I have 1 computer a laptop. i want to use it throughout my entire apartment. without being stuck in my bedroom with the cable from the highspeed modem to the laptop. what other devices do i need? there is a wireless card in the laptop.

Over here in my neck of the woods an apartment one bedroom would have a 1.5 ton unit, a 2 bedroom house 2 to 2.5 tons a 3 or 4 bedroom home would be a 3 ton or 3.5 ton. Without numbers no one can tell exactly what you have there. Figured i could give you an idea. If you have 8 foot walls go by a ton for each bed room in the house.

sounds like the LCD cable connection to the motherboard is loose. if you can, refer to the manual to remove and reconnect the LCD cable connection to the motherboard making sure it is securely attached. if this does not work, test if the same display problem will appear to an external monitor once connected to the laptop. if it does, it would be a video card problem and you'll need to get it replaced. if it only happens to the laptop LCD even after reconnecting the cable connection for it, you may need to get it replaced. hope this helps.

u need to update the usb hubs drivers without the current drivers the 2.0 port will function as a 1.1 port go to the device manager and update drivers for the usb root hub

Can you rotate the computer, so that the antenna in your computer is physically closest to the router?
If your router has a single-pole antenna, make sure that it is vertical -- the signal goes "sideways" from the antenna.
If your router has more than one antenna, follow the manufacturer's directions for pointing each antenna (typically a 'V' for twin antennas).

Access the router's built-in web-interface, and confirm that the router is transmitting at 100% power.

*Take out the battery,
*Remove main supply,
*Hold power button down for 30 secs,
*Put only power supply in, do not put battery in
*Turn laptop on
*Put the battery in.

or this:

1. Remove power supply and battery.
2. Hold power button down for 30 seconds.
3. WHILE STILL HOLDING DOWN POWER BUTTON, INSERT POWER SUPPLY, THEN INSERT THE BATTERY. *THE POWER BUTTON SHOULD BE HELD, THROUGHOUT THIS ENTIRE STEP.
4. At this point, the blue light and the charging light should both come on, and the computer should start properly.
And check ur operating system for errors by downloading reginout

Go to control panel, then go to performance and click view computers information and it will tell you processor, ram, frees-space, and more

there are two things that could be happening here either

1. You need to change the settings on the t.v. to use cable instead of antenna for the programming (easy to spot if channels that are usally on one number are on another)

OR

2. you have requested highspeed internet and digital cable from your cable company, and they have installed a trap to keep you from accessing channels 12-72 or something to that effect because the data stream from your cable modem and the data stream for your digital cable are in the lower freq. band often indicated by a blank(black or blu) screen on certain channels

if scenario 2 is the case call cable company and ask that they remove the channel trap because you are not receiving the service you requested

download setup wizard to find connection from windows

for dial up simply a modem .... on laptops if you do not have a builtin modem you can purchase a pc-card modem that goes into your pcmcia slot ... for highspeed either a ethernet (same option as modem) but almost all modern laptops have a built in ethernet ... or usb ... also I highly recommend a router if you are going highspeed ... even if you only have one computer ... a router will protect your system because it provides a NAT firewall. If you go with a router make sure to set up the internet connection on the router do not tunnel through the router with a PPPoE connection

how can i have apple tv in my bedroom tv without my computer in the room