Question about Kenwood KRF-V5060D Receiver

2 Answers

SCREEN LIGHT COMES AND GOES AS IT PLEASES...

Hi there, i have a Kenwood KRFV506OD reciever and it has had this problem for a little while now, but i am getting annoyed with it.
Firsty it would only turn off for an hour or two then come back on, but now it spends most of the time off, everything still works like normal, it's just a pain not knowing what setting it is on etc..
I have seeked help from some repairers but they aren't to interested in helping, i was hoping to maybe repair it myself with the help of some service information, eg. wiring diagram, technical data etc.
Any help will be much appreciated.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Hi,you can get a service manual(or at least a circuit) from here

Posted on Apr 14, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

First a couple of questions:
1) Does the panel seem to behave this way more after the set warms up or is it just random?
2) Is anything else effected or are you just loosing the front panel display?

Thanks,
Dan

Posted on Apr 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tk 2200 ptt button not working. when the button is pushed, the light come on momentarily then goes off


Hi Benjamin,

Kenwood TK-2200. The light comes on when you press PTT button, indicates you are transmitting.

The light goes out when you release the PTT button, if itgoes out during transmission, but your message gets through to your contact, then I don't see the problem.

If the light goes out during a transmission and you are still able to communicate, Don't worry, be happy, it's just a minor glitch with the light, no the radio.

As you haven't given me the details that I have guessed for you, I hope I have been helpful.

Cheers,
Peter

Nov 01, 2011 | Kenwood TK2100-TK2200-TK3100-TK3200-TK3101...

2 Answers

Model: PGX2L5644-662MHz. Its causing a loud sound as if its lost or is loosing frequency even if I am standing with the mic close to the reciever. The ready light comes on and also the signal light when I...


Reset the channel/group on both the mike and the reciever. Shure reuses frequencies by groups so if the group is different, but the channel is the same then you aren't on the same actual frequency.

There should be an auto-set option on the recievers display as well as the mike. Turn them both on, and then just hold the mike up to the reciever so that the little IR window can see the reciever and the 2 with sync together.

If they are both on the same group and channel then turn the mike off, and adjust the squelch control until static is heard, then turn it back until it just goes away.

Feb 28, 2011 | Shure LX2 / Beta58 Microphone

1 Answer

Kenwood rx29 reciever protection fault


Check the speaker ohms. If you still have the factory ones they are rated at 2ohms. All new stereos need a 4 ohm speaker. I had the same problem with a different kenwood and all I did was change to a set of kenwood speakers and that fixed the problem

Feb 27, 2010 | Audio Players & Recorders

1 Answer

No sound


What brand of reciever are you using. Most pioneers have a floating signal ground and the shield of the input at the amp needs to be connected to chassi ground. Also if you had a previous amp failure and the power ground in your old amp opened the current to power the amp will flow through the signal ground of the reciever and burn the copper trace on the circuit board in the reciever. test this by connecting signal cable shield to car reciever chassi.

Aug 29, 2009 | Kenwood KAC-8401 Car Audio Amplifier

1 Answer

The diesel coil light on my dash board comes and goes off as it pleases. Please help


look under the bonnet, follow the cable from one end of your glow plugs, it will go to a timer relay for the glow plugs, sounds like the relay has gone faulty needs replacing. hope this helps

Apr 14, 2009 | 2003 Renault 181

1 Answer

Samsung U600 no screen display or frozen.


i would send it inot the company for a repair if you try it youself you will void any kind of warenty my guess is one of the files was bad. If you ever need anymore help with electronics questions pleases dont hesitate to ask me at dragon_rage27@att.blackberry.net
thanks and good luck

Jan 08, 2009 | Samsung SGH-U600 Cellular Phone

2 Answers

Dolby Digital Has Stopped Working


i sthe thx dobly digtal button on off or on auto ?

Nov 14, 2007 | Kenwood VR-505 Receiver

2 Answers

Kenwood Reciever VR-615 S/n: 20102759


I HAVE SAME PROBLEM,I HIT RECEIVER ON RIGHT SIDE & DISPLAY LIGHT COMES ON.WHY I DON'T KNOW

Sep 25, 2006 | Kenwood VR615 Receiver

Not finding what you are looking for?
Kenwood KRF-V5060D Receiver Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4853 Answers

Eddie Dalton
Eddie Dalton

Level 1 Expert

41 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...