If yes, then please perform the steps below to configure settings:

1. Open the browser(Internet Explorer or Mozilla Firefox) on a computer connected to the router.
2. Access the router, usually with http://192.168.1.1 or http://www.routerlogin.com.
3. Login to the router with the Username as "admin" and Password as "password" (please note that the username and password is case sensitive).
4. Click on Wireless Settings'(under Setup) from the left menu.
5. Select security options as 'WEP (Wired Equivalent Privacy)'.
6. Set the 'Authentication Type' as automatic.
7. Set the 'Encryption Strength' as 64-bit.
8. In Key 1 type a 10 digit number.
9. Apply the settings.
10. Click on Wireless Settings under Advanced in the left hand side menu.
11.. Click on Setup Access List. Uncheck the option Turn Access Control on and click apply.

Scan for the wireless network on the computer with the wireless adapter and connect to your network.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand


Jul 18, 2009 | NetGear RangeMax WPN824 Wireless Router...

1 Answer

I cant access my router(EDIMAX BROADBAND ROUTER)


Warning the following instructions are likely to RESET THE ENTIRE CONFIGURATION OF THE ROUTER and you will need to reenter it completely. Do not follow these instructions unless you are prepared to reconfigure your router completely from the factory defaults. I am not sure but be careful or consult with EDIMAX support before proceeding.


note the following is from the http://www.edimax.us/ website follow technical support and click

BR-6104 / 6104W / 6104P

Then

If I forget my password, what can I do?

I hope this helps.

Dec 02, 2007 | Edimax BR-6104KP Router (BR6104KP)

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...