Question about Casio Wave Ceptor WV57HA-1AV Wrist Watch

4 Answers

Casio Wave Ceptor WVA-104H

This is an analog & digital watch. Digital part of watch works great but the analog part is 2 min. slow and will not set. I have changed time zones to force reset always stays 2 min. slow.

Posted by on

  • 3 more comments 
  • aqib Apr 21, 2008

    my watch shows 5 min time difference in digital and analog

  • Fixya104 May 12, 2008

    Answer should read: 1) Press ADJ button six times. You must see HS on the display. 2) Press ADJ button until current digital time starts to flash. 3) Using the LIGHT button (-) or the RECEIVE button (+) you can adjust the analog time in 20 second intervals.

  • Fixya104 May 12, 2008

    Answer should read: 1) Press MODE button six times. You must see HS on the display. 2) Press ADJ button until current digital time starts to flash. 3) Using the LIGHT button (-) or the RECEIVE button (+) you can adjust the analog time in 20 second intervals.



    CORRECTING ERROR IN STEP 1

  • Anonymous Nov 15, 2008

    impostazione lancette

  • Anonymous Mar 14, 2014

    how to sycronize 2nd time zone analog and digital on tag h cl1110

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Casio Master
  • 13,433 Answers

Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

http://world.casio.com/wat/download/en/manual/

You will need a pdf reader on your pc, you will find all instructions in there.

If you don't have a pdf reader you can get one from
http://www.foxitsoftware.com/pdf/rd_intro.php

Posted on Jun 10, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Set the time ahead of the actual time then put it near a strong magnet to stop the analog mechanism and take it away when you get to the time you want.

This is the craziest thing, never have another one.

Posted on Jul 02, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Works, thanks

Posted on May 09, 2008

See the manual.

press de ADJ Mode button six times. You must see HS on the display. Press ADJ button. With LIGHT and STAR/STOP buttons you can adjust the analogic hour.

Posted on Apr 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Citizen Skyhawk analog UTC hour hand is alway 1 hour ahead of the UTC digital hour. I've tried reset and the hour/min hand alignment process without success. Any ideas other than sending in the watch...


You've gotta go to the set setting, one click out on the knob and cycle through all the timezones using the B button (the lower one) to change all the settings to OF (for winter) or ON (for summer time). According to their website FAQ, they can't determine when daylight savings time goes into effect for all the different time zones so there is no automatic changeover from SMT to normal and back again. Disappointing, I know. I just spent half an hour going through their website looking for some master switchover as well.

Mar 27, 2011 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

1 Answer

How to set analog time on Citizen JN0040-58L watch?


while crown is all the way down in the normal position , turn the crown till the mode face (the bottom circle ) goes to TME.

press the A or B button (top button A , bottom B ) to select what city where your time zone is to change . Example you are in eastern standard then you would select NYC.

Now pull crown out to second click. with normal crown position is 0 this position would be 2 .

Use the A button to find proper city again to adjust time with . the city name should start flashing .

Now just use turn the crown to change digital time. When you change the digital time the analog time is also corrected.

Push crown back to 0 position .
and you are all set

Oct 19, 2010 | Citizen JN0040-58L Wrist Watch for Men

1 Answer

How to set tje analog time in Citizen JN0040-58L watch?


while crown is all the way down in the normal position , turn the crown till the mode face (the bottom circle ) goes to TME.

press the A or B button (top button A , bottom B ) to select what city where your time zone is to change . Example you are in eastern standard then you would select NYC.

Now pull crown out to second click. with normal crown position is 0 this position would be 2 .

Use the A button to find proper city again to adjust time with . the city name should start flashing .

Now just use turn the crown to change digital time. When you change the digital time the analog time is also corrected.

Push crown back to 0 position .
and you are all set

Oct 19, 2010 | Citizen JN0040-58L Wrist Watch for Men

1 Answer

I have a men's Citizen Eco-Drive WR 200. Why does my digital time accuracy differ by 2 mins from the analog setting? Thank you, Wayne


The analogue time can be set to agree with the digital time by following their instruction manual.

If you go to http://www.citizenwatch.com/COA/English/settings.asp and follow the instructions, you can download the ones for your watch.

Sep 28, 2010 | Citizen Eco Drive Chronograph Perpetual...

1 Answer

Setting time day date in ESQ Aerodyne


1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date
2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Jul 26, 2010 | ESQ 07301132 Aerodyne watch

1 Answer

Cannot get the digital settings and the analog hands to match.


mcdevito75 here, Most likely the digital part of your watch is for thetime in your time zone while the analog (hands) time is for a different time zone, (Lodon / New York) visit a small watch repair shop in your area for details.

Jun 26, 2010 | Watches

1 Answer

Can't adjust the date on a digital watch


These are the instructions for the AD0721. They might apply to your model, too. I hope this helps:

http://img261.imageshack.us/img261/6784/manualr.jpg

The analog setting of the watch takes place by pulling out the knob (kind of tough) and adjusting, like a regular analog watch. The analog and digital displays are will NOT stay in sync, unfortunately.

Good luck.

PC

May 26, 2009 | Watches

1 Answer

Analog will not sync with digital


I just bought a 4756. Hard to follow that manual.

In the end I used these parts of the manual
Step 1 was to set the correct time zone (off PT or pacific time to ET eastern Time.)
Step 2 was to do a manual receive of the radio time.
Step 3 was to Home all the analog hands so they all pointed to 12. see manual
Step 4 then I hit B button - top right by the 2 and everything spun around to the right time received from the manual received time.

Dec 21, 2007 | Casio Wave Ceptor WV57HA-1AV Wrist Watch

7 Answers

Daylight Saving Time will not set correctly


Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

http://world.casio.com/wat/download/en/manual/

You will need a pdf reader on your pc, you will find all instructions in there.

If you don't have a pdf reader you can get one from
http://www.foxitsoftware.com/pdf/rd_intro.php

Nov 08, 2007 | Casio Wave Ceptor WV57HA-1AV Wrist Watch

1 Answer

Analog clock not in sync with digital clock


This problem may be due to your analog hands being improperly zeroed. To find out, try this: 1. Put the watch in chronograph mode by rotating the crowon in its normal position to "chr" 2. Pull out the crown two clicks. This should cause all of the hands to point to zero. If you do this and your minute hand points to 1 o'clock, or five minutes, you will know that this is the problem. If this is the problem, you can can correct it by zeroing the hands as follows: 1. Put the watch in chronograph mode by rotating the crowon in its normal position to "chr" 2. Pull out the crown two clicks. This should cause all of the hands to point to zero, or close to it. You should also notice the letters "HR" in the lefthand digital display. This allows you to move the hour hand by rotating the crown. If the hour hand is not pointing at 12 o'clock, rotate it so that it does. 3. Push the top button once. The letters "MIN" should appear in the lefthand digital display. This allows you to move the minute hand on the large dial, and the minute and hour hands on the small UTC dial. Rotate the crown so that the minute hand points directly to 12 o'clock. 4. Push the top button again. The letters "SEC" should appear in the lefthand digital display. Rotate the crown to point the second hand directly at 12 o'clock. 5. Push the crown back into its normal position. Set the digiatl time and date in your tie zone, and your analog hands should match the digital read-out. If the zeroing of the hands is not the problem, I don't know what is wrong with the watch.

Jan 22, 2007 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

Not finding what you are looking for?
Casio Wave Ceptor WV57HA-1AV Wrist Watch Logo

7,928 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Jimmy Accardi

Level 2 Expert

97 Answers

k24674

Level 3 Expert

7987 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...