Question about Brother DCP 130C All-In-One InkJet Printer

1 Answer

Brother DCP-330C We have connected all the cords upto the computer but it won't let the paper print, there is no problem with the paper because when we push mono button it prints out a blank piece of paper, the ink has just been renewed and says theres lots of it left, so whats the problem?

Posted by on

  • Anonymous May 02, 2008

    Photo capture light and exclamation light flashing and you can't turn it on or off.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 832 Answers

Do run a simple color copy by coping some kind of newspaper or magazin article. If its ok and all colors +bk can be seen you have to:
1. disconnect the dcp from usb pc board.
2. Uninstall the whole mfl-pro suite.
3. Uninstall the paperport progr.
4. Do make a restart of pc.
5. Install the mfl-pro suite once again AND WAIT(!) until software demands the usb from dcp printer.
Now you should be able to print from pc doc etc. (choose at printer pref the dcp as the standard printer!!!)

Posted on Apr 13, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hello - my Brother DCP 330C printer is printing horizontal faded lines on both color and Black and white copies. I have changed the toner in all areas but still no change. Could the problem be with the...

I have a brother MFC 3240C. My Black ink stopped printing(initially printed horizontal faded lines and gradually got worse), the other colors were printing fine. I tried cleaning numerous time( 50 -100 times over 1-2 weeks ). Still no improvement. The way I print now is:
1. I go to Printer Properties
2. Change Media type from "Plain Paper" to "Inkjet Paper".
3. Change Quality to "Photo".

This takes a long time to print 1-2 minutes per page. However, this works for me since this is my Home printer and use it for printing only few pages here are there.

Good Luck

Jan 28, 2010 | Brother DCP-330C All-In-One InkJet Printer

1 Answer

Print error code 50 on a brother dcp-330c

Error code #50 refers to a paper jam. Although you may not see any paper in the feed channel/chute, there is either a small fragment of paper or dust interfering with your machine's ability to feed. A good way to ensure there's no blockage is to blow it out with compressed air including the rear panel where dust/dirt tends to hide. Short of that, you can try to reset the error code by disconnecting all cords (including power cord) for 10 minutes or so and upon reconnecting, the fault should clear but keep in mind, if there is an obstruction, the error will return. Hope this clarifies you error message. Best of luck!

Nov 08, 2009 | Brother DCP-330C All-In-One InkJet Printer

1 Answer

Printer will not print message No Paper Fed yet paper in tray

Hello Phillip_hell !!

Thank you for writing to

Here's a Knowledge Base article on the Brother's website for this problem. Just follow the instructions carefully & I am sure enough you'll not be disappointed. Here's the link:

This article explains step by step to fix this issue.

Hope this would be helpful & remember to mark the thread if you find this helpful.

Warm Regard's
Anurag Shukla

Sep 03, 2009 | Brother DCP-330C All-In-One InkJet Printer

1 Answer

No manual need help

Contact Brother with model and serial numbers. They should have one you can download.

Apr 29, 2009 | Brother DCP-330C All-In-One InkJet Printer

1 Answer

Brother DCP 330C 'unable to clean 46' printer will not print

responded to this on a error 46 post by joachim.


Mar 24, 2009 | Brother DCP-330C All-In-One InkJet Printer

2 Answers

Prints on copier not from pc

Try updating the driver, it should be available from Brother's website.

Sep 20, 2008 | Brother DCP-330C All-In-One InkJet Printer

2 Answers

Brother DCP 330C

This COULD BE that there is some paper stuck in the dcp. Open cover and try to see if there is some paper left in the machine. I ve noticed, that -seeing from behind!- on the right side paperpieces are stuck and disturb the disk (foil) which give the printer info what to do. Open cover and try to look into the edges (seeing from the front: its the left side -where the modell name is printed) In some cases this means that the purgecamshaft is defective.

Aug 17, 2007 | Brother DCP-330C All-In-One InkJet Printer

Not finding what you are looking for?
Brother DCP 130C All-In-One InkJet Printer Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

478 Answers


Level 3 Expert

379 Answers


Level 3 Expert

824 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides