Question about Philips Projection Televisions

1 Answer

22" lcd Phillips hdtv has a tendancy to turn off(blackout) on it's own. A second or two prior to self shutoff the screen goes "zappy". The only way to get it going again is by constantly pressing the remote on and off and unplugging the TV---this could take 5min to 30min until the amber light turns blue on the tv. What is wrong with it?

Posted by on

1 Answer

Does the stand on my 42 inch phillips lcd raise up

Posted on Sep 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HDRCA 52" model R52WH77, the pic looks like a big U in the middle of the screen and it turns its self on after turning it off. Sound is fine.


A capacitor is building up power and then when there is too much power it discharges turning the tv back on without you hitting the power button. The tv will need to be repaired by a service tech however get a quote and then decide whether it is better to just buy a new tv. LCD's have dropped in price greatly.

May 07, 2010 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

My 60inch phillips hdtv won't turn on and i can


This problems,cause by the 2 STK dead convergence too.U must have soldering tools,solders and must Know how to solders?Must replaced 2 STK convergence ICS,and some or all it resistors.Tries websites like Tv repair world.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop cost u $300-350 for parts and labors.

May 07, 2010 | Projection Televisions

2 Answers

Picture & sound go on & off every sec, red light blinks 5 times


helloFive blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

shaun

Oct 25, 2009 | Sony Grand WEGA KDF-55XS955 55" Rear...

1 Answer

Samsung T.V. goes on for 30 seconds then no picture


If this is a flat panel LCD tv, this is a sure sign that the panel itself is bad. I have seen this before. Tv comes on works fine then within 5 minutes goes blank.

Aug 07, 2009 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

Magnavox 42 LCD 42mf438b/f7 turns on/off by itself


Mine was doing the same thing. Update the firmware and it fixes the problem. Updating the firmware is done by downloading the file to a thumb-drive from the phillips product support page then plugging in the drive into the side of your television and turning it on. See your manual for slightly better instructions.

Jul 08, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

Phillips hdtv model 30pw9110d/37 won't turn on


Common short the cover cap over the video & sound boards short out if you remove it the cap only (shield metal) it usually will fix this

Apr 28, 2009 | Mitsubishi WT-46805 46" Rear Projection...

1 Answer

Philips 32" lcd hdtv. HDTV no longer displays, but sound still ok


I reset the comcast cablebox. I totally unplugged the cablebox for 20 seconds and then plugged it back in. Turned on both the cablebox and the tv and the HDTV channels operated correctly.

Dec 08, 2008 | Philips 60PP9202 60" Rear Projection...

1 Answer

LC-32SB24U LCD HDTV... Brand new, just out of box. Turn on, goes to language menu for about 1 second max,too fast to adjust, then screen goes black and little green led power light starts to blink. And...


Good Day, texxastam;

Do this:

1. UNPLUG TV
2. HOLD IN VOLUME DOWN &INPUT buttons on TV
3. Plug in the TV. (the TV will turn itself on).
4. A blue "K" should now be showing on the TV screen, release the buttons.
5. Press and release the VOLUME DOWN & CHANNEL DOWN buttons simultaneously on the TV. (A blue service menu will appear on the screen).
6. Using the remote, press the DOWN SELECT button once. (The highlighted line should read INDUSTRY INT (+CAUSE) OFF
7. Using the remote, press VOLUME UP once (OFF changes to ON).
8. Press ENTER. After a few seconds the screen turns green and shows - Industry INIT success - at the top of the screen.
9. Unplug the AC cord for 10 seconds then plug back in.

Good Luck, big IRISH.

PS; I did not make this up... it's from SHARP> again good luck...you may have to do this several times....too...get the timming down.

Aug 07, 2008 | Sharp Projection Televisions

1 Answer

26PF332026 inch phillips lcd


Go to this link :

http://teleservice.xooit.fr/t46-MODIFICATION-DALLE-LCD-QD26-EQUIPER-CHEZ-PHILIPS-ET-THOMSON.htm

Sorry, it's in French, but there are pictures of the modification to do.

Oct 27, 2007 | Zenith D60WLCD 60" Rear Projection...

1 Answer

On/Off Tv


The first suspect on a LCD projection if yours is a KF50WE610 is the lamo itself. The second issue with the blue line is a possible bad LCD panel. There is NO convergence settings on a LCD set.

May 06, 2007 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...