Question about Office Equipment & Supplies

1 Answer

Printer does not respond

Unplugged tower to get cleaned up - when everything was plugged back in the printer does not respond

Posted by on

  • Anonymous Dec 19, 2008

    How do you change the IP address on the Sharp AR-BC320 Printer. Currently the Gateway is set to and it should be set to



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

What is most likely the problem is the printer is set up to auto dhcp and it changed the IP address.
You will have to get into the network settings and set the IP to manual and reenter the IP address to allow it to print.
You can find the proper IP address by opening your printer properities and looking at the port. Click the configure port line and get the IP address there and enter it into your printer.
That seems the most likely problem

Posted on Apr 14, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

HP 309a will not respond to anything, will not power off

Go to control panel, click on devices and/or printers, right click on the printer, click on troubleshoot

Apr 05, 2012 | HP Photosmart Premium C309A All-In-One...

2 Answers

All lights on wont shut down wont respond

Hello, maybe you have to do what i call hard reset, unplug it from the light then look round if you can locate any fuise on the print take it off, then allow it for 1hour and try again later

May 07, 2011 | HP Deskjet F2210 InkJet Printer

1 Answer

Only the yellow alarm button is lit and the printer wont respond.

Most probably is Logic Board problem. If under warranty period, pls send to get replacement.

May 29, 2010 | Canon PIXMA MP240 All-In-One InkJet...

1 Answer

Load paper error

Please perform the steps provided in the following HP web link:

If the issue persists, please perform the following steps:

1. Unplug the power supply from the wall outlet.
2. Unplug the power supply from the back of the printer.
3. Wait at least 20 seconds, then plug in the supply back into the wall outlet.
4. Plug in the power supply back into the printer.
5. Press the power button to turn the printer on.

If the issue persists, please repair your printer as the paper sensor is faulty.

:) Dr Tony

Apr 15, 2010 | HP Photosmart C5280 Printer

1 Answer

I dont know where the Dell 725 Printer Power Cord goes into the tower Which outlet on the tower

The Dell 725 printer power cord does NOT plug in to the tower. The Video Cable, on the other hand, plugs in to the tower's video output. Look for a connector like the one from the printer (often USB these days) to plug it in to the computer. There was a diagram that came with the computer that showed how to do all the connections, and the Power Cord does NOT plug in to the tower. USB connections are in various locations on your computer's tower, in the back and sometimes in the front too.

Nov 09, 2009 | Dell 725 InkJet Printer

1 Answer

I have a DCP 8040. I had the computer cleaned of

try to change the port that your printer used.
and then restart you computer..if it still dont worked try to unplug and plug it again...while the computer is ON..

many thanks.

Aug 17, 2009 | Brother Office Equipment & Supplies

1 Answer

Hp 5610 not responding

try turning it off and back on. if that doesn''t work then try to unplug it for a couple minuets and plug it back in

Jan 04, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Printer not responding

Try the HP500Hpgl2 driver, it will work with a USB port.

Dec 13, 2008 | HP DesignJet 450c InkJet Printer

1 Answer

Epson Photo R220

epson printer R 230 flash how

Aug 29, 2008 | Epson Stylus Photo R220 InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

847 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

98816 Answers


Level 3 Expert

7993 Answers


Level 3 Expert

63801 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides