Question about GE 28112 Trio Cordless Phone

1 Answer

No dial tone

All 3 phones says no range, and I can not access my answering machine, none of the buttons work. The letters LL flash on the answering machine.

Posted by on

  • Anonymous Jul 31, 2008

    I have the Model 28112 cordless phone, and the handset says " out of range".

    I have tried un plugging, waiting, and then starting over from the manual but no help. What is wrong? It says this as the handset is sitting on the base, so I know it is not because it needs to be near the base!

  • Anonymous Jul 31, 2008

    On my model 28112 phone, the handset says "out of range". It is sitting on the base, so I know it does not need to be near the base! I have unplugged the phone, waited, and started from the beginning but it still does not work. Help!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have no dial tone on my phones. I can receive calls and my answer machine works ok. I plugged another phone (an old phone) and I have a dial tone on that phone, but not on the new ones

Posted on Jan 22, 2013

4 Suggested Answers

  • 38 Answers

SOURCE: cordless receivers not working

If you have tried the phone base unit in the same jack that works correctly with your answering machine and you still cannot break dial tone, then you have a defective base unit. Jer

Posted on Feb 15, 2008

  • 1 Answer

SOURCE: no dial tone

no dial tone on my cordless

Posted on May 06, 2008

  • 1416 Answers

SOURCE: CANNOT DIAL NUMBER--HAS DIAL TONE---ANS

Hello,

What this indicate means that your phone have been over power.

What you need to do to solve the phone problem is to carefully put off the the phone for some time allow it to relax it self for above five minute then put it on again.

NOTE DO NOT OPERATE THE PHONE IN ANY FORM ON TILL IT LOAD UP TO IT FINAL CAPACITY.

Then you start to operate your phone again and it will resond to your command.

Thanks for using fixya.

Posted on Sep 08, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why no dial tone??


Hi,

have you plugged your new phones telephone line into the telephone socket?

Aug 01, 2014 | BT 4500 Cordless Phone - DECT - Satin...

1 Answer

How to recieve a fax ?


If your printer is connected to a modem make sure that the port has a dial tone. To check for dial tone, try to plug in a phone to the same port that you printer is connected to. If it doesn't have dial tone, you might want to check with your phone provider. Or you can plug in the printer straight to a wall jack.

Once the printer is connected to a line that has dial tone, you can then setup the printer to receive faxes. To set it up, on the control panel of your printer, press on Setup > Fax Setup > Ringing and Answering.

If you have an answering machine, set your printer to pick up 3 rings higher than your answering machine. If not, set it to pick up on the 5th ring that way you will still have time to pick up the phone if it's a voice call.

If you have a voicemail service from your phone provider, you'll need to contact your phone provider to get a distinctive ring feature. Once you'll have that feature, you can assign a distinctive ring to your printer. You can find that under Fax Setup > Ringing and Answering > Ring Pattern.

May 29, 2012 | Lexmark Interpret S405 Wireless All-in-One...

5 Answers

My first line will not work anymore, it just dials and then the person dialing it gets a dial tone. So, I had to forward it to one of my other lines. How do I fix this?


What do you want to change? What feature is programmed on the button?

"EACH OF THESE CODES ARE PRECEEDED WITH THE ""FEATURE" " KEY"

**CONFIG NORSTAR CONFIGURATION PROGRAMMING (INSTALLER)
**SCPLUS NORSTAR SYSTEM COORDINATOR PLUS PROGRAMMING
(CICS AND ICS 2.0+)
**ADMIN NORSTAR ADMINISTRATIVE PROGRAMMING (SYS Coordinator)
**BASIC NORSTAR BASIC PROGRAMMING (CICS & ICS S.0+)
**SET NORSTAR SET PROFILE
**LINE NORSTAR LINE PROFILE
**USER NORSTAR USER PREFERENCES (CICS & ISC 2.0+)
**TIME NORSTAR TIME AND DATE (CICS & ICS 2.0+)
*0 BUTTON INQUIRY
*1 FEATURE KEY EXTERNAL AUTODIAL
*2 FEATURE KEY INTERNAL AUTODIAL
*3 FEATURE KEY PROGRAMMING
*4 PERSONNEL SPEED DIAL
*501 SELECT ENGLISH
*502 SELECT FRENCH
*503 SELECT SPANISH
*6 RING TYPE
*7 DISPLAY CONTRAST ADJUST
*80 RING VOLUME ADJUST
*81 MOVE LINE KEYS
*82 DIAL MODES
*831 AA ON/OFF (CICS)
*832 CCR ON/OFF (CICS)
*833 AA/CCR RECORDING MAINTENANCE (CICS)
*84 AUTO LOG OPTIONS
*85 CALL LOG PASSWORD
*89 PROGRAMMED RELEASE
*9 RUN/STOP
0 SYSTEM SPEED DIAL
1 SEND MESSAGE
#1 SEND MESSAGE CANCEL
2 RING AGAIN
#2 RING AGAIN CANCEL
3 CONFERENCE / TRANSFER
#3 CONFERENCE SPLIT
4 CALL FORWARD
#4 CALL FORWARD CANCEL
5 LAST NUMBER REDIAL
60 PAGE GENERAL
61X PAGE INTERNAL ZONE (1-6)
62 PAGE EXTERNAL
63X PAGE INTERNAL ZONE (1-6) PLUS EXTERNAL
64 LINE POOLS
65 MESSAGE REPLY
#65 MESSAGE REPLY CANCEL
66 VOICE CALL
67 SAVED NUMBER
68 RESTRICTION /COS OVERRIDE
69 PRIORITY CALL
70 CALL TRANSFER (BLIND)
71 LINK (HOOK FLASH)
72 TIMED RELEASE
74 CALL PARK
75 GROUP CALL PICKUP
76 DIRECTED CALL PICKUP
77 CALL DURATION TIMER
78 PAUSE
79 EXCLUSIVE HOLD
800 TRUNK ANSWER
801 CALL QUEUING
802 GROUP LISTENING
803 SHOW TIME
804 WAIT FOR DIAL TONE
805 TEST SETS (2.0)
806 HIDE DISPLAY
808 LONG TONES
810 MAKE BUSY
811 CALL INFORMATION
812 ENTER CALL LOG
813 LOG IT
815 AUTO BUMPING
817 IRAD TRANSFER (CICS ONLY)
819 OUTGOING NAME AND NUMBER BLOCKING (4.1)
#819 CANCEL OUTGOING NAME AND NUMBER BLOCKING
82 CAMP ON
83 PRIVACY CONTROL
84 LINE REDIRECTON
#84 CANCEL LINE REDIRECTION
85 DO NOT DISTURB
#85 CANCEL DO NOT DISTURB
86 BACK GROUND MUSIC
#86 CANCEL BACKGROUND MUSIC
87 "SERVICE MODES (DR-3,4,5)"
#87 CANCEL SERVICE MODES
870 SHOW SERVICE MODES (CICS)
871 EXTENDED RINGING (ICS)
#871 CANCEL EXTENDED RINGING
872 ALTERNATIVE RESTRICTIONS
#872 CANCEL ALTERNATIVE RESTRICTIONS
873 ALTERNATIVE ROUTING
#873 CANCEL ALTERNATIVE ROUTING
88 VOICE CALL DENY
#88 CANCEL VOICE CALL DENY

FEATURE 900 CODES ARE USED FOR OPTIONAL EQUIPMENT SUCH AS:
"VOICE MAIL, ACD, DIAL BY NAME, DOOR PHONE, ETC."
THE FOLLOWING ARE SOME COMMON USAGES:
9** "RAD PROGRAMMING (RAD 2, FASTRAD)"
9*0 RAD TRANSFER (ALL BUT CICS IRAD'S)
9*1 CHECK FEATURE CODES FOR VOICE MAIL
9*2 SMDR Admin
9*3 LOGGER TIME STAMP
9*3 VMI Codes(this was on an 8x24, came up on this code rather than F9*9)
9*4 NORSTAR DOOR PHONE PROGRAMMING
9*5 FLASH LOW RANGE CHECK FEATURE CODES
9*7 ACD ADMIN MAINTENANCE SESSION
9*9 VOICE MAIL INTERFACE (VMI) CODES
900 SMDR,enter an account number to be logged with the call
901 ACD LOGIN
901 VMI Admin
902 ACD UNAVAILABLE
903 VOICE MAIL HIGH/LOW RANGE SELECTION (DISABLED AFTER USE)
903 ACD CANCEL WRAP
904 ACD HELP
904 FLASH ACD LOW RANGE LOGIN/OUT
905 ACD CATEGORIZE
905 FLASH LOW RANGE DN IDENTIFIER
906 ACD RECORD CALL
906 FLASH LOW RANGE VM TRANSFER
907 FLASH LOW RANGE VM INTERRUPT
908 STAR TEXT (OBSOLETE)
908 FLASH ACD LOW RANGE BUSY MODE
909 ACD ANN. MAINTENANCE
909 FLASH ACD LOW RANGE QUEUE STATUS
910 FLASH LOW RANGE LEAVE MESSAGE
911 FLASH LOW RANGE OPEN MAILBOX
912 FLASH LOW RANGE OPERATOR CONTROL
913 ACD CALLS QUEUED
913 FLASH LOW RANGE SYSTEM ADMIN LOGIN
915 NORSTAR VOICE MAIL 2ND LEVEL ACCESS (PSWD=ACCESS2)
920 ACD ADMIN SESSION
921 ACD ROUTING SESSION DAY/NIGHT
922 ACD ADMIN STATISTICS SESSION
923 ACD GROUP STATISTICS SESSION
960 DIAL BY NAME (CINTECH NSVM OPTION)
961 DIAL BY NAME ADMIN (PSWD=1234)
980 VM SEND MSG TO ANOTHER MAILBOX
981 VM LOG INT MAILBOX
982 VM OPERATOR STATUS(PSWD=OPERATOR(67372867))
983 VM ADMIN PROGRAMMING (PSWD=1020000)
983 VM SOFTWARE LEVEL(LOGIN THEN OPTION 9)
984 VM TIME AND DATE(STARTALK Pswd=1020000)
984 AUTO FOREWARD TO VMAIL(NSVM4.0)
984 FLASH ACD LOGIN/OUT
985 "VOICE MAIL DN INQUIRY(RESET VM ADMIN PSWD 9,73738767793)"
986 VOICE MAIL TRANSFER
987 VOICE MAIL INTERRUPT
988 VOICE ACTIVATED NAME DIALING (NSVM 4.0)
988 FLASH ACD BUSY MODE
989 RECORD CALL (NSVM 4.0)
989 FLASH ACD QUEUE STATUS

Jun 23, 2011 | NorStar M7310 Corded Phone

1 Answer

I am trying to access the administrative system for adding/changing voicemail boxes and auto attendant greetings on my Norstar Flash System. normally, i would hit feature 983, Log: 102 0000. but for...


Dial Feature 985
When the display changes to say SET something, dial 9
it'll prompt for a password, dial 73738767793
it'll ask if you want to reset the password, say YES
then you'll be able to login with feature 983 1020000

Apr 27, 2011 | NorStar Flash Voicemail Power Supply Only...

2 Answers

All messages have been deleted but message button keeps binking?????//


Most of the time your home phone service has a digital voice mail like your cell phone does. If the answering machine is set for an amount of rings that is too long the digital voice mail service will answer before your machine. The new cordless phone indicators do show messages on your digital voice mail as well as the answering machine. Depending on your home service, most of the time when you press talk and you hear a different non standard dial tone(mine pulses 3 times before going to solid dial tone) you have a digital message. You need to delete this message before the indicator light will stop flashing. Then set up you digital voice mail for a longer pickup time! This should get rid of this problem.

Mar 07, 2011 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

How to retrieve messages when not at home? Model 26976GE 1A


REMOTE ACCESS

This section explains the remote access process for use with any touchtone

phone.

1. Dial the phone number for the answering machine.

2. After the answering system answers, press any numbered key on the

touch-tone pad to bypass the outgoing announcement, or wait until

the announcement finishes.

3. Enter the security code after you hear the tone.

4. Follow the voice menu to use the answering machine's remote functions.

The remote feature enables you to perform the following functions:

To Press this button

Review message 1

Play back messages 2

Stop message play back 2

Erase message 0

(during message playback)

Skip message 3

Turn off/on answerer 4

Review voice menu options 7
No valid dialing tones for 15 seconds will hang up the telephone line.

You can get the manual on the link below if you need page 31.

http://www.home-electronics.net/USER-GUIDES/26976_DOM_ES_CL_IB.pdf

Good luck

Dec 04, 2010 | GE Spacemaker 26976 Cordless Phone

3 Answers

I have a Emerson DECT 6.0 with 3 head sets and i cant get the dial tone back from pulse.


It was easy for my Emerson Dect 6.0 to be switched either rotary / pulse by just pressing the "FLASH" button for 3 seconds until it beeped. Problem solved.

Or if that doesn't work, you have to:

Tone/Pulse
You can switch the dial mode. In most situations the TONE option should be selected.

• Press the MENU button. Select BASE using <FLASH - or - CID> and press the MENU button again.

• Using <FLASH - or - CID> select DIAL MODE and press the MENU button.

• Using <FLASH - or - CID> select TONE or PULSE and press the MENU button.

OR

Press and HOLD the "<FLASH" button for approximately 3 seconds. T (Tone) or P (Pulse) appears in the display.

Feb 12, 2010 | Uniden DECT 6.0 Cordless Telephone...

2 Answers

Diigital answering machine and 3 portable phones


Here is the link for the manual; http://www.vtechphones.com/docMgt/public/art/20411/ip5850-man.pdf Page 23 - flashing CL means you need to set the clock. All explained there I think Hope this helps :)

Mar 05, 2007 | Vtech IP5850 Answering Machine

Not finding what you are looking for?
GE 28112 Trio Cordless Phone Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4949 Answers

Dudeman321

Level 2 Expert

230 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...