Question about Hitachi 42EDT41 42 in. HD-Ready Plasma Television

1 Answer

Hitachi Model CMPAS14V vertical line

Hello, I have a Hitachi Model CMPAS14. It has a vertical line down the middle of the screen that is about 2" wide. It is intermittent and comes and goes all the time the TV is on. How can I fix this?

Please e-mail to skigal1781@verizon.net

Thanks,

D

Posted by on

  • Anonymous Apr 18, 2008

    I have the same problem

  • Talaine01 Oct 08, 2008

    First I had one vertical line 1inch wide on the left side of screen and then long and behold just when I thought the line was gone tadaa 2 thinner lines showed up!!!!! please advise a quick fix that is not too expensive. I paid way tooo much money for this tv to throw it away!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Anyone experiencing this problem should get in touch with Dave at findsayed@yahoo.com . he sold me a fix for this problem, for much less than the $400-$500 we were told it would cost to fix it. Dave not only solved the problem but provided the best customer service and support I have ever received. ABSOLUTLY the best money I ever spent, saved my T.V. Get in touch with the confidence of knowing he will help you as he did me. Thanks again Dave!!!

Posted on Oct 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sound only w/1 straight red line accross the middle of the screen


try to replace the vertical ic and resolder the vertical section.

Sep 16, 2009 | Hitachi 36UX01S 36" TV

1 Answer

Horizontal lines across middle of screen sometimes


Vertical problem coming from bad solder, or vertical circuit problems!!!
Check for bad solder and capacitors problems in vertical circuit.

Aug 30, 2009 | Hitachi 60SBX78B 60" Rear Projection...

1 Answer

Hitachi 42HDS69 Blue Vertical Lines


I think that you have dry solder joints on either the vertical scan board, the focus board, the line output stage, or the chroma panel. Hope this helps.

Sep 13, 2008 | Hitachi 42HDS69 42 in. Plasma Television

1 Answer

42HDS69 42 in. Plasma has several thin green vertical lines in middle of screen


If the set is still in warranty, call for warranty service. If not and you feel comfortable working on the set, carefully open up the back and reseat all of hte cables and connectors. This can be caused by marginal connections inside the set.

Keep us posted on your progress and results.
Dan

Aug 29, 2008 | Hitachi 42HDS69 42 in. Plasma Television

2 Answers

BLACK LINE


same problem 2 inch vertical line in center of screen! could this be something loose in the back??

Mar 13, 2008 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

1 Answer

Model 42edt41 has 2 inch vertical line in middle of screen. was only on coax now on all inputs.


42EDT41
Symptom: Vert Bar in picture just off center,
Cause: Defective Control pwb (LVDS) TS05678.

If you need the service manual contact me at billyjones@fletchersite.com

Mar 08, 2008 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

4 Answers

Hitachi TV CMPAS14V


is the line vertical or horizontal?

Mar 06, 2008 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

2 Answers

Line down the middle


That could be poor solder connections on the resistors located on the ribbons from the panel to X boards or the X boards themselves. Need to located the resistors, pull the board, and physically look for ring cracks near the ribbon connectors..
Bill

Feb 10, 2008 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

5 Answers

Black line in center of screen


These black lines on the plasma screens are very fixable.  There is a dry solder joint on a circuit board at the bottom of the plasma that needs resoldered.  There are 6 or 7 "ribbons" along the bottom of the screen that correspond to vertical sections of the display, so you just follow the black vertical line down to figure out which one is faulty.  I just performed this fix successfully on my first attempt on a Gateway plasma, but it will work on most plasma's, specifically Hitachi, gateway, LG, Hyundai, & Akai. I think they may all have LG boards, my gateway did.
I can't really describe very well what to do, but I assure you it is fixable.  If anyone is near nashville, I might be able to help you out.  My email is tomp2000@juno.com.
thanks,
ST

Jan 18, 2007 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

Not finding what you are looking for?
Hitachi 42EDT41 42 in. HD-Ready Plasma Television Logo

Related Topics:

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...