Question about Standard (CRT) Televisions

1 Answer

Remote not working, TV won't turn on.

I have a Conia C2170 TV. It was turned off with the remote last time it was used. Now we can't turn it on with the remote. The power supply light comes on when you press the button on the TV but not the screen. Is there a trick with the buttons that I can do to turn it on?? Or could there be something wrong with the actual TV. The remote may work for other commands as far as I know but we can't find out till we get the TV turned on.
*Code on remote says: KK-Y237B

(I have another TV that you can't turn on with the manual button if you turned it off with remote as well....very annoying...especially with kids!!)

Thanks for your time.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Standard (CR... Master
  • 1,635 Answers

Some TV sets have a vacation switch in the rear of the set. This is to allow it to be in standby but not turn on. Check for this feature if your set has it, and it is turned on.

If the set has failed:
It sounds like something in the TV failed. Common failures in these sets are the power supply and scan circuits.


Jerry G.

Posted on Apr 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Conia c4250 tv stuck on child lock and i do not have a remote. Please help


You need a new remote. Some features can only be removed with the remote. You can try unplugging it overnight, worth a try.

For sales enquiries, please contact us on:
CONIA Australia Pty Ltd
Email: sales@conia.com.au
For product warranty and services, please contact below:
Fax: 03-9877 5589
Trading hours: Monday to Friday, 10: 00am - 5: 00pm Email: service@conia.com.au

Apr 16, 2016 | Standard (CRT) Televisions

1 Answer

Vivo tv won't turn on lost the remote and the


These are the universal remote control codes to Vivo TV. 0004 0005 0009. Check this link to know more codes and proceedings to other brands of remote controls, and buy one remote control that has setup codes with your TV. The above said codes are for GE remote with Vivo TV.

Jan 23, 2013 | Standard (CRT) Televisions

1 Answer

RCA Truflat TV 27F522T is completely locked both manually and remote do not work. Was working manually but after checking menu for block accidently FPA locked not can't turn on tv at all.


You must have its remote control to unlock this TV. Try to make your remote control get repaired, and check these.
Most RCA sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.


Jun 28, 2012 | Standard (CRT) Televisions

1 Answer

How do you turn off the FPA lock on the RCA TRUFLAT TV? I Can't access menu.


Hello
First of all, you must ahve its original remote control to unlock FPA lock. If you have it, go through the folloing steps.
* Hold down Menu button on the remote control, and the Volume Down button on the at the same time for at least 4 seconds. "The set won't say so, but the lock will be released".
** Hold down Zero button on the remote control, and the Volume Down button on the TV. The set won't say so, but the lock will be released.
*** Hold down Menu button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. The set won't say so, but the lock will be released.

Mar 11, 2012 | RCA TruFlat 27F520T 27" TV

1 Answer

My RCA Truflat T.V won't turn on and the FPA lock is turned on, I have the original remote. what should i do?


TV won't turn on • Press the TV button. Make sure the TV is plugged in.• Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in something else.• Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check the remote control solutions on page 26.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Lock Fr. Panel in the PARENTAL CONTROL menu and press OK (box won't have check mark).Buttons don't work
• If you're using the remote control, press the TV button first to make sure the remote is in TV mode.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Lock Fr. Panel in the PARENTAL CONTROL menu and press OK (box won't have check mark).• Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.TV turns off unexpectedly • Sleep timer might have been activated. Go to page 24 for instructions.• KidPass might have been activated. Go to page 21 for instructions.• Wake-Up timer turned on the TV and no remote or front panel buttons were pressed for two hours.• Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then
turn on again. If this happens frequently, the voltage in your house may be abnormally high or low.
• Unplug TV. Wait five minutes. Plug it in again.

Sep 16, 2011 | RCA 20F420T 20" TV

1 Answer

I accidentally turned on the fpa lock and don't have a remote. What now?? Any hope? I also could not get the CC up before I got locked out.


Hello
To turn out FPA lock with RCA TV, you must have its original remote control handset. If you haven't one, just buy a new one of borrow it from your friends or relatives, who own the same model of RCA TV. After unlock, you can use any other remote control. If you are using the original remote control, do the following to unlock it.

Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
OK.

Sep 01, 2011 | RCA TruFlat 27F520T 27" TV

2 Answers

My tv wont come back on fpa lock on


Press Menu Button from any Remote control ( RC) by which could turn on your TV, press menu , menu drop down list will be visible on ur screen then wait 4 a minute or more till ur RC stop blinking , then go to Preference menu , go to FPA lock, turn it off. enjoy.
Deva

Apr 21, 2011 | RCA 20F420T 20" TV

1 Answer

Conia Tv


not digital? must at least 30 years old... lol
turning it off and on consantly means to me your Power Suppy or high voltage is too high on the verge of "shut down" this means something overheating but my best guess is that your suppy is sending way too much voltage to all circuits... get a schematic and voltmeter.

Sep 14, 2008 | Standard (CRT) Televisions

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...