Question about Pioneer FH-P4100 CD / Cassette Player

2 Answers

Stuck in demo mode

The demo mode is not available in the menu as the manual states. Is there another way to turn off demo mode?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 100 Answers

When you are in STANDBY mode hold the menu button for a few seconds and a special menu should pop up. In this menu you should be able to set the clock, turn off or on the beep, and take your unit out of demo mode. Good luck.
-Andrew Hawkins

Posted on Apr 14, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Fixed mine this way...pressed clock button to get in clock mode then pressed #4 button. The unit shut off. Then pressed SRC off button to turn on unit. It came on in CD mode ( I had a CD in the unit), pressed it again to toggle it to radio mode. Now works perfectly! Whew!!!

Posted on Oct 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aiwa CDC-x204 stuck in demo mode


This is what worked for me:
  1. Power the radio off (hold the power button in top left corner in for several seconds)
  2. Remove face plate
  3. Hold in reset 10 seconds
  4. Press push-menu dial/button 3 or 4 times
  5. Insert cd and hit source to switch to tuner before cd starts
Not all of these steps may be necessary.
I suspect having the power off before the reset button was the important part.

Jul 24, 2012 | Car Audio Receivers

6 Answers

Stuck in demo


I had the same issue and was about to give up.
cleaning, key combos and such didn't work out.

Solved the dirty way, as described some comments above:

"Just took the faceplate from the "push-menu" button and hit it against a hard surface [not too hard but not too soft hits] and thats it, it worked again."

ah, the good manners!

Jun 07, 2008 | Aiwa CDC-X504MP CD Player

3 Answers

Demo mode


on my sportster 5 I held down Menu and Display together for 5 seconds to unlock the demo mode

Apr 09, 2008 | Kenwood KDC-MP335 CD Player

1 Answer

Kenwood KDC-MP635 STUCK IN DEMO MODE


Turn the unit onto standby then press and hold the menu button then scroll down to demo using the toggle switch on the right then press and hold the toggle switch for a few seconds and it will change to demo off. It's not too difficult but you are correct, it doesn't tell you correctly in the installation instructions.

Jan 25, 2008 | Kenwood KDC-MP635 CD Player

4 Answers

CDC-X304 in permanent DEMO mode


I HAVE SAME PROBLEM. AFTER I REPLACED MY DEAD BATTERY MY AIWA CDC-X304 IS STUCK IN THE DEMO MODE. ONLY CD WORKS BUT ALL BUTTONS ON FACING DO NOT RESPOND. ANY SUGGESTIONS HOW TO RESET.

Jan 16, 2008 | Aiwa CDC-X304 CD Player

5 Answers

Unable to turn off DEMO MODE


1. Turn Radio On
2. Change Source input to Stand-By
( Puts radio in display only Stand By mode.)
3. Press Menu Button
( Gives you standby menu)
4. Toggle display with control knob until DEMO ON appears
5. Hold control knob in until DEM0 OFF appears
6. Press Menu Button
7. Change source back to music.
All done. same as other Fixes - Just step by step!

Sep 09, 2007 | Kenwood KDC-MP435U CD Player

3 Answers

Demo Mode will not switch


I had this same problem, you have to be in menu mode to turn off DEMO mode.

Sep 01, 2007 | Kenwood KDC-MP205 CD Player

1 Answer

Cant turn off the demo mode


There is often confusion in the way the manual states how to achieve removing demo mode. Because this is listed in the "Menu System" section of the manual and assumes you read from page 1 of the manual that you will know to enter the menu in this section of the manual. Here is step by step instructions on removing demo mode on your unit. 1. Go to standby mode 2. Press and hold the menu button till the menu comes up 3. Press control knob towards AM or FM to scroll through menu till you locate "Demo On" 4. Press control knob straight in for approximately 3 seconds till it switches to "Demo Off" 5. Hit menu button again to exit menu

Apr 05, 2007 | Kenwood KDC-MP732 CD Player

1 Answer

Kenwood demo prob...still


There is often confusion in the way the manual states how to achieve removing demo mode. Because this is listed in the "Menu System" section of the manual and assumes you read from page 1 of the manual that you will know to enter the menu in this section of the manual. Here is step by step instructions on removing demo mode on your unit. 1. Go to standby mode 2. Press and hold the menu button till the menu comes up 3. Press control knob towards AM or FM to scroll through menu till you locate "Demo On" 4. Press control knob straight in for approximately 3 seconds till it switches to "Demo Off" 5. Hit menu button again to exit menu

Feb 18, 2007 | Kenwood KDC-MP232 CD Player

Not finding what you are looking for?
Pioneer FH-P4100 CD / Cassette Player Logo

1,373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Pioneer Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...