Question about AEG 23 in. 68001KF-N Electric Cooktop

Open Question

Hob is not working and showing error notice E3

Hi, last night we had been cooking loads, and we heard a small bang and the hob went off, we have the hob fitted over the oven which had also been working most of the day, we can't remember if there were fuses underneath the hob when we fitted it, and could this possibly be the problem? thanks very much Denise Long

Posted by on

  • 2 more comments 
  • Warfy Oct 15, 2008

    I have had exactly the same problem this morning, a small bang/pop then error E3. The earliest the AEG repairer can come is next week.



    Hob is less than 2 years old and in the UK.

  • kenelmhoare Nov 28, 2008

    Yes exactly the same thing. Went to put some cooking on and then there was a pop/bang and when i put the power back on the hob said E3!

  • malhanco Jan 18, 2009

    I have the same problem, had a power cut at home when power resumed hob showing message E3 on display now won't work. Has any one fixed this problem

  • Malcolm Greenaway
    Malcolm Greenaway May 11, 2010

    Which country please?

×

3 Suggested Answers

SparkGap
  • 363 Answers

SOURCE: Hob light up.

I take it the two fuses you mention were the house fusebox and the fuse in the outlet in your kitchen? If you know the mains is getting to the hob and nothing at all is lighting up on the panel then this sounds like a job for the professionals. I can't find any mention of a reset button or user acessable fuse in the manual. The only thing left to do is check the main wire connection underneath the hob - if it is accessable. (switch off at the wall first!) Assuming you are in the UK Service force telephone number is 08705 929 929 Hope this helps.

Posted on Sep 30, 2007

jyackle5
  • 8197 Answers

SOURCE: Need to fit an induction hob (DTi714V) into a

Go to link below to see how to install.

http://www.dedietrich.co.uk/documents/dti714.pdf

Posted on Apr 19, 2010

  • 1 Answer

SOURCE: Want a narrow ceramic cook top / hob

Look at Baumatic 90cm Slimline 4 Hyperspeed Zone Ceramic Hob. Dimensions are 350mm x 880mm

Posted on Apr 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E3 problem in Prestige induction cook top


That error means the voltage sensor has detected higher voltage then should be present. This means power supply is bad.

Mar 04, 2016 | Cooktops

1 Answer

Residual indicators & right hot plates don't work!


LOL like the way you put that about FAULTY ELECTRICIAN . and that would be my guess also .

Feb 11, 2016 | Cooktops

1 Answer

Telefunken spare parts australia


Try turning off the power for a short while to allow the p c board to re set itself turn it back on and individually turn on each elements for a few minutes. Good luck
Ray

Apr 16, 2014 | Kuppersbusch Glass ceramic induction hob...

1 Answer

I was boiling water for potatoes on the Electrolux induction cooktop last night. Only using one of the five burners when I heard a "pop" sound and possibly a flash of light. Error code we have is EO


Hi Gail, I am happy to assist you!

It appears the main control has detected a faulty or error condition. "E0" should be followed by two more digits to indicate which error has occurred. Let's try turning electrical power supply off. It is necessary to wait roughly ten minutes to reset cook-top main controls. If resetting the power does not correct the issue or provides a new error code, at this point, I would recommend having a service technician to diagnose the problem before investing in unnecessary parts.

Dec 20, 2013 | Electrolux 36" Electric Hybrid Induction...

1 Answer

Won't switch on


a hob ??? or am i just stupid ??

Nov 23, 2011 | Bosch Cooktops

1 Answer

My Neff induction hob has prgressiely getting worse. All the lights start flashing and only hob will work. But after 10 mins the other hobs start working. The flasing gets worse if you try to start with...


Hi, if you take off the magnetic knob & let it flash a little longer, then switch off & on again it will work. Ours is doing the same. The book says it needs cleaning, as do the customer services people but I've cleaned & cleaned it & I assure you it's spotless. You don't have to wait 10 minutes though to start cooking, just 1 after switching off. It is very annoying though & I think we will be getting an engineer out to look at it.

Nov 29, 2009 | Neff 23 in. T1443 Electric Cooktop

1 Answer

Electrolux insight cooker EKT6045 problem with hob controls


i have an electrolux model ekt 6045 it does not stay on it comes on for 1sec then goes off wot would be the cours of this please the oven stays on but the hob doesent thank you.

Aug 11, 2009 | Electrolux Cooktops

2 Answers

Cillit bang damage to stainless steel hob


I left cillit bang on my Whirlpool stainless steel hob. It left a real mess and looked ruined, however I have a solution. You need Astonish cream cleaner, I got mine from the Kleeneasy catalogue, just get a damp cloth and rub gently all over. You might need to do it a few times, wipe it clean with kitchen roll then rub some oil (I used olive but baby oil is good) and it should buff up to a really good finish.

Mar 19, 2009 | Cooktops

2 Answers

Candy sprinter


Great.. finally. i manage find from solution from user guide.. L is Locked. below is the instruction. will check out tonight. 
The locking function holds the current settings, or prevents anyone from starting the hob. It is also used for cleaning the control strip as the controls can be locked without the hob being on. To lock the hob : -Press the on/off button     . -Press simultaneously " - " button and " + " button of the front right zone (PVD 633 front left zone), and then press again on the " + " button of this zone. The hob is locked, the locking indicator " L " is displayed on all zones for 20 seconds. To unlock the hob : -Press the on/off button      . The locking indicator " L " is displayed on all zones. -Press simultaneously the " - " button and the " + " button of the front right zone (PVD 633 front left zone), and then press again on the " - " button of this zone. The hob is unlocked.

Jun 24, 2008 | Cooktops

Not finding what you are looking for?
AEG 23 in. 68001KF-N Electric Cooktop Logo

Related Topics:

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Cooktops Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

meztang
meztang

Level 2 Expert

112 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you an AEG Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...