Question about Printers & Copiers

1 Answer

Fiery xj 325 software reinstalation

I am trying to reinstall the system software on my Fiery XJ+325 Rip, it seems to need doing every couple of years and in the past it was covered by a service agreement, it is no longer covered but last time it was being redone I took the oportunity to copy the techs recovery CD on my pc. Of course when I come to use it now the disk is unreadable by the rip. Is this because I made the copy CD on a PC when the system disk is Mac? When I put the recovery CD in my pc nothing is visable on it.

Thankyou in advance for any help.
Kerry.

Posted by on

  • 1 more comment 
  • kerryo Apr 23, 2008

    Follow up:



    The system cd did copy correctly.



    The problem was with the rip trying to read the cd, it was a scsi problem that was solved by altering the scsi cd number. When the rip said unreadable media I assumed the problem was with the cd.



    Duh. lol

  • Anonymous Jul 11, 2008

    I need software fot Fiery XJ+325 !?

    THnx

  • jalalx Mar 31, 2009

    I lost the software on my Fiery XJ+325 and don't have the installation CD, I have a CD-ROM drive for it, can any one help me with a CD image for this Fiery pls.
    email: jalalx@hotmail.com


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 158 Answers

Go to:http/fiery.com.sg for tech support.

Posted on Dec 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Patch installation sequence for the Fiery X12 with DC12. Hi, I had a problem with Rip and I installed the 1.5 system, but the system can not find the DC12, it says "Error network controller." I have...


You need install patch "1-56CTS.ps". Try to find it via web.
Also install Fiery Downloader app. Go to File->Download and choose file "1-56CTS.ps". Then reboot a fiery and problem must go away.

Oct 29, 2013 | Xerox DocuColor 12 Printer

1 Answer

Data no transfer in fiery


trying to deleting older jobs in firey hold rip and print que

then try to download new job

if problem is same

try to restore fiery software

otherwise reinstall firy from engineer

Sep 22, 2010 | Xerox DocuColor 12 Printer

1 Answer

Ricoh 6513 Fiery E-710 Reinstall Setup


contact me ranallimike@yahoo.com i have external drive with scsi terminator 2 different software programs one is fiery xj bp 100 color server and one is fiery xj r/r2 v3.1nds/tr system soft ware main program you need you may also contact me via telephone at 740 644 1793

Jun 20, 2009 | Ricoh 6513 Copier

2 Answers

Ricoh 6513 / Fiery E710; Lilo loading / please wait


Been a while since I have seen one of these. But if you have the system software it needs to reinstalled. You need a stand alone cd drive and a scsi cable( I think ).

May 18, 2009 | Ricoh 6513 Copier

1 Answer

Fault code 012-324


its fiery software problem reinstall fiery or restor fiery

Jan 20, 2009 | Xerox DocuColor 12 Color Copier

1 Answer

Booting problems with Canon CLC 1150 Copier


The copier itself doesnt have a hard drive. Since you are talking about Fiery I assume you mean the colorpass RIP attached to the copier. A CD with the software on it actually came with the RIP but it was probably swiped by the dealer. In any case it needs a SCSI CDROM in order to load it. But all is not lost. The hard drive actually keeps a backup of the software on the hard drive itself. Kinda like a system restore partition on some computers. When you switch it on hold down the top right button until the diagnostics pass. then press "restore backup". this will take quite some time. Once it is done you will have to go back into setup mode and re-enter all the network settings. Dont forget the default paper size.

Apr 28, 2008 | Canon CLC 1150 Color Copier

3 Answers

Xerox Fiery Xp12 - Problem (INVALID LICENCE) apears on the screen


You will need to use what came with your machine.
The note from Xerox states this.

NOTE: You will need the Fiery Restore / Update Server Software CD and the User Documentation v2.0 CD that came with your EX12 v2.0 Software

And here is the loading process
  1. Visually check to make sure the Fiery LCD is at the Idle screen before you proceed. This will make sure the Fiery is not in use.
  2. Insert the Fiery Restore / Update Server Software CD into the Fiery EX12.
  3. Press [Menu] button on the Fiery Server.
  4. Press the [Down arrow] button.
  5. Press the [Shut Down] button.
  6. Press the [Reboot System] button. The message 'Rebooting System' will display and disappear after a few moments. The Fiery Server will reboot and complete internal testing. The Restore / Update CD menu will be displayed.

    NOTE: Ignore the message 'It's now safe to power off the system'.

  7. Press the [Up arrow] or [Down arrow] button to scroll to 'Restore System' so this is highlighted. Press the [OK] button. The 'All data will be Deleted. Continue?' message will be displayed.
  8. Press the [Up arrow] or [Down arrow] button to scroll to 'Yes' so this is highlighted. Press the [OK] button. The 'Restoring System...' message will be displayed.

    NOTE: The System Restore will take approximately 7 minutes, during this time the message 'Restoring System...' will continue to be displayed.

  9. Press the [OK] button when the 'Restore Complete!' message is displayed.
  10. Press the [Up arrow] or [Down arrow] button to scroll to 'Exit' so this is highlighted. Press the [OK] button.
  11. Remove Fiery Restore / Update Server Software CD from the EX12.
  12. Power OFF the Fiery Server. The power switch is located on the rear of the server, above the power cord.

    NOTE: Wait 10 seconds before powering ON.

  13. Power ON the Fiery Server. The Fiery Server will boot and complete a self-test.
  14. The EX12 will prompt you to insert the User Documentation CD. Insert the CD and the Fiery will continue with the process. When the process is complete, the Fiery LCD will display the message 'Please remove CD'.
  15. Remove the User Documentation CD
  16. Power OFF the Fiery Server. The power switch is located on the rear of the server, above the power cord.

    NOTE: Wait 10 seconds before powering ON.

  17. Power ON the Fiery Server. The Fiery Server will boot and complete a self-test.
  18. Using the Configuration Report as reference, re-enter the network settings on the EX12.
  19. Install any required patches, as needed. Refer to the Updated Information section on the Configuration Report.
  20. If needed, restore any data that you previously archived. See the Related Items.
elem_1_spacer.gif

Jan 10, 2008 | Xerox DocuColor 12 Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...