Cycle isn't using Jet Dry

Sounds like your not using a rinse aid. Fill the dispenser with jet dry. Not only it keeps dishes spot free but it help to dry them as well.

Pam,
Haas someone turned off the heat option on the controls? Is your jet dry dispenser empty and in needing of re-filling? One thing that my wife does as well is to crack open the door after the cycle is done to let the steam escape and then they dry without all the excess water in there. Hope this helps!

I've got one of these countertop washers at home. The twist off dispenser you're talking about is for the jet dry (at least on mine) and there should be an area on the right side of the door for your soap. Hope this helps!

If the jet dry dispenser is full, it will last you about 3 or 4 months depending on how often you use the dishwasher

open door look on the inside if you have a knob beside your detergent door un screw it like a soda cap counter clockwise. Pull out fill hole with liquid jet dry. screw cap back into place clockwise. just snug, not too tight. your cup should be full and dishes spotless. However not all have the jet dry dispensers so you may have to buy the dry variety that hangs in plastic basket on your rack.

If dishes still have spots you may have a water problem that may require a sevice technicians assistance for you.

Check inlet water quality & whether softening salt is required. Check and fill rinse aid. refer user manual.

check the top of the cabinet after the unit has started to wash the water droplets is the key. if you see water droplets on the very top all over then the unit circulation pump is working. If that checks out then check the jet dry compartment. here is a trick.
open the compartment door, fill compartment until it cant hold anymore liquid,close compartment door,lower and raise the door 3 times,open compartment door check to see if you fill with more jet dry,repeat this process untill it cant take anymore.
what this does is removes the air out of the compartment. this will last for about 10-12 washes. last thing is to turn your faucet water on until it is the hottest then start your machine. use cascade soap and no tablets. when you use tabletrs with jet dry the machine over suds, the rinse aid compartment or dispenser is vidal to drying,cleaning spots and film. hope this helps.

1.you must fill your dispenser with jet dry.2. make swure water is hot going into maching from faucet then start machine. 3.add cascade soap. you will see a big difference. im a old bosch tech:) let me know what happens .

check for over sudzing. dont use a cascade with jet dry in it. use regular dishwashing liquid and fill jet dry compartment. you can even jet dry level by turning the knob in dispenser.

as ur machine is still under warrenty u should go in touch with GE and have thos problem solved free of charge....