Question about LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

1 Answer

PE Problem My dishwasher begins the cycle then flashes a PE error. I then cannot begin a new cycle or continue with current cycle. Any suggestions?

Posted by on

  • Colly Pops Feb 05, 2009

    I have the same problem. It still keeps flashing with the code "PE" and have no idea what is the problem. When I shaked the machine it went back to normal and washed completely. Then it comes back to square one and so on. Please advise what it means.



    colleen.bradley-thompson@iburst.co.za

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 210 Answers

I don't know of PE as a error for the dishwasher, however stranger things have happened.
Lg has had problems with older units prior to mar 07. They have had wires breaking in the door. If you turn off the power and remove the panel. Look for broken wires and or wires stuck in the insulation. Check for continuity as sometimes it can be an internal break. Fix this and you should be good. Oh put some insulation between before closing it up .

Sgt 48

Posted on Jun 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool adp 9411


If this is the machine with just a knob for the wash cycles, and one button to start the wash cycle, you will have to replace the timer. There is no reset that I know of.

Dec 16, 2013 | Dishwashers

2 Answers

Hotpoint FDW60 flashing eco light


if the eco light is flashing, this indicates that saftey float switch has activated in the base of the dishwasher usually caused by a leak, a polystyrene float activates a microswitch which cuts of the water inlet supply

Mar 28, 2009 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

LG LDF6810 Dishwasher Starts filling with water then pumps water


Because you are not getting an error message, I agree that the controller card is malfunctioning. Almost everthing else would triger an error.
Recommend replacing the controller card.

Feb 19, 2009 | LG LDF6810 Built-in Dishwasher

1 Answer

Dishwasher starts but there is burning before any cycle begins


Hi crandon,
huuum, to your rescue,


You said, dishwasher starts but there is "burning" before any cycle begins
STOP, do not use the dishwasher till you call service!
This is a fire hazard if you continue to run this machine!

I am not there hands on to help you so you must not use it till you get professional help out to diagnose this matter!
Bless You,
huuum

Please leave me with a good rating before you sign off
I

Sep 11, 2008 | Dishwashers

2 Answers

"PE" error message on LG Dishwasher LD-12AS1 LD-12AW2


The PE error code indicates that the machine has a water pressure sensing error. Check and clean the filters on both sides of the inlet water line. Good luck!

Sep 13, 2007 | Dishwashers

Not finding what you are looking for?
LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher Logo

Related Topics:

573 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a LG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...