Can I use a SanDisk 2GB Micro SD (in adaptor) in the camera? I get a "Card Error" message, but no more detail of what the error is or what to do about it. The memory card checks out OK in other equipment. Many thx - AtH
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check your mini SD card and see if it has the SDHC (high capacity) logo on it. Originally SD cards, including the mini SD, had a 2GB limit by protocol. The DC10 was introduced when this was the most advanced protocol. Since then the SDHC protocol has been introduced, but the DC10 is not compatible with SDHC. You need to get a mini SD, 2GB maximum capacity.
Is it the SD memory card? or the Micro HDD(4GB) you're pertaining to. In case of micro hdd not detected or error, micro hdd socket(CF) assembly has a problem most likely, need to be replaced. SD card; check your SD card's capacity, it can handle only up to 2GB or try to format your card elsewhere and re insert it again in your camcorder, if it will prompt you "FORMAT SD CARD?" you're lucky
From what I know, and card over 2gb needs a different reader. in this case, I am guessing that the card is an SD card. If you look carefully, you will see HC right below the SD logo. these are High Capacity SD cards, totally, different from traditional SD cards. so what you need to do, is find a 4gb regular SD card (highly doubt one exists) or get a smaller regular SD card (2gb Max I think)