Question about Fax Machines

7 Answers

After programming my TE-2200 Casio, when I try to register an item I get the error message E026 (Enter Condiment Preparation PLU). How do I get rid of this? I do not need condiment PLUs nor do I want to have to enter another PLU after each item. Please advise ASAP.

Posted by on

  • janieredmon Apr 15, 2008

    I keep getting the same advice, (i.e.) read the manual. Also, I received one answer that said to look at the example and the link to the example was not attached. I would not have posted this question if I had not read the manual in its entirety previously. And, yes, there is an error code page, but the only thing it says to do for this error is to enter a "condiment" PLU. Nowhere in the manual does it give you instructions on how to enter a "condiment" PLU. The instructions are for PLUs in general. Also, my cash tendered key is still programmed with an amount that I am unable to get out. Please Help!

  • Anonymous Mar 29, 2014

    when i scan any item i got this message but was working before thanks for your help

×

7 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Fax Machines Master
  • 3,614 Answers

Read the manual over & over again..

Posted on Apr 15, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,889 Answers

Read the 104th page of this manual.. It contains all the error codes and their resolutions..

http://www.casio.co.uk/pdf/cashreg/TE2200_User_Manual.pdf

Posted on Apr 15, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 652 Answers

Friend see, the following example
I think, it will you.
After programming my TE-2200 Casio, - db35abf.gif
Thanks
Iqbal

Posted on Apr 15, 2008

  • Iqbal Husain
    Iqbal Husain Apr 16, 2008

    Friend,

    I was given the pic of example, It was from your manual. I was just tried to get your attention on the example. You can save it on your computer and then see in full-screen mode. To save right click on the picture and select save picture as..



    Anyway can you find any where in your manual, how to reset default settings. Because i think if there is any conflict due to in appropreate value a reset can fix it.



    Then after fixing you can try again your programming whatever you need.



    Thanks for feed back and gud luck.

    Iqbal

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 377 Answers

Re-configure again your setting's maybe you possibly turn on the features on PLu..

Post back...

Thanks

Posted on Apr 15, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 209 Answers

Dear Janieredmon

Right well Im guessing that you should be going to the website of your manufacturer/ vendor of your device and looking under the support/ technical help area of their website, they also have a FAQ (frequently asked questions) area, where common problems are discussed, and help given where possible.

Now the thing that im perplexed about (baffled) is why your model number has come up as a cash register/ tilling system, when you have a problem with a fax machine. Now my sheer advice with regards to this is to go and visit http://www.google.com and bag yourself the service sheets for your device/ till/ fax machine and then evaluate what you have. Typing your manufacturers/ vendors model details followed by the words "user manual" should bag you a few good results. Once you have found the manual, its then best to go to adobe and get a copy of adobe reader as you will need this in order to read the PDF file that the manual will be transported to you using.

Now once you got the manual, and you have read it, dont forget to back it up onto disk so if your computer crashes, at least you still have the manual on disk.

If you get no joy on the internet, get back in touch with me, and i will try to get hold of the manual location and then will send you the correct details of where to get it from. Until then really, there is not a lot I can do about this either unitil i know what it is exactly im dealing with, or i have a model number for your product.

As before, if in doubt, consult your dealer of where you got the product from in the first place, and also go and try to contact the manufacturer/ vendor of the device/ product.

i have a telephone number and URL address of casio to get you started, and this is as follows:

http://www.casio.co.uk/Support/Manuals/

http://www.abl-systems.co.uk/manuals/CASIO_TE2200_USER.pdf

telephone number is available from either http://www.118.com (in the uk) or you can go to http://www.casio.com

I have provided the link for the usermanual to the product number you havbe enquired about (casio te-2200) and the link is above. It must be a good manual, as it even tells you how to remove the cash register from the original packaging.

I hope this is satisfactory to your needs and standards, and look froward to hearing from you soon with regards to this or any other registered matter. (matters either relating to cash registers, home appliances, white goods, electronics, and other consumables.

take care and good luck

oz

Posted on Apr 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Hi,

E026 means that no condiment/preparation PLU is entered.
To fix this error you will have to register the condiment preparation PLU.

Click HERE for the manual to see the troubleshooting steps.

Goodluck,
Please don't forget to rate the solution.

Posted on Apr 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,944 Answers

Hi,

Are you sure this is a fax machine?

Posted on Apr 13, 2008

  • Damen Wong
    Damen Wong Apr 13, 2008

    From the model number, it should be a cash register. Correct?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a casio te 2000 which was programmed with the wrong business name on the printed reciept how do I correct this


You can find the manual here:
http://www.casio.co.uk/pdf/cashreg/TE2000_E0201A.pdf

I think what you need is described on page 52:
Programming receipt message/logo stamp control function

Mar 11, 2011 | Fax Machines

1 Answer

Muratec F-320 Super G3 we are getting a fax ready Please call Service message


Please Call Service means the machine "thinks" it has detected a fault.
To check do the following..
Press PROGRAM,*, 6
Then press PROGRAM to select Service Call mode, then press ENTER....the error message will be displayed in the display.
Most common error given machine age was "Heater Error".
If this is the case you will need a Serviceman to do repairs to the Fuser Unit.

Oct 25, 2010 | Muratec F320 Plain Paper LED Fax

1 Answer

How do you reset memory board for muratec f-320 . I am trying to get rid of an error message"Replace drum unit printer not useable". Installed new drum unit and still gives the same error message.


Before doing complete Memory clear try the following...
Press..PROGRAM,*,*,I(thats the letter I),then ENTER.
That should reset it. Only replace the new drum into the machine when the machine says "Replace Drum"...NOT when it says "replace drum soon".
As a last resort a complete memory clear is PROGRAM,*,3.....but be warned this will clear all memory back to factory defaults "except" the Life Monitor which has the counters.

Oct 29, 2009 | Muratec F320 Plain Paper LED Fax

1 Answer

Can not get rid of the paper jam error message. i


Try restarting the device. This might help!

Sep 02, 2009 | Brother Fax Machines

1 Answer

I have an error code coming up E32. I have pressed the clear button but it is not clearing. I can not enter anything under any department.


Hi Skitso,
The problem is listed as afax machine error but the error code quoted seems more to be that of an error on a cash register.
If this is correct and it is a Sharp cash register the error is telling you that you need to enter your clerk or cashier ID.
For ease of reply try pressing the "1" and then the CLERK ID key.
Regards
Gavin.

Oct 08, 2008 | Sharp Fax Machines

2 Answers

Machine Error 76


Machine error 76 is a bad fuser lamp. Machine error 78 is a bad thermistor. Machine error 77 means you hade either a Machine error 76 or Machine error 78 and turned the machine off.
Sometimes the machines will give a false code and can be reset. Unplug machine. Hold down the Menu key while powering back up. You should still get a Machine error message. Enter the number 9...The display should change to Maintenance 9 then enter 1. The Machine error will return. Enter 99 and then make a test print. If you get either a machine error 76 or 78 you will need to have service done on your machine to have either the lamp or thermistor replaced, and depending on the usage of the machine, it might not be a bad idea to replace the entire fuser.

Jan 18, 2008 | Brother IntelliFAX 2800 Laser Fax

1 Answer

Error message 714


hi RESET !! first clear all files from the memory cards (if there is) enter "001" and press "set" to delete all files enter "1" (page 143 ) http://service.us.panasonic.com/OPERMANPDF/DX2000AU.PDF take the battry out (page 196) unplug the device for a day and assemble it hope it works good luck

Apr 04, 2006 | Panasonic DX-2000 Plain Paper Laser Fax

Not finding what you are looking for?
Fax Machines Logo

Related Topics:

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fax Machines Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

polytek

Level 3 Expert

452 Answers

Are you a Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...