Recently i bought Nokia IP350. initially i wasnot able to get any output on console. After changing the DB connector, i can see the output on the console. now the issue is i cannot type anything on the CLI. it throws all the output like system bios config, 1 bootmgr, 2 ipso and defalut as 1. it doesnot allow me to choose 2. after that it keeps on showing all the interfaces and its duplex and speed. VPN-1 connected to FW-1. cant assign requested address (send to 62.239.22.70). it even comes up with login mode but soon other output follows. tried rebooting several times but no luck. please help
It sounds like the DB connector still has a few pinouts set up incorrectly. Nokia has exact specs listed for pinouts on their website. I recommend matching that up perfectly. If that doesn't work then the console port could be bad, but that is rare.
i put in my code to run streaming for the ps3 and i get an error message saying that my internet...
(More)
I PUT IN MY CODE TO RUN STREAMING FOR THE PS3 AND I GET AN ERROR MESSAGE SAYING THAT MY INTERNET EXPLORER CANNOT DISPLAY THE WEBPAGE. I THEN DIAGNOSE CONNECTION PROBLEM AND IT SAYS CHECK FIREWALL SETTINGS FOR HTTP port(80),HTTPS port(443), AND FTP port(21). help
Firewall/ Router Limiting Network Traffic.you need to open up a port so other can connect to you ...
(More)
Firewall/ Router Limiting Network Traffic.you need to open up a port so other can connect to you what it mean, how to over come tis problem
I just got this IP350 from eBay. When I powered it up, I did not get anything on the cosnole. How do...
(More)
I just got this IP350 from eBay. When I powered it up, I did not get anything on the cosnole. How do I go about tracking down the problem? Thanks.