It was working just fine. i turned it off, then

Hello Emma,

Hope this helps.
When the feed dogs are lowered they will not go up with just the switch. Try this, move the feed dog switch to the up position, then turn the handwheel 1 complete rotation. Voila they should be up. Let me know if it is solved. Chris

This model of turntable automatically stops when the needle reaches the center(the end) of the record. The motor should turn back on if you move the arm to the far right of the player, past its resting spot.

Has the battery been load tested? do that first.

THE TIMER MAY BE IN DEFROST MODE PLUG IT IN AND AFTER ABOUT HALF AN HOUR TO ONE HOUR IT SHOULD TURN ON.

Hi How old is it , ? and dose it soun like the motor is running but not turnning the drum ? this would be a bad belt , you will need to do some more investagating for me to help you

You should start by checking if its charging.
put a volt meter across the battery, it should read roughly 12v
then start the bike and it should rise to 14v
much more than this can blow bulbs and boil batteries

its poossible that the seat switch stay ON permanently (internal problem) and will need to replace it; what is the Chrysler year and model?

I called Braun at1-800-BRAUN-11 (1-800-272-8611) and learned that you may need to remove the head and replace it. If that doesn't work, it may need servicing. Hope this help!

It might be something that has come loose. If the system still works fine, I wouldn't worry too much about it. As a precaution, I would avoid moving your system around too much, especially if there is a disc in the drive. It is also possible that it could be a problem with one of the internal components of the system, but I doubt it.

1998 Blazer. hatch window lock keeps making a noise. like its trying to unlatch.i open window it stops.