Question about Akai CFTD2011 20 in. EDTV-Ready LCD Television

3 Answers

DVD video showing without DVD in

DVD showing on screen, cannot get back to
TV

Posted by on

  • nightgirl Apr 13, 2008

    I tried all of those and it did not work

  • nightgirl Apr 13, 2008

    DTV tv button on remote worked thanks

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

On the dvd remote, you can try pressing the vcr/dvd button if it is a combo dvd/vcr device which will switch between the two devices which tv antenna should run through the vcr.

also try pressing the "tv" button on your remotes or "antenna" button depending on the remote

Also try pressing the tv/vcr button on your remotes.

Please let me know if none of this works and if you can post a picture of the remotes that would be great! Thank you

Posted on Apr 13, 2008

  • Benjamin Patri
    Benjamin Patri Apr 13, 2008

    have you tried turning off the dvd player and then changing from video 1(or 2,3,etc.) or input 1(or 2,3,etc.) to tv again



    What do you normally do to switch between them to get it to work? Also, do the remotes work or are the batteries dead?

  • Benjamin Patri
    Benjamin Patri Apr 13, 2008

    glad it worked, please don't forget to rate this solution and have a good day.



    If you ever need more help with your tv, please feel free to contact me through this website at anytime and I would be more than happy to help.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

You need to use the remote control and chance the source to tv or tuner.

Posted on Apr 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 871 Answers

Have you tried pressing the dvd button twice on the remote?

Posted on Apr 13, 2008

  • 2 more comments 
  • earl norman llanera
    earl norman llanera Apr 13, 2008

    yup! use the remote...if the remote is not working, try changing the batteries of the remote....

  • earl norman llanera
    earl norman llanera Apr 13, 2008




    hey nightgirl,

    there is still one thing you havent tried...

    if the remote is not doing anything to help at all, have you manually clicked the channels button ton the tv itself?

  • earl norman llanera
    earl norman llanera Apr 13, 2008

    helllooo...

  • earl norman llanera
    earl norman llanera Apr 13, 2008

    so you mean that the tv buttoon works now and the problem is fixed?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to do a timer recording to a Toshiba SD-V296KU DVD Video Player/Video Cassette Recorder. all seems to go with the recorder device but when I do the playback it is a blank screen. Is that because the...


I have a Toshiba DVD Video Player/video Cassette recorder - the problem is that when I set the VCR to record for an hour it will record for less than that hour and eject the tape. Help!

Mar 01, 2011 | Sansui HDLCD-4212 LCD TV

3 Answers

Run the signal from a AKIA DVD Lcd TV to a Projector Screen TV


from the back of the tv player it will connect to the projector on the big screen usig rca leads

Jul 30, 2008 | Akai CFTD2011 20 in. EDTV-Ready LCD...

1 Answer

Dvd looks to be playing but tv screen showing hdmi player 1 (hdd/dvd)


hi,
try to connect dvd any other hdmi input of ur tv. and try again. or connect ur dvds component video output to ur tvs component video input.and then try. if u have any other hdmi device connect it to ur tv and test the tv , is it has any trouble.
ok

Dec 17, 2010 | Flat Panel Televisions

1 Answer

I Have a Samsung flat screen ser# LNS4692DX/XAA that video went out and went to dark blue on all channels,still have good audio but cant even get a menu screen any suggestions?


Hi,
Unplug tv from wall socket for minute to get it reset, replug back in and turn it On
Do you get Menu screen now or tv shows channels?

If problem still not solved then let me know how old is this tv and any related info about problem like storm or lightning in area that caused this problem in tv. Does tv show picture in dvd playback?
Thanks.

Nov 04, 2010 | Samsung SPN4235 42 in. Plasma HDTV

1 Answer

Trying to hook up dvd player to a philips 27ps55-s121. I cant get it to show up on the tv screen. I dont know what channel the tv needs to be on to show the dvd. and i am unsure where what plug (cable)...


Connect one end of the VIDEO
(yellow) CABLE to the AV1 in VIDEO
jack on the back of the TV. Then connect
one end the AUDIO (red and
white) CABLES to the AV1 in AUDIO
L and R(left and right) jacks on the rear
of the TV. Connect the other end of the cables to the appropriate color on the DVD player (yellow to yellow etc.)

Press the CH + or – buttons on the
remote to scroll the channels until AV1
appears in the upper left corner of the
TV screen.
Slide the TV/VCR/ACC switch to
the VCR position.
Insert DVD into player and press PLAY.

Aug 23, 2010 | Philips Flat Panel Televisions

2 Answers

How do I hook up a DVD player to a proscan 32 inch flat screen tv?


Hello,

to connect your TV to your DVD, you will be needing a RCA wire (Yellow, white and Red wire). The yellow stands for video (visual/display), while the read and white stands for audio (sound).

Look at the back of your DVD, look out for Video Out, connect the yellow wire there. Also look out for Audio Out L & R, connect the white and red wire there.

Then turn the back of your TV, you will find Video, and Audio IN, Connect the other part of the wires from the DVD to the DVD, that is, Video for video and audio for audio.

Once you have connected the wires, turn on your TV, and your DVD player, press source on your TV remote to AV, and you will see your DVD displaying on your TV.

That's to hook up your DVD to your TV. Follow instructions carefully and you won't have any problem.

Good luck.

Apr 17, 2010 | Proscan 32LA30Q Television

1 Answer

My tv won't show any video. It will show the menu and other on screen info... but no video like dvd or anything.


Unplug TV form AC socket for couple of minutes, replug back in and turn it On, if problem still exist then TV got problem with video processor board and it is job of qualified TV tech to fix it.
Thanks.

Oct 10, 2009 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

1 Answer

I can't seem to get my dvd player to play on screen


Set the TV to look for a signal on the same input your are hooking your dvd player to. Example, if your dvd is hooked to video 1, set the TV to show video 1 on the screen.

Dec 31, 2008 | Dell Flat Panel Televisions

2 Answers

DVD is wired to the VCR and does not work


The Sony Bravia should have a number of component inputs, so you should be able to hook up the DVD directly to the TV. The only reason for hooking it up through the VCR would be to record a DVD on VHS... but that's for the birds--VHS is old technology.

Each component input on the back of the TV has a number. You then select to view the component you want by pressing the remote control button to change the display (it should show with one you're on... e.g., Video 1, Video 2, Video 3, etc.).

Dec 24, 2008 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

1 Answer

How to record from my Sanyo DTV to my Sony Recorder?


first have the video recorder connected to the tv correctly,either coax out, red.white,yellow out, componant out or hdmi.[ see on back of the unit & the tv which connection you used.input selector is also known as video/source/line in or aux, sometimes even game. if there no such button on your remote, scroll down from channel 2 and you should be in some aux input.have the dvd playing,then you should see the video when you get to the right input.
wg

Feb 17, 2008 | Sanyo DP26746 26 in. LCD Television

Not finding what you are looking for?
Akai CFTD2011 20 in. EDTV-Ready LCD Television Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Akai Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...