Question about PC Desktops

1 Answer

Win 2k Deleted NTLDR. Do not have WIN 2k. CD. Get`ntldr is missing`. Can`t boot. Do have Win XP ( 98 upgrade ) on another M/c Help Ian

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 175 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BOOTING-START/ NTLDR IS MISSING


You must use a recovery console for XP (if it is XP you must contact me or go to recovery option console when you see it on instalation, when you see C:\ , input fixmbr or fixboot and hit enter and restart when completed).
For Win 7 or 8 insert original installation CD a boot from it in DOS, then choose "repair your computer" option and follow procedure...

Jan 20, 2014 | PC Desktops

1 Answer

When uploading windows 7 I get a message: Can't load windows at this time because of a hardware configuration problem or I get missing NTLDR how do i fix this?


First make sure there are no Disks in any of the drives CD , Floppy and Usb
Computer is booting from a non-bootable source. Computer hard disk drive is not properly setup in BIOS.
Corrupt NTLDR and NTDETECT.COM file.

Misconfiguration with the boot.ini file. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32

New hard disk drive being added. Corrupt boot sector / master boot record. Seriously corrupted version of Windows 2000 or Windows XP. Loose or Faulty IDE/EIDE hard disk drive cable Failing to enable USB keyboard support in the BIOS. Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CDROM First verify that no FLOPPY DISKS or CD is in the computer, unless you are attempting to boot from a diskette Test all power and data leads that attach to your hard drive including IDE,SATA if ita flat 40 pin ribbon type it will be the first to fail. The leads from your MOTHERBOARD TO THE HARD DRIVE make sure they have a secure dust free connections and are not faulty Make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections Computers need power and data to travel through every working device and continue its cycle and have an end so any faulty leads will end up with a computer error

also When NTLDR is missing from your operating system it means that there is a problem with your boot loader, a bootstrap process that begins when you turn on the computer. A missing NTLDR means that your computer cannot boot to the operating system. This issue is only a problem on computers running Windows XP or previous operating systems as Windows 7 and Vista don't utilize NTLDR. Fixing the missing NTLDR is relatively easy so long as you have your installation disc.
Locate your Windows XP/2000 installation disc and place it in your CD/DVD ROM drive. If you don't have this disk, then you cannot proceed further. Restart your computer. When the computer restarts press any key on your keyboard when you are prompted, "Press any key to enter setup." Most computers are configured to boot to another device other than a hard drive. Since the Windows XP/2000 installation disk is bootable, you should see the prompt. However, if you don't see the prompt you may need to change your boot priority in your BIOS. To do so, enter the system BIOS by following the onscreen instructions upon startup. Then navigate to the Boot Priority menu and modify another device, such as a CD-ROM to boot prior to the hard drive. Then reboot your computer. After you have pressed any key, the Windows XP/2000 setup screen will appear. After loading, press the "R" key to repair the Windows installation. The screen will appear black. The computer requests which installation you would like to log in. Generally speaking, press "1" and "Enter." If you have more than one hard drive or more than one partition, the procedure may be different. You must know which hard drive or partition your Windows operating system is installed in. You are subsequently prompted for a password. If you haven't set up one up, you can just leave the query blank and press "Enter." The phrase "c:\WINDOWS>" and a blinking cursor subsequently appear. Type "copy d:\i386\ntldr c:\windows" (without quotes), where "D" is the letter of your CD/DVD ROM drive (your optical drive may be different, especially if you have more than one). Eject the CD from the drive and type "Exit" (without quotes) to restart your computer. The NTLDR file will be copied from the installation disc to your hard drive.
or If you've started your Windows XP computer and you see an error message to the effect that the "NTLDR" file is missing or corrupted, you've probably also noticed that the computer refuses to boot any further. This is because the NTLDR file is an integral part of the boot process and needs to be restored before the boot process can proceed normally.

Insert your Windows XP disc into your computer. Restart the computer and press any key on your keyboard when the message prompting you to do so appears. Press the "R" key to open the Recovery Console and then press "1" and "Enter" in order to select your operating system. Type in your Administrator password (if needed) and press "Enter." Type "copy d:\i386\ntldr c:\" and press "Enter" and then type "copy d:\i386\ntdetect.com c:\" and press "Enter." Restart your computer and let it boot up normally. Since the NTLDR is freshly restored, the computer boots up properly. b> b>

Mar 02, 2013 | Dell Dimension 3000 PC Desktop

1 Answer

How do fix Hp compaq d530 ''NTDLR missing''



First make sure there are no disks in any of the drives cd floppy and usb Computer is booting from a non-bootable source.


Computer hard disk drive is not properly setup in BIOS.
Corrupt NTLDR and NTDETECT.COM file.


Misconfiguration with the boot.ini file. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32


New hard disk drive being added. Corrupt boot sector / master boot record.

Seriously corrupted version of Windows 2000 or Windows XP.


Loose or Faulty IDE/EIDE hard disk drive cable

Failing to enable USB keyboard support in the BIOS.


Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CDROM First verify that no FLOPPY DISKS or CD is in the computer, unless you are attempting to boot from a diskette


Test all power and data leads that attach to your hard drive including IDE,SATA

if ita flat 40 pin ribbon type it will be the first to fail.


The leads from your MOTHERBOARD TO THE HARD DRIVE make sure they have a

secure dust free connections and are not faulty


Make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections


Computers need power and data to travel through every working device and continue its cycle and have an end so any faulty leads will end up with a computer error


also


When NTLDR is missing from your operating system it means that there is a problem with your boot loader, a bootstrap process that begins when you turn on the computer.


A missing NTLDR means that your computer cannot boot to the operating system.

This issue is only a problem on computers running Windows XP or previous operating systems as Windows 7 and Vista don't utilize NTLDR.


Fixing the missing NTLDR is relatively easy so long as you have your installation disc.


Locate your Windows XP/2000 installation disc and place it in your CD/DVD ROM drive. If you don't have this disk, then you cannot proceed further.


Restart your computer.

When the computer restarts press any key on your keyboard when you are prompted, "Press any key to enter setup."


Most computers are configured to boot to another device other than a hard drive.

Since the Windows XP/2000 installation disk is bootable, you should see the prompt.


However, if you don't see the prompt you may need to change your boot priority in your BIOS. To do so, enter the system BIOS by following the onscreen instructions upon startup.


Then navigate to the Boot Priority menu and modify another device, such as a CD-ROM to boot prior to the hard drive.

Then reboot your computer.


After you have pressed any key, the Windows XP/2000 setup screen will appear.

After loading, press the "R" key to repair the Windows installation.


The screen will appear black.

The computer requests which installation you would like to log in. Generally speaking, press "1" and "Enter."


If you have more than one hard drive or more than one partition, the procedure may be different.

You must know which hard drive or partition your Windows operating system is installed in.


You are subsequently prompted for a password.

If you haven't set up one up, you can just leave the query blank and press "Enter."


The phrase "c:\WINDOWS>" and a blinking cursor subsequently appear.


Type "copy d:\i386\ntldr c:\windows" (without quotes), where "D" is the letter of your CD/DVD ROM drive (your optical drive may be different, especially if you have more than one).


Eject the CD from the drive and type "Exit" (without quotes) to restart your computer.

The NTLDR file will be copied from the installation disc to your hard drive.



or




If you've started your Windows XP computer and you see an error message to the effect that the "NTLDR" file is missing or corrupted, you've probably also noticed that the computer refuses to boot any further.


This is because the NTLDR file is an integral part of the boot process and needs to be restored before the boot process can proceed normally.

Insert your Windows XP disc into your computer.

Restart the computer and press any key on your keyboard when the message prompting you to do so appears.


Press the "R" key to open the Recovery Console and then press "1" and "Enter" in order to select your operating system.

Type in your Administrator password (if needed) and press "Enter."


Type "copy d:\i386\ntldr c:\" and press "Enter" and then type "copy d:\i386\ntdetect.com c:\" and press "Enter."


Restart your computer and let it boot up normally.

Since the NTLDR is freshly restored, the computer boots up properly.


Hope this helps.

Dec 03, 2012 | PC Desktops

1 Answer

How to fix a NTLDR is missing error


Fixes for NTLDR Errors
  1. Restart the PC. The NTLDR error could be a fluke.

  2. Check your floppy and optical (CD/DVD/BD) drives for media and disconnect any external drives. Often times, the "NTLDR is Missing" error will appear if your PC is trying to boot to a non-bootable floppy disk, CD/DVD/BD, or external hard drive or flash drive.

    Note: If you find that this is the cause of your problem and it's happening a lot, you might want to consider changing the boot order in BIOS so the hard drive with Windows installed is listed first.

  3. Check the hard drive and other drive settings in BIOS and ensure they are correct. The BIOS configuration tells the computer how to use a drive so incorrect settings can cause problems, including NTLDR errors.

    Note: There is usually an Auto setting for hard drive and optical drive configurations in BIOS which is usually a safe bet if you're not sure what to do.

  4. Restore the NTLDR and ntdetect.com files from the Windows XP CD. Restoring these two important system files from the original Windows XP CD may do the trick.

  5. Repair or replace the boot.ini file. This will prevent the NTLDR error if the cause of the problem is a boot.ini file that is not configured properly for your Windows XP installation.

  6. Write a new partition boot sector to the Windows XP system partition. If the partition boot sector has become corrupt or isn't properly configured, you may receive the "NTLDR is Missing" error.

  7. Repair the Windows XP master boot record. NTLDR error messages may also appear if the master boot record is corrupt.

  8. Reseat all internal data and power cables. NTLDR error messages could be caused by loose or malfunctioning IDE cables.

    Try replacing the IDE cable cable if you suspect it might be faulty.

  9. Update your motherboard's BIOS. Occasionally, an outdated BIOS version can cause the "NTLDR is Missing" error.

  10. Perform a repair installation of Windows XP. This type of installation should replace any missing or corrupt files. Continue troubleshooting if this does not resolve the issue.

  11. Perform a clean installation of Windows XP. This type of installation will completely remove Windows XP from your PC and install it again from scratch. While this will almost certainly resolve any NTLDR errors, it is a time consuming process due to the fact that all of your data must be backed up and then later restored.

    If you can't gain access to your files to back them up, understand that you will lose them all if you continue with a clean installation of Windows XP.

  12. Replace the hard drive and then perform a new installation of Windows XP. If all else has failed, including the clean installation from the last step, you're most likely facing a hardware issue with your hard drive.

Apr 06, 2012 | HP Pavilion 513n (P9850A#ABA) PC Desktop

1 Answer

Emachines W3619 won't load ntldr


Take a windows XP CD, Switch on your PC and go to "BIOS" menu and select "Boot From CD/DVD" whichever is applicable for your pc.
Now insert the Win Xp disc i drive and start PC, Boot the Pc From CD Drive and you shall get the Blue screen of windows Installation. Restart the PC by hard pressing the power button for 30 secs.
Now you will be able to login to windows.

Dec 02, 2011 | eMachines W3619 PC Desktop

1 Answer

NTLDR is missing




Reference number: CH000465
NTLDR is Missing. Issue:NTLDR is Missing.
Related errors:
Below are the full error messages that may be seen when the computer is booting.
NTLDR is Missing
Press any key to restart
Boot: Couldn't find NTLDR
Please insert another disk
NTLDR is missing
Press Ctrl Alt Del to Restart
Cause:
  1. Computer is booting from a non-bootable source.
  2. Computer hard disk drive is not properly setup in BIOS.
  3. Corrupt NTLDR and/or NTDETECT.COM file.
  4. Misconfiguration with the boot.ini file.
  5. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32.
  6. New hard disk drive being added.
  7. Corrupt boot sector / master boot record.
  8. Seriously corrupted version of Windows 2000 or Windows XP.
  9. Loose or Faulty IDE/EIDE hard disk drive cable.
You can go to these sites to view solutions (to much to post here) Very easy to understand:
http://www.computerhope.com/issues/ch000465.htm

May 22, 2009 | E-Machines eMachines Desktop PC

1 Answer

NTLDR missing


In XP, you can load your XP cd and do a repair:
When you boot with the Win XP install CD-ROM, it loads a minimal operating system, similar to DOS, but compatible with Win XP. At the first screen you select install Win XP (not Recovery Console) and at the next screen it will find that you already have Win XP and offer to attempt a repair. This repair should not touch your applications, it just re-installs the Windows files. This is great because when it works you don't need to reinstall all your software.

In Vista , it is tricky. Let me know.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Nov 02, 2008 | E-Machines eMachines Desktop PC

1 Answer

I get a ntldr error when trying to run Win XP. I have a dual boot with Vista. I've copied the ntldr and ntdetect.com to the root drive where I've loaded win xp (g:). how can I fix this problem so I can...


The advice I got was good. Check the easy bits first. Is one of the cables to your Hard Drive disconnected?Second: Use your Windows Installation disc,and go to Recovery Console, or Repair an Installation. When you reach the command prompt, typethe following two commands, pressing ENTER after each one: copy d:\i386\ntldr c:\ copy d:\i386\ntdetect.com c:\ IF you are prompted to overwrite either of these files, press YES. Take out the Windows CD, type EXIT, and then press ENTER TO RESTART YOUR COMPUTER. If this doesn't work for you, get in touch with me again, and I'll give you some more things to try

Oct 02, 2008 | PC Desktops

3 Answers

My compaq desktop computer wont start up it keeps saying NTLDR missing


you have to repair the operating system or re-install it

Aug 16, 2008 | Compaq PC Desktops

1 Answer

Laptop wont boot up.ntldr is missing.how can i fix it. thanks dave


If the OS you are using is Win XP, try the following procedure.

Insert the Windows XP bootable CD into the computer.
  1. When prompted to press any key to boot from the CD, press any key.
  2. Once in the Windows XP setup menu press the "R" key to repair Windows.
  3. Log into your Windows installation by pressing the "1" key and pressing enter.
  4. You will then be prompted for your administrator password, enter that password.
  5. Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter, which in this case is "e." This letter may be different on your computer.

    copy e:\i386\ntldr c:\
    copy e:\i386\ntdetect.com c:\

  6. Once both of these files have been successfully copied, remove the CD from the computer and reboot.
You should be working ok.

Jul 25, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...